10-30kW Three-phase OFF-Grid Wind&Solar Hybrid Controller
Key attributes
| Brand | Wone Store |
| Model NO. | 10-30kW Three-phase OFF-Grid Wind&Solar Hybrid Controller |
| Rated Output Rating | 20kW |
| Input Voltage | DC240V |
| Series | WIT |
Product descriptions from the supplier
Features
Can be applied in wind, solar, wind&solar hybrid power generation system
Simple structure, complete function
Lowno-load loss byusing industrial frequency transformer
R5232/R5485/GPRS optional (Those with GPR5 can also be monitored through App.
CE certification
Applications
Application in wind, Solar, Wind&Solar hybrid power generation station.
Application in household wind&solar hybrid power generation system.
Power supply for those unmanned regions like the coastal islands, remote mountainous regions and border posts.
Technology Parameters
Model |
WIT100-120 |
WIT100-240 |
WIT200-240 |
WIT300-240 |
DC Input Parameters |
||||
Rated battery voltage |
120VDC |
240VDC |
240VDC |
240VDC |
Input overvoltage point |
170VDC |
340VDC |
340VDC |
340VDC |
Input overvoltage recovery point |
165VDC |
330VDC |
330VDC |
330VDC |
Input undervoltage point |
108VDC |
216VDC |
216VDC |
216VDC |
Input undervoltage recovery point |
120VDC |
240VDC |
240VDC |
240VDC |
AC Output Parameters |
||||
Output phase number |
Three-Phase |
|||
Rated output power |
10kW |
10kW |
20kW |
30kW |
Rated output voltage |
380VAC |
|||
Rated output frequency |
50/60±0.5Hz |
|||
THDi |
<5% |
|||
Efficiency |
||||
Max. conversion efficiency |
≥90% |
|||
Protection Functions |
||||
DC input overvoltage/undervoltage protection |
YES |
|||
DC reversed connection protection |
YES |
|||
AC output overload protection |
YES |
|||
AC short circuit protection |
YES |
|||
Surge protection |
YES |
|||
Over-temperature protection |
YES |
|||
General Parameters |
||||
Display mode |
LCD |
|||
Isolation mode |
Industrial frequency isolation |
|||
No-load current |
≤2A |
≤1.25A |
≤2A |
≤2.5A |
Ambient temperature |
-20℃ ~ +40℃ |
|||
Humidity |
5%~95%, No condensing |
|||
Noise |
<60dB |
|||
Cooling mode |
Forced air cooling |
|||
Cover protection class |
IP20 |
|||
Product dimension (W*H*D) |
500x710x500mm |
600x1180x600mm |
||
Product net weight |
100kg |
200kg |
280kg |
|
Note: Part of parameters can be adjusted according to customer's specific demand. |
||||
Online store
On-time delivery rate
Response time
100.0%
≤4h
Company overview
Workplace: 1000m²
Total staff:
Highest Annual Export(usD): 300000000
Services
Business Type: Sales
Main Categories: Wire cable/High Voltage Electrical Apparatus/Low Voltage Electrical Apparatus/Instrument meters/New energy/Tester/Integrated Electrical Equipment/Production equipment/Generator/Electrical fittings/Instrument Transformer/Equipment Parts
Whole life care manager
Whole-life care management services for equipment procurement, use, maintenance, and after-sales, ensuring safe operation of electrical equipment, continuous control, and worry-free electricity consumption.
The equipment supplier has passed platform qualification certification and technical evaluation, ensuring compliance, professionalism, and reliability from the source.
