1-30KW off-gird wind power controller
Key attributes
| Brand | Wone Store |
| Model NO. | 1-30KW off-gird wind power controller |
| Input Voltage | DC240V |
| Power | 5KW |
| Series | WW |
Product descriptions from the supplier
Features
Can be applied to grid-tied system, off-grid system and grid-tied energy storage system.
R5232/RS485/RJ45/GPRS/Bluetooth/Zigbee optional.
MPPT power curve settable
protection function Standard
MODBUS protocol optional
Applications
independent wind power plant&independent household wind power generation system
Power supply for those unmanned regions like mobile communication station, high way, thecoastal islands,remote mountainous regions and border posts.
Regional research projects, government demonstration projects, landscape lighting projects forthose places with insufficient power or power shortages.
Technology Parameters
Model |
WW10 - 48 - 48 |
WW20 - 48 - 48 |
WW20 - 48 - 240 |
WW30 - 48 - 240 |
WW30 - 120 - 120 |
WW30 - 240 - 240 |
WW50 - 240 - 240 |
Type |
Boost |
Boost |
Buck |
Buck |
Boost |
Buck |
|
Rated input power |
1kW |
2kW |
3kW |
5kW |
|||
Rated input voltage |
56VDC |
56VDC |
280VDC |
280VDC |
280VDC |
280VDC |
280VDC |
Input voltage range |
12 ~ 64Vdc |
12 ~ 64VDC |
60 ~ 320VDC |
60~320VDC |
30~160VDC |
60~320VDC |
60~320VDC |
Rated input current |
21Adc |
42A |
9A |
13A |
25A |
13A |
9A |
Brake by hand |
Keep press the button for 5s to unload completely, and then recover by hand. |
||||||
Switch “ON” the brake switch |
|||||||
Brake by over current |
25A (factory default, 0~25A settable). |
50A (factory default, 0~50A settable) |
10A (factory default, 0~10A settable |
15A (factory default, 0~15A settable) |
30A (factory default, 0~30A settable) |
15A (factory default, 0~15A settable) |
10A (factory default, 0~10A settable) |
Brake by overvoltage |
Refer to "output overvoltage" control |
320VDC (factory default,220V~320VDC settable)PWM unload step by step once reached the set unload voltage, and it will unload completely if the voltage rise 20V more. |
Refer to "output overvoltage" control |
320VDC (factory default,220V~320VDC settable)PWM unload step by step once reached the set unload voltage, and it will unload completely if the voltage rise 20V more. |
|||
Brake by over wind speed (optional) |
18m/s (0~30m/s settable). Unload completely when reached the set wind speed, and recover automatically after 10mins (and the speed should be less than 15m/s.) |
||||||
Brake by over rotational Speed (optional) |
500r/min (factory default, 0~1000r/min settable). Unload completely when reached the set rotational speed, and recover automatically after working 10mins. |
||||||
Charge Parameters (optional) |
|||||||
Rated battery voltage |
48VDC |
48VDC |
48VDC |
48VDC |
120VDC |
240VDC |
240VDC |
Temperature compensation function (optional) |
-3mV/°C/2V |
-3mV/°C/2V |
-3mV/°C/2V |
-3mV/°C/2V |
-3mV/°C/2V |
-3mV/°C/2V |
-3mV/°C/2V |
Rated output voltage |
48VDC |
48VDC |
48VDC |
48VDC |
120VDC |
240VDC |
48VDC |
Start unload voltage |
56VDC (factory default, 44V~64VDC settable) |
56VDC (factory default, 44V~64VDC settable) |
56VDC (factory default, 44V~64VDC settable) |
56VDC (factory default, 44V~64VDC settable) |
140VDC (factory default, 110V - 160VDC settable) |
280VDC (factory default, 220V - 320VDC settable) |
56V (factory default, 44V~64VDC settable) |
Complete unloaded voltage |
58VDC (factory default, add 2V to the start unload voltage) |
58VDC (factory default, add 2V to the start unload voltage) |
58VDC (factory default, add 2V to the start unload voltage) |
58VDC (factory default, add 2V to the start unload voltage) |
145VDC (factory defaulted add 5Vto the start unload |
290VDC (factory default, add 10V to the start unload voltage) |
58VDC (factory default, add 2V to the start unload voltage) |
Max. Output current |
21A |
21A |
21A |
42A |
25A |
13A |
105A |
General Parameters |
|||||||
Rectifier mode |
Uncontrolled rectifier |
||||||
Display mode |
LCD |
||||||
Display information |
DC output voltage, wind turbine voltage/current/power. |
||||||
For those with charge control function, Battery voltage is showed as well. |
|||||||
Monitoring mode (optional) |
RS232/RS485/RJ45/GPRS/ Bluetooth /Zigbee |
||||||
Monitoring Contents |
Real-time display: DC output voltage, wind turbine voltage/current/power. |
||||||
For those with charge control function, Battery voltage is showed as well. |
|||||||
Parameter setting: Output overvoltage point, wind turbine over current point, wind turbine start voltage, and wind turbine brake settings. |
|||||||
Lightning protection |
YES |
||||||
Conversion efficiency |
≥92% |
||||||
Static loss |
< 2W |
< 5W |
|||||
Ambient temperature |
-20℃ ~ +40℃ |
-20℃ ~ +40℃ |
|||||
Humidity |
5~95%, No condensing |
0~90%, No condensing |
|||||
Noise |
≤65dB |
||||||
Cooling mode |
Forced air cooling |
||||||
Installation mode |
Wall - mounted |
||||||
Cover protection class |
IP42 |
||||||
Product dimension (WHD) |
300x375x145mm |
300x375x145mm |
300x375x145mm |
360x430x191mm |
300x375x145mm |
300x375x145mm |
300x375x145mm |
Product net weight |
10kg |
10kg |
10kg |
13kg |
10kg |
10kg |
10kg |
Dump load dimension (WHD) |
360x80x120mm |
300x400x210mm |
300x400x210mm |
400x390x210mm |
400x390x210mm |
400x390x210mm |
400x390x210mm |
Dump load net weight |
2.8kg |
9kg |
9kg |
12kg |
12kg |
12kg |
9kg |
Note: Part of parameters can be adjusted according to customer's specific demand. |
|||||||
Related Products
-
100-600W high-performance wind-solar complementary controller
-
10-30kW Single-phase OFF-Grid Wind&Solar Hybrid Controller
