Machine room inspection robot
Key attributes
| Brand | Wone Store |
| Model NO. | Machine room inspection robot |
| Series code | 300 |
| Product edition code | Standard edition |
| Series | RW-300 |
Product descriptions from the supplier
The computer room inspection robot is an intelligent robot that realizes autonomous movement, self-management, automatic obstacle avoidance, and automatic charging. The intelligent inspection robot can perform continuous and uninterrupted inspection operations, and it is a solution for automated inspection of indoor equipment status through intelligent robots. The robot is equipped with a visible light camera on a liftable platform, which can flexibly adjust the height of the camera to realize inspections from different angles and improve inspection efficiency.
The computer room inspection robot can be applied to indoor venues such as IDC data computer rooms / equipment computer rooms / information computer rooms / communication computer rooms / power distribution rooms / main control rooms / switch rooms / high-voltage switchgear rooms.
Product function
Scheduled and fixed-point cruising
Infrared temperature measurement
Automatic navigation
Fault alarm
Visible light video analysis
Temperature and humidity monitoring
Data analysis
Automatic detection
Voice intercom
5G communication
Equipped with a liftable platform
Partial discharge detection
AI intelligent recognition
Mian feature
Object-oriented: Computer room
RW300 is an intelligent inspection robot designed for inspections in areas such as computer rooms, power distribution rooms, and switch rooms.Image recognition
Automatically recognize meter readings, recognize the status of meters and switches.Thermal infrared imaging
Infrared intelligent extraction technology identifies the temperature of connectors and incoming and outgoing lines.Noise detection
Noise spectrum analysis, identification of station equipment and environmental noise.Gas detection
Equipped with gas sensors to collect environmental gas quantity and monitor the environment.Partial Discharge Detection
Three-level robotic arm lifting + telescopic robotic arm, integrated detection function of transient low voltage and ultrasonic wave.
Technology Parameters
Basic Performance Parameters
Display Screen
Motion Performance
Thermal Imaging Camera
Robot Operating Environment and Protection
Applicable Environment
Indoor inspection of power distribution rooms, IDC computer rooms, equipment rooms, information machine rooms, communication machine rooms, main control rooms, switch rooms, high-voltage switchgear rooms, etc.
Two-way Voice Intercom
5-meter far-field pickup microphone array, ultra-low sound high-fidelity speaker
Related Products
Related Knowledges
-
Fault Diagnosis and Troubleshooting of 10kV High-Voltage SwitchgearI. Common Fault Types and Diagnostic MethodsElectrical Faults Circuit Breaker Failure to Operate or Maloperation: Check the energy storage mechanism, closing/tripping coils, auxiliary switches, and secondary circuits. High-Voltage Fuse Blown: Measure voltage across the fuse terminals; inspect busbar joints, cable terminations, and protection relay settings. Busbar Discharge or Insulator Damage: Listen for discharge sounds, check temperature at busbar connections, and visually inspect insulatorsGarca09/26/2025 -
Types and Common Fault Analysis of High-Voltage SwitchgearTypes and Common Fault Analysis of High-Voltage SwitchgearHigh-voltage switchgear is a critical electrical device in power systems. Deterioration in switchgear operation is one of the main causes of power system failures. What are the common faults in high-voltage switchgear?(1) Outdoor and Indoor TypesBased on installation environment, high-voltage switchgear can be classified as outdoor or indoor types. Equipment rated at 10 kV and below is mostly installed indoors. According to primary circuiLeon09/26/2025 -
What is an oil-immersed transformer?Oil-Immersed Transformers: Overview, Features, and ApplicationsAn oil-immersed transformer is a widely used type of power transformer that employs a liquid—typically insulating oil—as both an insulating and cooling medium.Key Features of Oil-Immersed Transformers: Insulating Oil: Insulating oil serves as the primary dielectric medium, electrically isolating the windings from the core and ground. With its high dielectric strength, it effectively prevents electrical breakdown between windings or bVziman09/26/2025 -
Why is it necessary to measure the absorption ratio of electrical equipment?The absorption ratio is defined as follows: When operating a megohmmeter (insulation resistance tester), rotate the handle at a speed of 120 revolutions per minute. Record the insulation resistance reading at 15 seconds (R15) and then at 60 seconds (R60). The absorption ratio is calculated using the formula:Absorption Ratio = R60 / R15, which should be greater than or equal to 1.3.Measuring the absorption ratio helps determine whether the insulation of electrical equipment is damp. When insulatiEncyclopedia09/26/2025 -
Operational Analysis and Maintenance Strategies for High-Voltage Disconnect Switches in Power SystemsI. Operational Analysis1.1 Operating ScopeHigh-voltage disconnect switches are classified into outdoor and indoor types based on installation location, and into three-pole or single-pole configurations according to the number of poles. During operation, attention must be closely paid to the switch’s operating current and voltage.If the operating voltage exceeds the rated value, discharge may occur within the porcelain insulator. The degree of heating is closely related to the operating current aGarca09/26/2025 -
Analysis of Arcing Hazards in High-Voltage Disconnect Switches and Preventive MeasuresDuring the operation of high-voltage disconnect switches, arcs may form between the contacts when they separate while current is still flowing. The high temperature of the arc not only damages the switch contacts but can also ignite surrounding flammable materials, leading to safety accidents.Arc formation is influenced by various factors, including the type of current (DC or AC), the inductive and capacitive characteristics of the circuit, and the properties of the contact materials. In DC systEdwiin09/26/2025
Related Solutions
-
Dedicated Vacuum Contactor Solution for Port Shore Power SystemsI. Background and ChallengesShore power systems have become core technical equipment for ports to reduce carbon emissions and noise pollution. However, these systems face two major challenges in the harsh operational environment of ports:Severe Environmental Corrosion: High humidity and salt spray in port areas cause serious corrosion to metal components and enclosures of electrical equipment, significantly impacting electrical lifespan and operational reliability.High Switching Requirements:Wone Store09/13/2025 -
ABB Vacuum Contactor KC2 Power Supply System Technical Transformation PlanIssue OverviewThe 10kV air compressor starting system of a company utilizes the ABB vacuum contactor KC2 as the control component for the operating circuit. The dedicated wide-voltage power supply module paired with this contactor presents the following issues:Frequent failures: The power supply module fails to properly transition the voltage from 300V to 12V, resulting in fuse blowouts.Poor heat dissipation: Enclosed installation of the module leads to insufficient heat dissipation, accelerWone Store09/13/2025 -
Solution for Medium-Voltage Motor Control and Protection Using Vacuum Contactor-Fuse (VCF) in a Coal Conveying System1.Project BackgroundA coal conveying system comprises 15 belt conveyors driven by medium-voltage motors. The system operates under complex conditions, with motors often subjected to heavy loads and frequent starts. To address these challenges and achieve effective control and reliable protection during motor startup, the project comprehensively adopts Vacuum Contactor-Fuse (VCF) combination devices for the 6kV medium-voltage motor power distribution. This solution details the technical features,Wone Store09/13/2025
