60Kwh 3-phase Battery energy storage system of cabinet
Key attributes
| Brand | RW Energy |
| Model NO. | 60Kwh 3-phase Battery energy storage system of cabinet |
| Rated voltage | 400V |
| Rated frequency | 50/60Hz |
| Rated Output Rating | 30KW |
| Battery Capacity | 56.5kWh |
| Series | PQpluS Series |
Product descriptions from the supplier
Overview
In today world, commercial and industrial (C&I) customers are becoming electricity producers as well as consumers (or prosumers). A battery energy storage device thus becomes an integral part of the changing relationship between the utilities and it's customers. Battery energy storage system, PQpluS helps the electricity consumers by actively managing the timing and profile of their energy usage. It reduces energy costs and makes the system more resilient while improving the overall efficiency, reliability and availability of the power system.
PQpluS is available in a wide range of power and energy ratings, making it the right choice for end users, system integrators and aggregators, as well as users with the right control system for utility scale applications. It can also be used where multiple energy sources such as wind, solar, diesel or other generators operate in parallel and where the integrator’s high level system controller coordinates the overall operation. In addition to functions like peak shaving and power quality, PQpluS can be managed by third party controller to perform site energy management, integration of renewables and grid services.
Applications
For commercial and industrial customers:
-
Peak load shaving
-
Integration of EV charging
-
Maximization of self-consumption for PV solar
-
Power quality
System integrators can integrate PQpluS with their controller and provide utility scale solution for applications such as:
-
Site energy management
-
Demand response
-
Grid services
-
Frequency regulation
-
Capacity firming and ramp rate control for renewable energy sources
Technology parameters
Installation is super simple! The system comes pre installed with all the components, and you only need to connect the power and communication cables. Ordinary electricians can handle it in 1-2 days without any hassle. Maintenance is more worry free, and the mobile app can check the running status and alerts at any time. The system will optimize its operation by itself. We also provide full lifecycle management services, tracking the entire process from installation to maintenance, truly allowing you to use electricity without worry and with peace of mind. "
Don't worry, our PQpluS efficiency is as high as 92%+! Adopting intelligent BMS and high-performance lithium battery, supporting 5000+cycles, the capacity can still maintain over 80% after deep discharge of 80%. Combined with an intelligent temperature control system, it can operate stably even in high temperature environments. Simply put, it means using it for longer periods of time, saving more energy, and not having to constantly worry about battery aging and replacement. In the long run, it is more cost-effective. "
Great! PQpluS supports mainstream communication protocols such as Modbus and CAN, and can be seamlessly integrated with your existing EMS system without the need for major reconfiguration. The system can automatically cooperate with your control logic to achieve peak valley shaving and maximize photovoltaic self use, directly upgrading your existing system functions without having to spend a lot of money on new equipment. Simply put, it's the old system with new features, which is worry free and cost-effective! "
Related Products
-
LFP All-in-One Energy Storage Battery with Inverter & Controller
-
5.12kWh low-voltage wall-mounted lithium battery
-
5-20 kWh AC/ DC / Hybrid-Coupling residential energy storage system
-
Class-A 5.12KWh Low Voltage Energy Storage Battery for Energy Storage System
-
4.8kWh 5.12kWh Commercial Use Stacked energy storage battery
-
9.6KWh/10.24KWh Household Column energy storage battery
-
2.4–10.24 KWh Household Wall - Mounted Energy Storage Battery
Related Knowledges
-
Main Transformer Accidents and Light Gas Operation Issues1. Accident Record (March 19, 2019)At 16:13 on March 19, 2019, the monitoring background reported a light gas action of No. 3 main transformer. In accordance with the Code for Operation of Power Transformers (DL/T572-2010), operation and maintenance (O&M) personnel inspected the on-site condition of No. 3 main transformer.On-site confirmation: The WBH non-electrical protection panel of No. 3 main transformer reported a Phase B light gas action of the transformer body, and the reset was ineff02/05/2026 -