Related Products
-
100-600W high-performance wind-solar complementary controller
-
10-30kW Single-phase OFF-Grid Wind&Solar Hybrid Controller
-
1-30KW off-gird wind power controller
-
50KW ON/OFF Grid Wind Power controller
-
30KW ON/OFF Grid Wind Power controller
-
20KW ON/OFF Grid Wind Power controller
-
10KW ON/OFF Grid Wind Power controller
Related Knowledges
-
HECI GCB for Generators – Fast SF6 Circuit Breaker1.Definition and Function1.1 Role of the Generator Circuit BreakerThe Generator Circuit Breaker (GCB) is a controllable disconnect point located between the generator and the step-up transformer, serving as an interface between the generator and the power grid. Its primary functions include isolating generator-side faults and enabling operational control during generator synchronization and grid connection. The operating principle of a GCB is not significantly different from that of a standard c01/06/2026 -
Distribution Equipment Transformer Testing, Inspection, and Maintenance1.Transformer Maintenance and Inspection Open the low-voltage (LV) circuit breaker of the transformer under maintenance, remove the control power fuse, and hang a “Do Not Close” warning sign on the switch handle. Open the high-voltage (HV) circuit breaker of the transformer under maintenance, close the grounding switch, fully discharge the transformer, lock the HV switchgear, and hang a “Do Not Close” warning sign on the switch handle. For dry-type transformer maintenance: first clean the porcel12/25/2025 -
How to Test Insulation Resistance of Distribution TransformersIn practical work, insulation resistance of distribution transformers is generally measured twice: the insulation resistance between thehigh-voltage (HV) windingand thelow-voltage (LV) winding plus the transformer tank, and the insulation resistance between theLV windingand theHV winding plus the transformer tank.If both measurements yield acceptable values, it indicates that the insulation among the HV winding, LV winding, and transformer tank is qualified. If either measurement fails, pairwise12/25/2025 -
Design Principles for Pole-Mounted Distribution TransformersDesign Principles for Pole-Mounted Distribution Transformers(1) Location and Layout PrinciplesPole-mounted transformer platforms should be located near the load center or close to critical loads, following the principle of “small capacity, multiple locations” to facilitate equipment replacement and maintenance. For residential power supply, three-phase transformers may be installed nearby based on current demand and future growth projections.(2) Capacity Selection for Three-Phase Pole-Mounted Tr12/25/2025 -
Transformer Noise Control Solutions for Different Installations1.Noise Mitigation for Ground-Level Independent Transformer RoomsMitigation Strategy:First, conduct a power-off inspection and maintenance of the transformer, including replacing aged insulating oil, checking and tightening all fasteners, and cleaning dust from the unit.Second, reinforce the transformer foundation or install vibration isolation devices—such as rubber pads or spring isolators—selected based on the severity of vibration.Finally, strengthen sound insulation at weak points of the ro12/25/2025 -
Risk Identification and Control Measures for Distribution Transformer Replacement Work1.Electric Shock Risk Prevention and ControlAccording to typical design standards for distribution network upgrades, the distance between the transformer’s drop-out fuse and the high-voltage terminal is 1.5 meters. If a crane is used for replacement, it is often impossible to maintain the required minimum safety clearance of 2 meters between the crane boom, lifting gear, slings, wire ropes, and the 10 kV live parts, posing a severe risk of electric shock.Control Measures:Measure 1:De-energize th12/25/2025
Related Solutions
-
Dedicated Vacuum Contactor Solution for Port Shore Power SystemsI. Background and ChallengesShore power systems have become core technical equipment for ports to reduce carbon emissions and noise pollution. However, these systems face two major challenges in the harsh operational environment of ports:Severe Environmental Corrosion: High humidity and salt spray in port areas cause serious corrosion to metal components and enclosures of electrical equipment, significantly impacting electrical lifespan and operational reliability.High Switching Requirements:09/13/2025 -
ABB Vacuum Contactor KC2 Power Supply System Technical Transformation PlanIssue OverviewThe 10kV air compressor starting system of a company utilizes the ABB vacuum contactor KC2 as the control component for the operating circuit. The dedicated wide-voltage power supply module paired with this contactor presents the following issues:Frequent failures: The power supply module fails to properly transition the voltage from 300V to 12V, resulting in fuse blowouts.Poor heat dissipation: Enclosed installation of the module leads to insufficient heat dissipation, acceler09/13/2025 -
Solution for Medium-Voltage Motor Control and Protection Using Vacuum Contactor-Fuse (VCF) in a Coal Conveying System1.Project BackgroundA coal conveying system comprises 15 belt conveyors driven by medium-voltage motors. The system operates under complex conditions, with motors often subjected to heavy loads and frequent starts. To address these challenges and achieve effective control and reliable protection during motor startup, the project comprehensively adopts Vacuum Contactor-Fuse (VCF) combination devices for the 6kV medium-voltage motor power distribution. This solution details the technical features,09/13/2025
Haven't found the right supplier yet? Let matching verified suppliers find you.
Get Quotation Now
Send inquiry
Download
Get the IEE Business Application
Use the IEE-Business app to find equipment, obtain solutions, connect with experts, and participate in industry collaboration anytime, anywhere—fully supporting the development of your power projects and business.
