10-30kW Single-phase OFF-Grid Wind&Solar Hybrid Controller
Key attributes
| Brand | Wone Store |
| Model NO. | 10-30kW Single-phase OFF-Grid Wind&Solar Hybrid Controller |
| Rated Output Rating | 30KW |
| Input Voltage | DC240V |
| Series | WIS |
Product descriptions from the supplier
Features
Can be applied in wind, solar, wind&solar hybrid power generation system
Simple structure, complete function
Lowno-load loss byusing industrial frequency transformer
R5232/R5485/GPRS optional (Those with GPR5 can also be monitored through App.
CE certification
Applications
Application in wind, Solar, Wind&Solar hybrid power generation station.
Application in household wind&solar hybrid power generation system.
Power supply for those unmanned regions like the coastal islands, remote mountainous regions and border posts.
Technology Parameters
Technical Parameters |
W100 - 96 |
W100 - 120 |
W100 - 240 |
W200 - 240 |
W300 - 240 |
DC Input Parameters |
|||||
Rated battery voltage |
96VDC |
120VDC |
240VDC |
240VDC |
240VDC |
Input overvoltage point |
136VDC |
170VDC |
340VDC |
340VDC |
340VDC |
Input overvoltage recovery point |
132VDC |
165VDC |
330VDC |
330VDC |
330VDC |
Input undervoltage point |
86.4 VDC |
108VDC |
216VDC |
216VDC |
216VDC |
Input undervoltage recovery point |
96VDC |
120VDC |
240VDC |
240VDC |
240VDC |
AC Output Parameters |
|||||
Output phase number |
Single phase |
||||
Rated output power |
10kW |
10kW |
10kW |
20kW |
30kW |
Rated output voltage |
110/120/220/230/240VAC |
||||
Rated output frequency |
50/60±0.5Hz |
||||
THDi |
<5% |
||||
Efficiency |
|||||
Max. conversion efficiency |
≥85% |
||||
Protection Functions |
|||||
DC input overvoltage protection |
YES |
||||
DC reversed connection protection |
YES |
||||
AC output overload protection |
YES |
||||
AC short circuit protection |
YES |
||||
Surge protection |
YES |
||||
Over - temperature protection |
YES |
||||
General Parameters |
|||||
Display mode |
LCD |
||||
Display information |
Battery voltage, inverter voltage, inverter current, inverter power, and working status of battery overvoltage/undervoltage and AC output overload/short circuit. |
||||
Monitoring mode(optional) |
RS232/RS485/GPRS |
||||
Monitoring Contents
|
Real-time display: Battery voltage, inverter voltage,inverter current, inverter power, and working status of battery overvoltage/undervoltage and AC output overload/short circuit. |
||||
Parameter setting: overvoltage point, overvoltage recovery point, undervoltage point, and undervoltage recovery point. |
|||||
Isolation mode |
Industrial frequency isolation |
||||
No-load current |
≤1.5A |
≤1.5A |
≤1.5A |
≤1.5A |
≤1.5A |
Environment |
|||||
Temperature |
-20℃~+40℃ |
||||
Humidity |
5%~95%, No condensing |
||||
Noise |
<60dB |
||||
Cooling mode |
Forced air cooling |
||||
Cover protection class |
IP20 |
||||
Product |
|||||
Product dimension(W*H*D) |
500x725x500mm |
600x1180x600mm |
|||
Product net weight |
75kg |
200kg |
260kg |
||
Note: Part of parameters can be adjusted according to customer's specific demand. |
|||||
Related Products
-
100-600W high-performance wind-solar complementary controller
-
10-30kW Three-phase OFF-Grid Wind&Solar Hybrid Controller
-
1-30KW off-gird wind power controller
-
50KW ON/OFF Grid Wind Power controller
-
30KW ON/OFF Grid Wind Power controller
-
20KW ON/OFF Grid Wind Power controller
-
10KW ON/OFF Grid Wind Power controller
Related Knowledges
-
What Are the Top 10 Taboos and Precautions in the Installation of Distribution Boards and Cabinets?There are many taboos and problematic practices in the installation of distribution boards and cabinets that must be noted. Especially in certain areas, improper operations during installation may lead to serious consequences. For cases where the precautions were not followed, some corrective measures are also provided here to remedy previous mistakes. Let’s follow along and take a look at common installation taboos from manufacturers regarding distribution boxes and cabinets!1. Taboo: LightingJames11/04/2025 -
