• Single Phase Prepayment Smart Energy Meters with Wifi Communication
  • Single Phase Prepayment Smart Energy Meters with Wifi Communication
  • Single Phase Prepayment Smart Energy Meters with Wifi Communication
Single Phase Prepayment Smart Energy Meters with Wifi Communication
$60.00
Model
SPM-230/5(30)-WIFI
SPM-230/5(32)-WIFI
SPM-230/5(40)-WIFI
SPM-230/5(45)-WIFI
SPM-230/5(50)-WIFI
SPM-230/5(80)-WIFI
SPM-230/5(100)-WIFI
Basic info
Brand Wone
Model NO. Single Phase Prepayment Smart Energy Meters with Wifi Communication
Rated voltage 230V
Rated normal current 5(40)A
Rated frequency 50(Hz)
Methods of Communication Bluetooth
Series D124056
Product Detail

Description

This is a single phase two wire WiFi prepayment keypad meter, the prepayment energy meter supports WiFi communication, built-in magnetic relay, can realize the functions of pay-as-you-go, remote meter reading, remote recharge, remote balance clearing/total power, overpower tripping, automatic tripping when the balance is exhausted, etc

Features

  • bypass power detection, record events and LED alarm.

  • open terminal cover detection, LED alarm and record the event.

  • record external magnetic field event.

  • record over voltage and low voltage event.

  • self-diagnostic: EEPROM check, battery alarm.

  • Total active energy power, voltage effective value, current effective value, average active energy on second, current date。

  • With G3 PLC communication.

  • Over voltage, low voltage, bypass, current reverse, power off, open terminal cover.

  • Single phase active energy measurement, keep records of power, average active energy on second, voltage effective value, current effective value, demand.

Specifications

Main
Range D124056
Product or Componet Type Energy meter
Country of origin China
Complementary
Phase Single Phase
Type of measurement

----

Metering type

Measurement

Device Application

Energy Charge

Accuracy class Active power 1.0 
Rated Current 5(60)A

Rated Voltage

230V

Network Frequency 50-60Hz
Technology Type Electronic
Display Type LCD display(LCD 6+2 = 999999.99kWh)
Impulse Constant

1000imp/kWh(LED)   1000imp/kvarh

Maximum value measured 99999.99kWh
Tariff input ---
Communication port protocol Wifi
Communication port support Bluetooth
Local signalling

------

Number of inputs -------
Number of Outputs --------------
Output voltage 230V
Mounting Mode Clip-on
Mounting Support DIN rail
Connections - terminals

-------

Standards

DLMSMID/CE



Environment
IP degree of protection

IP54

Relative humidity ≤75%
Ambient air temperature for operation -20…55 °C
Ambient Air Temperature for Storage --20…70 °C
Operating altitude ---
Dimensions 171.5*124.9*54.5mm
Packing Units
Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 54.5mm
Package 1 Width 124.9mm
Package 1 Length 171.5mm
Package 1 Weight 1.000kg



Connection Diagram

image.png



Dimensions


image.png








Know your supplier
Wone
Main Categories
High voltage/Low voltage/Wire cable/Instrument meters/New energy/Tester/Production equipment/Generator/Electrical fittings/Integrated Electrical Equipment
Business Type
Design/Manufacture/Sales
Highest Annual Export (USD)
$50,000,000
Professional Experience
1 years
Workplace
65666m²m²
占位
占位
Related Products
Related Knowledges
What is reactive power measurement?
What is reactive power measurement?
The power which exists in the circuit when the voltage and current are out of phase to each other, such type of power is known as the reactive power. The formula measures the reactive power in the circuitReactive Power Measurement & VarmetersReactive power measurement is critical as it indicates circuit power loss: low reactive power worsens load power factor, increasing system losses. Varmeters (volt-ampere reactive meters) measure reactive power and are categorized by circuit phases:Single
Edwiin
07/17/2025
How to Design and Install a Solar PV System?
How to Design and Install a Solar PV System?
Design and Installation of Solar PV SystemsModern society relies on energy for daily needs like industry, heating, transport, and agriculture, mostly met by non-renewable sources (coal, oil, gas). However, these cause environmental harm, are unevenly distributed, and face price volatility due to limited reserves—driving demand for renewable energy.Solar energy, abundant and capable of meeting global needs, stands out. Standalone PV systems (Fig 1) offer energy independence from utilities.
Edwiin
07/17/2025
What are the common faults that occur when low-voltage current transformers are combined with other power equipment?
What are the common faults that occur when low-voltage current transformers are combined with other power equipment?
Low-voltage current transformers, as indispensable measurement and protection devices in power systems, often encounter various faults when used in combination with other power equipment due to environmental factors, equipment linkage issues, and improper installation and maintenance. These faults not only affect the normal operation of power equipment but may also endanger personal safety. Therefore, it is necessary to gain an in-depth understanding of fault types, judgment methods, and prevent
Felix Spark
07/17/2025
What are the monitoring methods and future development trends of low-voltage voltage transformers?
What are the monitoring methods and future development trends of low-voltage voltage transformers?
With the continuous advancement of smart grid technology, intelligent monitoring systems are playing an increasingly important role in preventing and addressing faults in voltage transformers. These modern intelligent monitoring systems can collect key parameters from voltage transformers in real time—such as partial discharge levels, temperature, and oil quality—and use data analysis algorithms to assess the health status of the equipment, enabling early fault warnings and precise l
Echo
07/16/2025
What are the common faults of low-voltage voltage transformers?
What are the common faults of low-voltage voltage transformers?
1. Open - Circuit Fault on the Secondary SideOpen - circuit in the secondary side is a typical fault of low - voltage voltage transformers, showing abnormal voltmeter readings (zero/fluctuation), faulty power meters, buzzing noises, and core overheating. When open - circuited, the secondary voltage spikes (no secondary current to balance the primary EMF), causing core saturation, flux distortion, and potential overheating/damage.Causes include loose terminals, poor contact, or human error. In lo
Oliver Watts
07/16/2025
A Quick Verification Method for Low-Voltage Current Transformers
A Quick Verification Method for Low-Voltage Current Transformers
1. Selection of Low - Voltage Current Transformer ConfigurationThere are many factors leading to wrong selection of low - voltage current transformers in civil construction projects. For example, common factors include design problems: the calculated coefficient designed for the load of electrical equipment is relatively large, or the transformation ratio of the current transformer is selected incorrectly. Such a series of reasons will affect the use of electrical equipment. Therefore, in the co
James
07/16/2025
×
Inquiry
Download
IEE-Business is dedicated to serving the personnel in the global power industry.
Join IEE-Business, not only can you discover power equipment and power knowledge, but also canhnd like - minded friends!