| Brand | Switchgear parts |
| Model NO. | Insulation rod for 252kV GIS circuit breaker |
| Rated voltage | 252kV |
| Series | RN |
The insulation rod for 252kV GIS circuit breaker is the core transmission component in ultra-high voltage gas insulated metal enclosed switchgear (GIS). Its technical characteristics and domestic progress are as follows:
1、 Core performance requirements
Electrical insulation performance
It needs to withstand 252kV power frequency voltage (1210kV/1min) and lightning impulse voltage (± 2400kV/15 times), with a dielectric strength of ≥ 30kV/mm
The surface electric field strength should be controlled below 15kV/mm to avoid surface discharge
Mechanical performance
The tensile strength should reach 390kN, the mechanical life should be ≥ 10000 times, and the dynamic response frequency should be 0-600Hz
The maximum strain under the impact of opening and closing is concentrated at the bonding point on the contact side, which needs to be verified through 100 full capacity short-circuit current tests
2、 Materials and Structural Design
Mainstream materials
Fiberglass epoxy composite material: high mechanical strength, but fiber arrangement needs to be optimized to reduce the risk of crack propagation
Aramid/polyester fiber epoxy composite material: lightweight and fatigue resistant, suitable for high voltage levels
Structural innovation
Adopting non threaded bonding technology to avoid stress concentration caused by threaded structures
3、 Breakthroughs in Localization and Engineering Applications
Typical applications
252kV GIS is used for ultra-high voltage transmission projects, and 126kV GIS is suitable for new energy generation projects
4、 Technical specifications and standards
Compliant with GB/T 11022-2020 and IEC 60694 standards, the dynamic characteristic testing method has been included in the technical specifications
Note: Customization with drawings is available
-
High- and Low-Voltage Electrical Room Safety Inspection: Strengthening Power System SecurityHigh- and Low-Voltage Cable Lines and Cable Trays Inspect cable trays for proper closure and secure rodent-proof sealing. High- and low-voltage cable trays should be intact and undamaged. Address any abnormalities promptly and maintain records. Check for water seepage in cable trays entering switchrooms located in basements or low-lying areas. Inspect cable pits and trenches for standing water or debris, and promptly drain water and remove contaminants if found. Cables and cable terminations witGarca09/17/2025 -
Transformer Use and Installation: Ensuring Safe and Reliable OperationOperating Conditions for Transformers The installation site must be free from flooding, located at an altitude not exceeding 1,000 meters, and maintained in an ambient temperature not exceeding 40°C. Relative humidity may reach 100% within an operating temperature range of 40°C to -25°C (on-load tap changers and temperature controllers must be rated for -25°C). The installation area should be clean, free from conductive dust and corrosive gases, and equipped with sufficient natural or mechanicalVziman09/17/2025 -
Advantages of SC Series Transformers: Advanced Production Equipment Enabling High ReliabilityHeidrich Pouring Tank Features a fully integrated online film degassing system for enhanced resin quality. Employs static mixing technology—ensuring contamination-free processing with zero waste. Offers programmable mixing ratios and adjustable pouring speed for precise process control. Achieves an internal vacuum level of 0.8 to 2.5 bar, optimizing resin penetration and impregnation.Horizontal and Vertical Cutting Lines Delivers high-precision machining with a tolerance of ±0.01 mm and burr conRockwell09/17/2025 -
Advantages of Dry-Type Transformers: Enhancing Safety and Environmental PerformanceCompared to traditional oil-filled transformers, dry-type transformers offer several advantages. Key benefits of dry-type transformers include:Safety: Dry-type transformers are considered safer as they lack flammable liquid insulation (such as oil). They eliminate risks associated with oil leaks, spills, and related fire hazards. This makes them suitable for indoor installations, especially in areas where fire safety is a priority, such as commercial buildings, hospitals, and schools.EnvironmentVziman09/17/2025 -
Time Relay Accuracy Measurement MethodAccurate time relay measurement requires systematic steps to ensure reliable results. Before measurement, confirm the relay model, rated parameters, and operating environment, maintaining ambient temperature at 20±5°C and humidity below 85%RH. Prepare a high-precision timer (resolution 0.001s), regulated power supply (±1% fluctuation), standard load (matching contact rating), and digital multimeter.Calibrate the timer and power supply, ensuring equipment error is within ±0.5%. Mount the relay onOliver Watts09/17/2025 -
Research on the Application of JSZ3A - B Time Relay in Motor Control SystemTime relays are commonly used industrial control devices. Based on their timing characteristics, they can be classified into three types: on-delay, off-delay, and combined on/off-delay relays. Among these, on-delay time relays are the most widely used and readily available in the market. However, many on-delay relays have a limited number of contacts and only provide timed contacts without instantaneous ones, which poses inconvenience for electrical control circuit designs requiring immediate reEcho09/17/2025
