10kV High-voltage series reactors for Serial Connection
Key attributes
| Brand | POWERTECH |
| Model NO. | High-voltage series reactors |
| Rated voltage | 10kV |
| Capacity | 5KVar |
| Series | CKSC |
Product descriptions from the supplier
Function：
The series reactor is connected in series with the shunt capacitor group, which has the functions of compensating the reactive power of the power grid, improving the power factor, suppressing the harmonic current, limiting the closing inrush current, etc., and is suitable for the power system, electrified railway, metallurgy, petrochemical and other high fire protection requirements. Places such as urban grid substations, underground substations and microcomputer-controlled substations with limited electromagnetic interference requirements and installation space.
Parameters to be provided when ordering：
The rated capacity of the reactor.
System rated voltage and frequency.
Capacitor terminal voltage.
Rated reactance or reactance rate of reactor.
Rated current and continuous current.
Dynamic and thermal stability current and duration.
Other special requirements.
Standard:
IEC289-88 "reactor".
GB10229-88 "Reactor".
JB5346-98 "Reactor".
DL462-92 "Technical Conditions for Ordering Series Reactors for High Voltage Shunt Capacitors".
Structural characteristics:
The reactor is divided into three phase and single phase, both of which are epoxy casting.
The core is made of low-loss cold-rolled oriented silicon steel sheet, which is punched and sheared by a high-speed punch, which has small burrs, regular uniformity, and neat and beautiful lamination, so as to ensure the performance of low temperature rise and low noise during the operation of the reactor.
The coil is epoxy casting, the coil is reinforced by laying epoxy glass mesh cloth inside and outside, and the F-class epoxy casting system is used to pour in a vacuum state, the coil not only has good insulation performance, but also has good mechanical strength, and can withstand large current impact and cold and hot shock without cracking.
The epoxy casting coil does not absorb water, has low partial discharge, and can operate safely under harsh environmental conditions.
The upper and lower ends of the coil are made of epoxy cushion blocks and silicone rubber shockproof pads, which effectively reduce the vibration of the coil during operation.
Conditions for the use:
The altitude does not exceed 2000 meters.
The operating environment temperature is -25°C~+40°C, and the relative humidity is not more than 93%.
There are no harmful gases around, no flammable and explosive materials.
The surrounding environment should have good ventilation conditions.
Insulation Grade: Class F, Reactor Noise: ≤45dB
Overload capacity: continuous operation at ≤ 1.35 times
The uneven transverse between the phases of the reactor is not more than ±3%, and the inductance error is controlled within +3%.
Insulation level: LI75AC35kV
What is the principle of inductance characteristics of a reactor?
Inductive Characteristics Principle:
Reactors operate based on the principle of electromagnetic induction. When current flows through the windings, a magnetic field is generated in the core. According to Lenz's Law, this magnetic field opposes the change in current, thereby limiting the rate of change of the current.
For example, in an alternating current (AC) circuit, where the current is continuously changing, the inductance of the reactor causes the current to lag behind the voltage in phase. This phase shift results in the generation of reactive power, which can be used for reactive power compensation in the circuit.
In a direct current (DC) circuit, reactors can smooth out the current, reducing fluctuations and providing a more stable current flow.
