Outdoor portable power station
Key attributes
| Brand | RW Energy |
| Model NO. | Outdoor portable power station |
| Rated Output Rating | 5kW |
| Energy storage capacity | 4.8kWh |
| Series | OP |
Product descriptions from the supplier
Peculiarity：
-
Light weight, high capacity, stable power.
-
Rich interface, compatible with USB-A,USB-C,DC interface, cigarette lighter and other mainstream DC interface, and can provide 20~100W stable output.
-
Complete protection functions, high safety performance.
-
Support battery pack voltage and capacity customization to meet different use environments.
-
Mature technology, long cycle life.
-
Modular design, high power density, easy maintenance
Technical parameter：
NOTE:
Optional AC socket
Optional AC socket output standard：
220V 50HZ / 230V 50HZ / 230V 60HZ/
110V 60HZ / 110V50HZ
The output electric energy standard is applicable to most countries or regions such as Chinese mainland, Hong Kong, Macao, North Korea,Japan，Australia, South Asia, the Middle East, Europe, Africa, South America, etc., and customers in non-above regions can customize according to the customer's local electric energy standard.
Overview of working principle.
The main working principle of a portable power station is to store electrical energy through energy storage units (such as battery packs) and convert the stored electrical energy into alternating current (AC) when needed for use by various electrical appliances. The specific working process is as follows:
-
Energy storage:Portable power stations store electrical energy through battery packs. These battery packs usually use lithium-ion battery technology because they have high energy density and a long service life.
-
Energy management:The battery management system (BMS) monitors the state of the battery, including parameters such as voltage, current, and temperature, and optimizes the battery's charging and discharging process through algorithms to ensure the safe and efficient operation of the battery.The energy management system (EMS) is responsible for the operation strategy of the entire system, including when to charge, when to discharge, and how to optimize energy distribution.
-
Energy conversion:The inverter converts the direct current (DC) in the battery pack into alternating current (AC) for use by household appliances, electronic devices, etc.The inverter is also responsible for ensuring the quality of the output electrical energy, such as voltage stability and accurate frequency.
-
Energy release:When electricity is needed, the stored direct current is converted into alternating current through the inverter and output to terminal devices for use through sockets or other interfaces.
Related Products
-
2.4KWh-10.24KWh Rack type energy storage battery(Industrial&Commercial energy storage)
-
9.6kWh-143kWh Combined type-high voltage energy storage battery
-
Class-A 5.12KWh Low Voltage Energy Storage Battery for Energy Storage System
-
High-Performance Industrial Mobile Power Station
-
4.8kWh 5.12kWh Commercial Use Stacked energy storage battery
-
3.44MWh Battery utility-scale energy storage battery System
-
215KWh Industrial and commercial energy storage
Related Knowledges
-
Impact of DC Bias in Transformers at Renewable Energy Stations Near UHVDC Grounding ElectrodesImpact of DC Bias in Transformers at Renewable Energy Stations Near UHVDC Grounding ElectrodesWhen the grounding electrode of an Ultra-High-Voltage Direct Current (UHVDC) transmission system is located close to a renewable energy power station, the return current flowing through the earth can cause a rise in ground potential around the electrode area. This ground potential rise leads to a shift in the neutral-point potential of nearby power transformers, inducing DC bias (or DC offset) in their01/15/2026 -
HECI GCB for Generators – Fast SF6 Circuit Breaker1.Definition and Function1.1 Role of the Generator Circuit BreakerThe Generator Circuit Breaker (GCB) is a controllable disconnect point located between the generator and the step-up transformer, serving as an interface between the generator and the power grid. Its primary functions include isolating generator-side faults and enabling operational control during generator synchronization and grid connection. The operating principle of a GCB is not significantly different from that of a standard c01/06/2026 -
Distribution Equipment Transformer Testing, Inspection, and Maintenance1.Transformer Maintenance and Inspection Open the low-voltage (LV) circuit breaker of the transformer under maintenance, remove the control power fuse, and hang a “Do Not Close” warning sign on the switch handle. Open the high-voltage (HV) circuit breaker of the transformer under maintenance, close the grounding switch, fully discharge the transformer, lock the HV switchgear, and hang a “Do Not Close” warning sign on the switch handle. For dry-type transformer maintenance: first clean the porcel12/25/2025 -
How to Test Insulation Resistance of Distribution TransformersIn practical work, insulation resistance of distribution transformers is generally measured twice: the insulation resistance between thehigh-voltage (HV) windingand thelow-voltage (LV) winding plus the transformer tank, and the insulation resistance between theLV windingand theHV winding plus the transformer tank.If both measurements yield acceptable values, it indicates that the insulation among the HV winding, LV winding, and transformer tank is qualified. If either measurement fails, pairwise12/25/2025 -
Design Principles for Pole-Mounted Distribution TransformersDesign Principles for Pole-Mounted Distribution Transformers(1) Location and Layout PrinciplesPole-mounted transformer platforms should be located near the load center or close to critical loads, following the principle of “small capacity, multiple locations” to facilitate equipment replacement and maintenance. For residential power supply, three-phase transformers may be installed nearby based on current demand and future growth projections.(2) Capacity Selection for Three-Phase Pole-Mounted Tr12/25/2025 -
Transformer Noise Control Solutions for Different Installations1.Noise Mitigation for Ground-Level Independent Transformer RoomsMitigation Strategy:First, conduct a power-off inspection and maintenance of the transformer, including replacing aged insulating oil, checking and tightening all fasteners, and cleaning dust from the unit.Second, reinforce the transformer foundation or install vibration isolation devices—such as rubber pads or spring isolators—selected based on the severity of vibration.Finally, strengthen sound insulation at weak points of the ro12/25/2025
Related Solutions
-
Distribution automation systems solutionsWhat are the difficulties in overhead line operation and maintenance?Difficulty one:Overhead lines of distribution network have wide coverage,complicatedterrain,many radiation branches and distributed power supply,resultingin "many line faults and difficulty in fault troubleshooting".Difficulty Two:Manual troubleshooting is time-consuming and laborious.Meanwhile,therunning current,voltage and switching state of the line cannot be graspedin real time,because of the lack of intelligent technical m04/22/2025 -
RW8000 DMS Distribution Management System SolutionsOverviewNowadays, the development trend of power grid is intellectualization. As an important part of power grid, the power distribution system is very close to the customers and it has to run properly. The distribution management system (DMS）played an important role in it.Introduction:RW8000 power distribution management system (DMS) is designed for the smart grids. It is based on real-time application, centered on distribution network operation and management, focusing on the business process09/07/2023 -
High-Precision Electrical Parameter Monitoring System Solution1.IntroductionWith the increasingly stringent requirements for power supply quality in high-end facilities such as precision manufacturing, medical diagnosis, and data centers, traditional power monitoring systems, due to their low sampling accuracy and weak data analysis capabilities, can no longer meet the demand for deep insight and precise management of power quality. In response, we are introducing a new generation High-Precision Electrical Parameter Monitoring System. With millisecond-l09/28/2025
