Digital Timer Switch THC 20-1C Weekly Programmable
Key attributes
| Brand | Switchgear parts |
| Model NO. | Digital Timer Switch THC 20-1C Weekly Programmable |
| Rated voltage | AC220V |
| Rated normal current | 16A |
| Rated frequency | 50/60Hz |
| Series | THC-20 |
Product descriptions from the supplier
The THC-20 series timer is an electronic digital programmable timer that replaces mechanical ones. It has a small set time of 15 minutes and is very easy to operate. At the same time, the display screen of the THC-20 programmable timer adopts LED backlight, and the built-in battery allows it to display 24 hours a day. It can be lit up when operated by the keyboard and runs normally after a power outage, making it a cost-effective digital timer.
THC-20 Programmable Timer Product Features:
1. 24-hour time controller with DIN standard size and DIN35mm standard rail installation.
2. Replace mechanical methods with electronic ones.
3. 15 minutes is a small set time, and the operation is very easy.
4. 24-hour continuous display, LED backlight, illuminated during keyboard operation.
5. Equipped with a built-in battery, it will continue to operate as usual after a power outage.
Features
ItemNo |
THC20-1C 16A,THC20-1C 20A, THC20-1C 25A,THC20-1A 30A |
Switching frequency |
≤1s/d(25℃) |
Contact Capacity |
THC20-1C 16A Resistive: 16A/250VAC(cosφ=1) |
Electrical life |
LCD |
Mounting |
DIN rail mounting |
Voltage range |
AC 220-240V 50Hz/60Hz(Other special voltages can be customized) |
Timing error |
AC 180-250V |
Display |
4VA (max) |
Power cornsumption |
48ON/48OFF |
MEAS |
460x320x290mm |
Relative humidity |
35-85%RH |
Contact |
1NO+1NC/ 1NC |
N.W |
17KG |
G.W |
17.5KG |
Control current |
16A,20A,25A,30A |
Min.switching time |
15 min |
Mechanical life |
10⁵tims (Rated load) |
Temperature |
10~40℃ |
QTY |
100PCS |
Core application scenarios include:
· Commercial scenarios: Timed switching of advertising light boxes and store window lighting;
· Agricultural scenarios: Timed control of greenhouse irrigation systems and seedling fill lights;
· Industrial scenarios: Timed start and stop of small production equipment and exhaust fans;
· Civil scenarios: Timed operation of household aquariums and humidifiers.
The THC 20-1C is a single-channel digital timer switch compatible with AC 220-240V/50-60Hz voltage. It supports 7-day cycle timing and can set multiple groups of on/off programs. Its core functions include power failure memory (built-in lithium battery life ≥ 3 years), 12/24-hour format switching, manual/automatic mode conversion. It adopts 35mm standard DIN rail mounting and is suitable for commercial lighting, agricultural aquaculture, and small equipment timing control scenarios.
Related Products
-
Digital Timer Switch THC 15A Programmable Periodic Timer
-
Digital Timer Switch THC 810 Weekly Programmable
-
Digital Timer Switch TS-GE2 Programmable Periodic Timer
-
GRL8-01 02 Level Control Relay
-
3 Phase GRV8 -09/10 Voltage Relay
-
GRV8-03 to 08 3 Phase Voltage Relay
-
GRW8-01 02 Temperature Monitoring Relay
Related Knowledges
-
Impact of DC Bias in Transformers at Renewable Energy Stations Near UHVDC Grounding ElectrodesImpact of DC Bias in Transformers at Renewable Energy Stations Near UHVDC Grounding ElectrodesWhen the grounding electrode of an Ultra-High-Voltage Direct Current (UHVDC) transmission system is located close to a renewable energy power station, the return current flowing through the earth can cause a rise in ground potential around the electrode area. This ground potential rise leads to a shift in the neutral-point potential of nearby power transformers, inducing DC bias (or DC offset) in their01/15/2026 -
HECI GCB for Generators – Fast SF6 Circuit Breaker1.Definition and Function1.1 Role of the Generator Circuit BreakerThe Generator Circuit Breaker (GCB) is a controllable disconnect point located between the generator and the step-up transformer, serving as an interface between the generator and the power grid. Its primary functions include isolating generator-side faults and enabling operational control during generator synchronization and grid connection. The operating principle of a GCB is not significantly different from that of a standard c01/06/2026 -
Distribution Equipment Transformer Testing, Inspection, and Maintenance1.Transformer Maintenance and Inspection Open the low-voltage (LV) circuit breaker of the transformer under maintenance, remove the control power fuse, and hang a “Do Not Close” warning sign on the switch handle. Open the high-voltage (HV) circuit breaker of the transformer under maintenance, close the grounding switch, fully discharge the transformer, lock the HV switchgear, and hang a “Do Not Close” warning sign on the switch handle. For dry-type transformer maintenance: first clean the porcel12/25/2025 -
How to Test Insulation Resistance of Distribution TransformersIn practical work, insulation resistance of distribution transformers is generally measured twice: the insulation resistance between thehigh-voltage (HV) windingand thelow-voltage (LV) winding plus the transformer tank, and the insulation resistance between theLV windingand theHV winding plus the transformer tank.If both measurements yield acceptable values, it indicates that the insulation among the HV winding, LV winding, and transformer tank is qualified. If either measurement fails, pairwise12/25/2025 -
Design Principles for Pole-Mounted Distribution TransformersDesign Principles for Pole-Mounted Distribution Transformers(1) Location and Layout PrinciplesPole-mounted transformer platforms should be located near the load center or close to critical loads, following the principle of “small capacity, multiple locations” to facilitate equipment replacement and maintenance. For residential power supply, three-phase transformers may be installed nearby based on current demand and future growth projections.(2) Capacity Selection for Three-Phase Pole-Mounted Tr12/25/2025 -
Transformer Noise Control Solutions for Different Installations1.Noise Mitigation for Ground-Level Independent Transformer RoomsMitigation Strategy:First, conduct a power-off inspection and maintenance of the transformer, including replacing aged insulating oil, checking and tightening all fasteners, and cleaning dust from the unit.Second, reinforce the transformer foundation or install vibration isolation devices—such as rubber pads or spring isolators—selected based on the severity of vibration.Finally, strengthen sound insulation at weak points of the ro12/25/2025