-
10-30kW Three-phase OFF-Grid Wind&Solar Hybrid Controller
-
50KW ON/OFF Grid Wind Power controller
-
30KW ON/OFF Grid Wind Power controller
-
20KW ON/OFF Grid Wind Power controller
-
10KW ON/OFF Grid Wind Power controller
Related Knowledges
-
What Are the Factors Influencing the Impact of Lightning on 10kV Distribution Lines?1. Induced Lightning OvervoltageInduced lightning overvoltage refers to the transient overvoltage generated on overhead distribution lines due to nearby lightning discharges, even when the line is not directly struck. When a lightning flash occurs in the vicinity, it induces a large amount of charge on the conductors—opposite in polarity to the charge in the thundercloud.Statistical data shows that lightning-related faults caused by induced overvoltages account for approximately 90% of total fauEcho11/03/2025 -
THD Measurement Error Standards for Power SystemsError Tolerance of Total Harmonic Distortion (THD): A Comprehensive Analysis Based on Application Scenarios, Equipment Accuracy, and Industry StandardsThe acceptable error range for Total Harmonic Distortion (THD) must be evaluated based on specific application contexts, measurement equipment accuracy, and applicable industry standards. Below is a detailed analysis of key performance indicators in power systems, industrial equipment, and general measurement applications.1. Harmonic Error StandarEdwiin11/03/2025 -
Why is it difficult to increase the voltage level?The solid-state transformer (SST), also known as a power electronic transformer (PET), uses voltage level as a key indicator of its technological maturity and application scenarios. Currently, SSTs have reached voltage levels of 10 kV and 35 kV on the medium-voltage distribution side, while on the high-voltage transmission side, they remain in the stage of laboratory research and prototype validation. The table below clearly illustrates the current status of voltage levels across different appliEcho11/03/2025 -
Compact Air-Insulated RMUs for Retrofit & New SubstationsAir-insulated ring main units (RMUs) are defined in contrast to compact gas-insulated RMUs. Early air-insulated RMUs used vacuum or puffer-type load switches from VEI, as well as gas-generating load switches. Later, with the widespread adoption of the SM6 series, it became the mainstream solution for air-insulated RMUs. Similar to other air-insulated RMUs, the key difference lies in replacing the load switch with an SF6-encapsulated type—where the three-position switch for load and grounding isEcho11/03/2025 -
Standards and Calculation of LTAC Test for Power Transformers1 IntroductionAccording to the provisions of the national standard GB/T 1094.3-2017, the primary purpose of the line terminal AC withstand voltage test (LTAC) for power transformers is to evaluate the AC dielectric strength from the high-voltage winding terminals to ground. It does not serve to assess inter-turn insulation or phase-to-phase insulation.Compared with other insulation tests (such as full lightning impulse LI or switching impulse SI), the LTAC test imposes a relatively more stringenOliver Watts11/03/2025 -
Climate-Neutral 24kV Switchgear for Sustainable Grids | Nu1Expected service life of 30–40 years, front access, compact design equivalent to SF6-GIS, no SF6 gas handling – climate-friendly, 100% dry air insulation. The Nu1 switchgear is metal-enclosed, gas-insulated, featuring a withdrawable circuit breaker design, and has been type-tested according to relevant standards, approved by the internationally recognized STL laboratory.Compliance Standards Switchgear: IEC 62271-1 High-voltage switchgear and controlgear – Part 1: Common specifications for alternEdwiin11/03/2025
Related Solutions
-
Dedicated Vacuum Contactor Solution for Port Shore Power SystemsI. Background and ChallengesShore power systems have become core technical equipment for ports to reduce carbon emissions and noise pollution. However, these systems face two major challenges in the harsh operational environment of ports:Severe Environmental Corrosion: High humidity and salt spray in port areas cause serious corrosion to metal components and enclosures of electrical equipment, significantly impacting electrical lifespan and operational reliability.High Switching Requirements:Wone Store09/13/2025 -
ABB Vacuum Contactor KC2 Power Supply System Technical Transformation PlanIssue OverviewThe 10kV air compressor starting system of a company utilizes the ABB vacuum contactor KC2 as the control component for the operating circuit. The dedicated wide-voltage power supply module paired with this contactor presents the following issues:Frequent failures: The power supply module fails to properly transition the voltage from 300V to 12V, resulting in fuse blowouts.Poor heat dissipation: Enclosed installation of the module leads to insufficient heat dissipation, accelerWone Store09/13/2025 -
Solution for Medium-Voltage Motor Control and Protection Using Vacuum Contactor-Fuse (VCF) in a Coal Conveying System1.Project BackgroundA coal conveying system comprises 15 belt conveyors driven by medium-voltage motors. The system operates under complex conditions, with motors often subjected to heavy loads and frequent starts. To address these challenges and achieve effective control and reliable protection during motor startup, the project comprehensively adopts Vacuum Contactor-Fuse (VCF) combination devices for the 6kV medium-voltage motor power distribution. This solution details the technical features,Wone Store09/13/2025