Faults and Handling of Single-phase Grounding in 10kV Distribution LinesCharacteristics and Detection Devices for Single-Phase Ground Faults1. Characteristics of Single-Phase Ground FaultsCentral Alarm Signals:The warning bell rings, and the indicator lamp labeled “Ground Fault on [X] kV Bus Section [Y]” illuminates. In systems with a Petersen coil (arc suppression coil) grounding the neutral point, the “Petersen Coil Operated” indicator also lights up.Insulation Monitoring Voltmeter Indications:The voltage of the faulted phase decreases (in01/30/2026 -
Neutral point grounding operation mode for 110kV～220kV power grid transformersThe arrangement of neutral point grounding operation modes for 110kV～220kV power grid transformers shall meet the insulation withstand requirements of transformer neutral points, and shall also strive to keep the zero-sequence impedance of substations basically unchanged, while ensuring that the zero-sequence comprehensive impedance at any short-circuit point in the system does not exceed three times the positive-sequence comprehensive impedance.For 220kV and 110kV transformers in new constructi01/29/2026 -
Why Do Substations Use Stones, Gravel, Pebbles, and Crushed Rock?Why Do Substations Use Stones, Gravel, Pebbles, and Crushed Rock?In substations, equipment such as power and distribution transformers, transmission lines, voltage transformers, current transformers, and disconnect switches all require grounding. Beyond grounding, we will now explore in depth why gravel and crushed stone are commonly used in substations. Though they appear ordinary, these stones play a critical safety and functional role.In substation grounding design—especially when multiple gr01/29/2026 -
Why Must a Transformer Core Be Grounded at Only One Point? Isn't Multi-Point Grounding More Reliable?Why Does the Transformer Core Need to Be Grounded?During operation, the transformer core, along with the metal structures, parts, and components that fix the core and windings, are all situated in a strong electric field. Under the influence of this electric field, they acquire a relatively high potential with respect to ground. If the core is not grounded, a potential difference will exist between the core and the grounded clamping structures and tank, which may lead to intermittent discharge.I01/29/2026 -
Understanding Transformer Neutral GroundingI. What is a Neutral Point?In transformers and generators, the neutral point is a specific point in the winding where the absolute voltage between this point and each external terminal is equal. In the diagram below, pointOrepresents the neutral point.II. Why Does the Neutral Point Need Grounding?The electrical connection method between the neutral point and earth in a three-phase AC power system is called theneutral grounding method. This grounding method directly affects:The safety, reliabilit01/29/2026
Related Solutions
-
Distribution automation systems solutionsWhat are the difficulties in overhead line operation and maintenance?Difficulty one:Overhead lines of distribution network have wide coverage,complicatedterrain,many radiation branches and distributed power supply,resultingin "many line faults and difficulty in fault troubleshooting".Difficulty Two:Manual troubleshooting is time-consuming and laborious.Meanwhile,therunning current,voltage and switching state of the line cannot be graspedin real time,because of the lack of intelligent technical m04/22/2025 -
RW8000 DMS Distribution Management System SolutionsOverviewNowadays, the development trend of power grid is intellectualization. As an important part of power grid, the power distribution system is very close to the customers and it has to run properly. The distribution management system (DMS）played an important role in it.Introduction:RW8000 power distribution management system (DMS) is designed for the smart grids. It is based on real-time application, centered on distribution network operation and management, focusing on the business process09/07/2023 -
High-Precision Electrical Parameter Monitoring System Solution1.IntroductionWith the increasingly stringent requirements for power supply quality in high-end facilities such as precision manufacturing, medical diagnosis, and data centers, traditional power monitoring systems, due to their low sampling accuracy and weak data analysis capabilities, can no longer meet the demand for deep insight and precise management of power quality. In response, we are introducing a new generation High-Precision Electrical Parameter Monitoring System. With millisecond-l09/28/2025
