Class-A 5.12KWh Low Voltage Energy Storage Battery for Energy Storage System

Features

• > 6,000 cycles backed by Jinkosolar 10-years authoritive warranty.
  

• Multiple battery protections including communication, MOS, 2nd fault mandatory protection to enable overall full protection.

• Compatible to charge/discharge at 0.5C and 1C, but at 0.5C is recommended.

• Protection rating at IP65, cell-level independent fire-proof design, fire-resistant material can be exposed to 1200 degrees Celsius flame.

• Compatible to diseal engine power plants and UPS application with on/off grid shifting times as low as 10 seconds.

• Plug and play connecion saves 40% installation time.（no professional electrician needed for home use）

• Over 35 technical and services centers globally, world-widely distributed network and parters.

• All-in-one PV+ solution provides packed warranty, one-stop service and support.

   

In The Energy System Architecture

Technology Parameters

Physical

Electrical

Operation

Certification

•  Power button

•  LED indicator 

•  Hidden handle

• Hidden cable connection box

Working principle：

• Charging process:When the battery is charging, lithium ions are deintercalated from the cathode material (LiFePO4), move to the anode (usually graphite) through the electrolyte, and combine with the anode material to form a lithium intercalation compound.Electrons flow from the cathode to the anode through the external circuit to form a current.

• Discharging process:When the battery is discharging, lithium ions are deintercalated from the anode, move back to the cathode through the electrolyte, and at the same time, electrons flow from the anode to the cathode through the external circuit to provide electrical energy to the load.

Application scenarios

1. UPS backup power supply for small commercial premises (such as convenience stores, small offices)Adaptation advantages: The product supports UPS system access, and the off-grid switching time is no more than 10 seconds, which can quickly respond to sudden power outages in the power grid; The IP65 dustproof and waterproof design can be installed in the corner of the store or outdoors without additional protection; A single battery pack can support cash registers, refrigerators, and emergency lighting to work continuously for 4-6 hours, avoiding problems such as product deterioration and loss of cash register data caused by power outages, and is especially suitable for 24-hour convenience stores, community supermarkets and other scenarios.

2. Home emergency energy storage (to cope with extreme weather or power grid fluctuations)Adaptation advantages: -30℃~55℃ wide temperature range, plug-and-play design without professional electricians, ordinary families can install it on the balcony or garage by themselves; The 5.12kWh capacity can meet the continuous power supply of refrigerators (0.8kWh per day), routers (0.1kWh per day), and lighting (0.2kWh per day) for 3-5 days, solving the problem of long-term power outages caused by disasters such as typhoons and heavy rains, and ensuring basic household electricity needs.

3. Energy storage supporting diesel generators in remote areas (such as rural workshops, outdoor operations)Adaptation advantages: It can be linked with diesel generators to make up for the shortcoming of generator startup delay —— when the power grid is cut off, the battery supplies power first, and then switches after the generator starts to avoid power supply interruption; The low-voltage characteristic is adapted to the output voltage of small diesel generators, without additional voltage converters; 6000 long cycle life, which can be used for frequent charging and discharging, suitable for scenarios such as rural workshops and outdoor infrastructure construction sites where "the power grid is unstable and dependent on generators", reducing the frequency of generator startup and shutdown and fuel consumption.

4. Supporting small household wind-solar energy storage systems (such as household photovoltaics / small wind power)Adaptation advantages: It supports linkage with household photovoltaic panels and small wind turbines, can store excess electricity generated by wind and solar energy during the day, and supply it to household lighting, washing machines and other equipment at night, reducing dependence on the power grid; IP65 protection can be installed on the roof or courtyard together with wind and solar equipment, with weather resistance matching the outdoor environment, and the plug-and-play design simplifies the installation process of the whole system, suitable for family users pursuing "clean energy saving + electricity bill saving".