Modular Intelligent Substation - Kafin Ilimin Dukkana na Tashar Gida na Annabiya a Gaba-gaban Daidai

A cikin hankali na tattalin arzikin da kungiyar jama'a, abubuwan da aka sanya don gaba da kayan addinin da kuma fanni na tattalin arziki suka zama mafi kyau. Zan iya canza yawan ci gaban da kuma kayan addinin masana'antu suka bayar da sakamako wajen inganta tushen masana'antu prefabricated cabin - type intelligent substations. Annabi, a cikin tushen masana'antu na biyu a nan, akwai yawan aiki mai yawa, kuma ya kamata a yi shi a nan. Kuma a yi tushen nan a nan, za a sake koyar har zuwa idan an kammala tushen masana'antu kamar kasa da kuma primary electrical engineering. Wannan yana iya rage yawan lokacin. Daga baya, ta haka haka, tushen masana'antu na biyu suke takarda da duk aikin ta hanyar manufacturer, wanda ke inganta tushen aiki a factory, kuma yana haifar da yawan wiring a nan. Amma, yana iya haifar da yawan aiki a cikin tushen design, construction, da kuma commissioning, kuma yana haifar da yawan aiki a cikin maintenance da repair, kuma yana iya rage yawan lokacin.

1 Kyakkyawan Fanni na Prefabricated Cabins

Prefabricated cabin ya bayar da sabon yanayin tushen substation na "standardized design, factory-based processing, and prefabricated construction", wanda tana da muhimmanci sosai:

• Sabon Yanayin Tushen: Yana haifar da yawan kasa, yana haifar da yawan tsaunukan al'amuran, yana haifar da yawan tashizun ruwa, kuma yana rage yawan lokacin a nan da kuma commissioning cycles na intelligent substations, wanda ke inganta tushen masana'antu da kusa;

• Sabon Fanni: Aikin modular design yana haifar da yawan disassembly, assembly, da kuma combination, yana taimakawa wajen karfin sarrafa equipment, yana ba da taimaki a cikin tushen maintenance component library, kuma yana haifar da yawan tashizun intervals; Aikin general-purpose technology yana haifar da yawan assembly, yana haifar da yawan energy, yana haifar da yawan tsaunukan al'amuran, yana inganta yawan efficiency a nan, kuma yana ba da taimaki a cikin safety da kuma kayan addini;

• Sabon Fanni na Automation: Yana inganta kayan addinin da kuma security reliability na substations, yana inganta industrial facility attributes, kuma yana bayar da taimaki a cikin green da kuma healthy development na smart grid.

2 Modular Secondary Combined Equipment and Its Advantages
2.1 Basic Definition

Masana'antar combined secondary na prefabricated cabin sun hada da prefabricated cabin, secondary equipment cabinets, da kuma secondary equipment. Duk aikin masana'antar biyu ana takarda a factory, kuma wiring bayan cabinets ana kammala a factory. Ana karkashin zuwa nan kamar yadda, don inganta connection with primary equipment da kuma civil engineering. Yanzu, modular combination ana karkashin zuwa nan a cikin characteristics na system na biyu da kuma primary objects it serves.

2.2 Core Advantages

Masana'antar modular secondary combined yana inganta implementation of "standardized design, factory-based processing, and prefabricated construction". Components na structures suna takarda a factory, yana ba da taimaki a cikin plug-and-play of primary and secondary equipment, kuma yana bayar da intelligent substation na full prefabrication and assembly. Abubuwan da suka fi shi muhimmanci sun hada da:

• Haifatar Kasa da Tsaunukan Al'amuran: Ta haka haka, tana haifar da building area da kuma yawan kasa, tana rage yawan installation links, kuma tana haifar da yawan tsaunukan al'amuran;

• Efficient Integration: Masana'antar biyu ana takarda, installed, da kuma wired a factory, integrating functions, improving the integration degree, saving equipment resources, reducing on-site workload, and meeting the requirements of "resource-saving";

• Optimized Commissioning: Innovates the "factory joint commissioning + on-site commissioning" mode. The factory simulates the operation scenario, completes the solidification of SCD files (such as the whole-station five-prevention logic and signal point table naming), and only needs to conduct transmission verification with primary equipment on-site;

• Simplified Design: After factory joint commissioning, a complete virtual terminal point table is generated, which can be attached to the design documents as needed to meet the requirements of dispatching in various regions;

• Cost Reduction: The secondary equipment is arranged in the distribution interval on-site, shortening the length of secondary optical cables and cables, saving materials, and reducing costs

• Construction Period Compression: Changes the serial construction to parallel construction, saving more than 60% of the on-site commissioning cycle.

3 Current Status of the Secondary System of Intelligent Substations

A cikin current construction of intelligent substations, the on-site installation and commissioning of secondary equipment have obvious problems:

• Process Constraints: The installation of secondary cabinets depends on the completion of civil engineering, and the optical/cable wiring of the secondary system can only be carried out after the cabinets are in place. As a result, the commissioning of the secondary system is restricted by the construction progress of civil engineering and primary equipment, prolonging the cycle;

• Low Efficiency: There are many commissioning projects and complex technologies. The after-sales personnel of the manufacturer need to be stationed on-site, which is difficult to meet the needs of large-scale promotion, and the efficiency is limited;

• Environmental Hazards: There is a lot of dust on-site, and the optical ports of secondary equipment are not well protected, affecting the performance and service life of the devices;

• Increased Land Occupation: Conventional secondary equipment requires an independent control room, occupying land resources, increasing civil engineering volume, and is not conducive to land conservation.

4 Conclusion

Compared with conventional substations, the prefabricated cabin-type combined secondary equipment has prominent advantages:

• Land-saving and Environmental Protection: Reduces building land occupation, eliminates multiple links in building construction (structure, masonry, decoration, electrical installation, etc.), reduces environmental pollution and dust impact, creates an excellent environment for the equipment in the cabin, and ensures safety and reliability;

• Efficiency Improvement and Cost Reduction: The parallel construction mode improves the efficiency of design and construction, significantly shortens the construction period; reduces on-site commissioning projects of secondary equipment. Moreover, due to the use of environmentally friendly integrated materials and on-site arrangement in the distribution interval, the length of secondary optical/cables is shortened, and the project cost is reduced.

Through technological innovation, the prefabricated cabin-type intelligent substation meets the development needs of the power grid, and has remarkable effects in cost reduction, efficiency improvement, and green construction, and has extensive promotion value.