215KWh Industrial and commercial energy storage
Key attributes
| Brand | RW Energy |
| Model NO. | 215KWh Industrial and commercial energy storage |
| Rated Output Rating | 100kw |
| Energy storage capacity | 215kWh |
| Cell quality | Class A |
| Series | Industrial&Commercial energy storage |
Product descriptions from the supplier
Description：
Commercial and industrial photovoltaic energy storage system consists of a built-in 60KW MPPT controller module, a 100KW PCS (Power Conversion System), and a 240KW STS (Smart Static Switching) module. · It utilizes a professional air conditioning system in the energy storage cabinet for intelligent temperature regulation. It is equipped with a gas-based fire suppression system, as well as temperature and humidity sensors, water intrusion sensors, BMS (Battery Management System), and EMS (Energy Management System). · An independent UPS (Uninterruptible Power Supply) provides backup power specifically for the EMS, allowing users to view system faults even in the event of a power outage.
System Parameters:
MPPT Controller Module Parameters:
ON-Grid/OFF-Grid Parameters:
(Automatic bypass requires configuring an STS)
Battery Pack:
What is a PCS system？
PCS (Power Conversion System) is a key component in an energy storage system and is mainly used for conversion between direct current (DC) and alternating current (AC). The PCS system plays a crucial role in energy storage solutions. It connects energy storage batteries to the power grid or loads to achieve effective storage and release of electricity.
Working principle：
Charging process:When the PCS is in charging mode, it converts alternating current from the power grid or renewable energy sources into direct current, and then stores this electrical energy in the battery through the battery management system (BMS).The BMS monitors the state of the battery and ensures that the battery is charged within a safe range.
Discharging process:When the PCS is in discharging mode, it converts the direct current in the battery into alternating current for use by loads or transmission to the power grid.The BMS continues to monitor the state of the battery and ensures that the battery is discharged within a safe range.
Grid interaction:The PCS can perform charging and discharging operations according to the needs of the power grid and participate in the auxiliary services of the power grid.Through the intelligent scheduling algorithm of the energy management system (EMS), the PCS can optimize the charging and discharging strategies of the energy storage system and improve economic benefits.
Built in industrial grade air conditioning, combined with temperature, humidity, and water immersion sensors, can operate stably in complex environments such as high temperature, high humidity, and dust.
Yes, the system is equipped with an independent UPS to supply power to EMS. Even if the main power grid loses power, users can still view fault information and operation data through the local screen or APP.
Yes, the system is equipped with an independent UPS to supply power to EMS. Even if the main power grid loses power, users can still view fault information and operation data through the local screen or APP.
Integrated 60kW MPPT controller, 100kW PCS, 240kW STS intelligent static switch, Class A battery cells, BMS, EMS, and independent UPS to achieve "plug and play" functionality.
Related Products
-
LFP All-in-One Energy Storage Battery with Inverter & Controller
-
5.12kWh low-voltage wall-mounted lithium battery
-
5-20 kWh AC/ DC / Hybrid-Coupling residential energy storage system
-
Class-A 5.12KWh Low Voltage Energy Storage Battery for Energy Storage System
-
4.8kWh 5.12kWh Commercial Use Stacked energy storage battery
-
9.6KWh/10.24KWh Household Column energy storage battery
-
2.4–10.24 KWh Household Wall - Mounted Energy Storage Battery
Related Knowledges
-
Faults and Handling of Single-phase Grounding in 10kV Distribution LinesCharacteristics and Detection Devices for Single-Phase Ground Faults1. Characteristics of Single-Phase Ground FaultsCentral Alarm Signals:The warning bell rings, and the indicator lamp labeled “Ground Fault on [X] kV Bus Section [Y]” illuminates. In systems with a Petersen coil (arc suppression coil) grounding the neutral point, the “Petersen Coil Operated” indicator also lights up.Insulation Monitoring Voltmeter Indications:The voltage of the faulted phase decreases (in01/30/2026 -
Neutral point grounding operation mode for 110kV～220kV power grid transformersThe arrangement of neutral point grounding operation modes for 110kV～220kV power grid transformers shall meet the insulation withstand requirements of transformer neutral points, and shall also strive to keep the zero-sequence impedance of substations basically unchanged, while ensuring that the zero-sequence comprehensive impedance at any short-circuit point in the system does not exceed three times the positive-sequence comprehensive impedance.For 220kV and 110kV transformers in new constructi01/29/2026 -
Why Do Substations Use Stones, Gravel, Pebbles, and Crushed Rock?Why Do Substations Use Stones, Gravel, Pebbles, and Crushed Rock?In substations, equipment such as power and distribution transformers, transmission lines, voltage transformers, current transformers, and disconnect switches all require grounding. Beyond grounding, we will now explore in depth why gravel and crushed stone are commonly used in substations. Though they appear ordinary, these stones play a critical safety and functional role.In substation grounding design—especially when multiple gr01/29/2026 -
Why Must a Transformer Core Be Grounded at Only One Point? Isn't Multi-Point Grounding More Reliable?Why Does the Transformer Core Need to Be Grounded?During operation, the transformer core, along with the metal structures, parts, and components that fix the core and windings, are all situated in a strong electric field. Under the influence of this electric field, they acquire a relatively high potential with respect to ground. If the core is not grounded, a potential difference will exist between the core and the grounded clamping structures and tank, which may lead to intermittent discharge.I01/29/2026 -
Understanding Transformer Neutral GroundingI. What is a Neutral Point?In transformers and generators, the neutral point is a specific point in the winding where the absolute voltage between this point and each external terminal is equal. In the diagram below, pointOrepresents the neutral point.II. Why Does the Neutral Point Need Grounding?The electrical connection method between the neutral point and earth in a three-phase AC power system is called theneutral grounding method. This grounding method directly affects:The safety, reliabilit01/29/2026 -
What’s the Difference Between Rectifier Transformers and Power Transformers?What is a Rectifier Transformer?"Power conversion" is a general term encompassing rectification, inversion, and frequency conversion, with rectification being the most widely used among them. Rectifier equipment converts input AC power into DC output through rectification and filtering. A rectifier transformer serves as the power supply transformer for such rectifier equipment. In industrial applications, most DC power supplies are obtained by combining a rectifier transformer with rectifier equ01/29/2026
Related Solutions
-
Distribution automation systems solutionsWhat are the difficulties in overhead line operation and maintenance?Difficulty one:Overhead lines of distribution network have wide coverage,complicatedterrain,many radiation branches and distributed power supply,resultingin "many line faults and difficulty in fault troubleshooting".Difficulty Two:Manual troubleshooting is time-consuming and laborious.Meanwhile,therunning current,voltage and switching state of the line cannot be graspedin real time,because of the lack of intelligent technical m04/22/2025 -
RW8000 DMS Distribution Management System SolutionsOverviewNowadays, the development trend of power grid is intellectualization. As an important part of power grid, the power distribution system is very close to the customers and it has to run properly. The distribution management system (DMS）played an important role in it.Introduction:RW8000 power distribution management system (DMS) is designed for the smart grids. It is based on real-time application, centered on distribution network operation and management, focusing on the business process09/07/2023 -
High-Precision Electrical Parameter Monitoring System Solution1.IntroductionWith the increasingly stringent requirements for power supply quality in high-end facilities such as precision manufacturing, medical diagnosis, and data centers, traditional power monitoring systems, due to their low sampling accuracy and weak data analysis capabilities, can no longer meet the demand for deep insight and precise management of power quality. In response, we are introducing a new generation High-Precision Electrical Parameter Monitoring System. With millisecond-l09/28/2025