Related Products
-
Air-Core Smoothing current-limiting Reactors
-
Air-Core Series current-limiting Reactors
-
Air-Core Split current-limiting Reactors
-
Air-Core Current Limiting Reactors
-
6kV 10kV High-voltage starting reactor with F Insulation Class
-
800kV 1100kV Smoothing Reactor Connected in Series
-
40-500kHz Line Traps for Serial Connection
Related Knowledges
-
Impact of DC Bias in Transformers at Renewable Energy Stations Near UHVDC Grounding ElectrodesImpact of DC Bias in Transformers at Renewable Energy Stations Near UHVDC Grounding ElectrodesWhen the grounding electrode of an Ultra-High-Voltage Direct Current (UHVDC) transmission system is located close to a renewable energy power station, the return current flowing through the earth can cause a rise in ground potential around the electrode area. This ground potential rise leads to a shift in the neutral-point potential of nearby power transformers, inducing DC bias (or DC offset) in their01/15/2026 -
HECI GCB for Generators – Fast SF6 Circuit Breaker1.Definition and Function1.1 Role of the Generator Circuit BreakerThe Generator Circuit Breaker (GCB) is a controllable disconnect point located between the generator and the step-up transformer, serving as an interface between the generator and the power grid. Its primary functions include isolating generator-side faults and enabling operational control during generator synchronization and grid connection. The operating principle of a GCB is not significantly different from that of a standard c01/06/2026 -
Distribution Equipment Transformer Testing, Inspection, and Maintenance1.Transformer Maintenance and Inspection Open the low-voltage (LV) circuit breaker of the transformer under maintenance, remove the control power fuse, and hang a “Do Not Close” warning sign on the switch handle. Open the high-voltage (HV) circuit breaker of the transformer under maintenance, close the grounding switch, fully discharge the transformer, lock the HV switchgear, and hang a “Do Not Close” warning sign on the switch handle. For dry-type transformer maintenance: first clean the porcel12/25/2025 -
How to Test Insulation Resistance of Distribution TransformersIn practical work, insulation resistance of distribution transformers is generally measured twice: the insulation resistance between thehigh-voltage (HV) windingand thelow-voltage (LV) winding plus the transformer tank, and the insulation resistance between theLV windingand theHV winding plus the transformer tank.If both measurements yield acceptable values, it indicates that the insulation among the HV winding, LV winding, and transformer tank is qualified. If either measurement fails, pairwise12/25/2025 -
Design Principles for Pole-Mounted Distribution TransformersDesign Principles for Pole-Mounted Distribution Transformers(1) Location and Layout PrinciplesPole-mounted transformer platforms should be located near the load center or close to critical loads, following the principle of “small capacity, multiple locations” to facilitate equipment replacement and maintenance. For residential power supply, three-phase transformers may be installed nearby based on current demand and future growth projections.(2) Capacity Selection for Three-Phase Pole-Mounted Tr12/25/2025 -
Transformer Noise Control Solutions for Different Installations1.Noise Mitigation for Ground-Level Independent Transformer RoomsMitigation Strategy:First, conduct a power-off inspection and maintenance of the transformer, including replacing aged insulating oil, checking and tightening all fasteners, and cleaning dust from the unit.Second, reinforce the transformer foundation or install vibration isolation devices—such as rubber pads or spring isolators—selected based on the severity of vibration.Finally, strengthen sound insulation at weak points of the ro12/25/2025
Related Solutions
-
Core Value and Innovative Applications of 12kV Medium Voltage Switchgear in Smart SubstationsWith the Rapid Development of Smart Grids and the Integration of Renewable Energy Medium Voltage (MV) Switchgear, as the core power distribution equipment in substations, directly determines the stability of the power system through its reliability, intelligence, and space efficiency. This article delves into the key technologies, scenario-specific solutions, and practical benefits of Medium Voltage Switchgear in substations.Core Requirements for Substation ScenariosHigh Reliability Requirements06/12/2025 -
Withdrawable 12kV Medium Voltage Switchgear: The Indispensable Pivot of Flexibility and Safety in Smart GridsAt the core of medium-voltage power distribution systems in industrial facilities, commercial complexes, and data centers, switchgear acts as a silent commander, governing the lifeline of electrical flow. Among various solutions, Withdrawable Switchgearhas become synonymous with reliability in modern MV systems due to its unique design philosophy. Compared to fixed switchgear, its "withdrawable" feature delivers compelling advantages, setting new benchmarks for operational efficiencyand per06/12/2025 -
Core Dilemma in Southeast Asia 12kV Medium Voltage SwitchgearSoutheast Asia’s rapidly growing power demand (GDP growth >5% annually) combined with extreme climatic conditions—high temperature, humidity, and salt spray corrosion—necessitates balancing lifecycle costs with climate resilience in switchgear selection. This article analyzes the optimal cost-performance solutions between GIS and AIS.I. GIS vs. AIS Cost Comparison Model (Southeast Asia Context)1. Initial Investment Costs2. Long-Term Operational CostsGIS Advantages:Ext06/12/2025
