Will the voltages of two different currents drawn from an AC source add up?

Encyclopedia
09/21/2024

Will the voltages of two different currents drawn from an AC source add up?


The voltages of two different currents drawn from an AC (Alternating Current) source do not simply add up in the way that might be expected with direct current (DC) sources. To understand why, it's important to consider how voltage and current behave in AC circuits.


Key Concepts in AC Circuits


Impedance (Z): In AC circuits, impedance is the measure of the total opposition that a circuit presents to a current due to the presence of resistance (R), inductance (L), and capacitance (C). Impedance is a complex quantity that includes both magnitude and phase angle.


Phase Relationship: In AC circuits, the voltage and current can be out of phase due to the presence of reactive components like inductors and capacitors. This phase difference is critical when considering the behavior of voltage and current.


Vector Addition: Unlike DC circuits, where voltage drops across components can be added algebraically, in AC circuits, voltage drops must be added vectorially because they can be out of phase.


Voltage and Current Relationships


In an AC circuit, the relationship between voltage (V), current (I), and impedance (Z) is given by:


V=IZ


Here, V, I, and Z are all phasors, which include both magnitude and phase information.


Two Different Currents Drawn from an AC Source


Consider a scenario where two different currents (I1and I2) are drawn from an AC source. Each current will have its own impedance (Z1 and Z2) and associated voltage (V1 and V2):


V1=I1Z

V2=I2Z


If these currents are flowing through different parts of the same circuit or different branches in parallel, the voltages across each branch (V1and V2) do not simply add up. Instead, the total voltage across the entire circuit depends on the configuration of the circuit and the phase relationships between the currents and voltages.


Parallel Connection


If the two currents (I1 and I2) are flowing through different branches in parallel, the voltages across each branch will be the same because they share a common node:

 

V1=V2=V


In this case, the total current (I total) is the sum of the individual currents:


I total=I1+I2


Series Connection


If the two currents (I1 and I2) are flowing through different components in series, the total voltage across the series combination will be the vector sum of the individual voltages:


V total=V1+V2


However, because V1and V2are phasors, the addition must account for the phase differences:

 

f60969a1284531b1e6475bdc0dccd619.jpeg

 

θ is the phase angle between V1and V 2


Summary


In summary, the voltages of two different currents drawn from an AC source do not simply add up because:


  • Phase Differences: Voltages in AC circuits must be considered with respect to phase differences.


  • Complex Impedances: Impedances involve both magnitude and phase, affecting the relationship between voltage and current.


Encyclopedia

The Electricity Encyclopedia is dedicated to accelerating the dissemination and application of electricity knowledge and adding impetus to the development and innovation of the electricity industry.

What is Biot Savart Law?
What is Biot Savart Law?
The Biot-Savart Law is employed to determine the magnetic field intensity dHnear a current-carrying conductor. In other words, it describes the relationship between the magnetic field intensity generated by a source current element. This law was formulated in 1820 by Jean-Baptiste Biot and Félix Savart. For a straight wire, the direction of the magnetic field adheres to the right-hand rule. The Biot-Savart Law is also referred to as Laplace’s law or Ampère’s law.Conside
Edwiin
05/20/2025
What is Peak Inverse Voltage (PIV)?
What is Peak Inverse Voltage (PIV)?
DefinitionThe maximum value of the reverse voltage that a PN junction or diode can withstand without damage is termed thePeak Inverse Voltage (PIV). This PIV rating is specified and explained in the datasheet provided by the manufacturer.However, if the voltage across the junction under reverse bias exceeds this specified value, the junction will be damaged.As shown in the figure above, a PN junction or diode is commonly used as a rectifier, i.e., to convert alternating current (AC) to direct cu
Edwiin
05/19/2025
What is Magnetoresistor?
What is Magnetoresistor?
Definition: When the resistance of certain metals and semiconductor materials changes in the presence of a magnetic field, this phenomenon is referred to as the magnetoresistance effect. The components that exhibit this effect are called magnetoresistors. Put simply, a magnetoresistor is a type of resistor whose resistance value fluctuates with the strength and direction of an external magnetic field.Magnetoresistors play a crucial role in detecting the presence of a magnetic field, measuring it
Encyclopedia
05/10/2025
How does the input voltage affect the current flowing through the load resistor in an ideal transformer?
How does the input voltage affect the current flowing through the load resistor in an ideal transformer?
How Input Voltage Affects the Current Through a Load Resistor in an Ideal TransformerAn ideal transformer is one that assumes no energy losses (such as copper loss or iron loss). Its primary function is to change the levels of voltage and current while ensuring that the input power equals the output power. The operation of an ideal transformer is based on the principle of electromagnetic induction, and there is a fixed turns ratio n between the primary and secondary coils, given by n=N2 /N1, whe
Encyclopedia
01/24/2025
Inquiry
Download
IEE-Business is dedicated to serving the personnel in the global power industry.
Join IEE-Business, not only can you discover power equipment and power knowledge, but also canhnd like - minded friends!