How to Overhaul a Transformer Conservator (Oil Pillow)?Overhaul Items for Transformer Conservator:1. Ordinary-Type Conservator Remove the end covers on both sides of the conservator, clean rust and oil deposits from inner and outer surfaces, then apply insulating varnish to the inner wall and paint to the outer wall; Clean components such as the dirt collector, oil level gauge, and oil plug; Check that the connecting pipe between the explosion-proof device and the conservator is unobstructed; Replace all sealing gaskets to ensure good sealing with nFelix Spark11/04/2025 -
What are the causes of failures in low-voltage switchgear circuit breakers themselves?Based on years of field statistics on switchgear accidents, combined with analysis focusing on the circuit breaker itself, the main causes have been identified as: failure of operation mechanism; insulation faults; poor breaking and closing performance; and poor conductivity.1.Failure of Operation MechanismFailure of operation mechanism manifests as delayed operation or unintended operation. Since the most basic and important function of a high-voltage circuit breaker is to operate correctly andFelix Spark11/04/2025 -
What Are the Factors Influencing the Impact of Lightning on 10kV Distribution Lines?1. Induced Lightning OvervoltageInduced lightning overvoltage refers to the transient overvoltage generated on overhead distribution lines due to nearby lightning discharges, even when the line is not directly struck. When a lightning flash occurs in the vicinity, it induces a large amount of charge on the conductors—opposite in polarity to the charge in the thundercloud.Statistical data shows that lightning-related faults caused by induced overvoltages account for approximately 90% of total fauEcho11/03/2025 -
THD Measurement Error Standards for Power SystemsError Tolerance of Total Harmonic Distortion (THD): A Comprehensive Analysis Based on Application Scenarios, Equipment Accuracy, and Industry StandardsThe acceptable error range for Total Harmonic Distortion (THD) must be evaluated based on specific application contexts, measurement equipment accuracy, and applicable industry standards. Below is a detailed analysis of key performance indicators in power systems, industrial equipment, and general measurement applications.1. Harmonic Error StandarEdwiin11/03/2025 -
Why is it difficult to increase the voltage level?The solid-state transformer (SST), also known as a power electronic transformer (PET), uses voltage level as a key indicator of its technological maturity and application scenarios. Currently, SSTs have reached voltage levels of 10 kV and 35 kV on the medium-voltage distribution side, while on the high-voltage transmission side, they remain in the stage of laboratory research and prototype validation. The table below clearly illustrates the current status of voltage levels across different appliEcho11/03/2025
Related Solutions
-
Dedicated Vacuum Contactor Solution for Port Shore Power SystemsI. Background and ChallengesShore power systems have become core technical equipment for ports to reduce carbon emissions and noise pollution. However, these systems face two major challenges in the harsh operational environment of ports:Severe Environmental Corrosion: High humidity and salt spray in port areas cause serious corrosion to metal components and enclosures of electrical equipment, significantly impacting electrical lifespan and operational reliability.High Switching Requirements:Wone Store09/13/2025 -
ABB Vacuum Contactor KC2 Power Supply System Technical Transformation PlanIssue OverviewThe 10kV air compressor starting system of a company utilizes the ABB vacuum contactor KC2 as the control component for the operating circuit. The dedicated wide-voltage power supply module paired with this contactor presents the following issues:Frequent failures: The power supply module fails to properly transition the voltage from 300V to 12V, resulting in fuse blowouts.Poor heat dissipation: Enclosed installation of the module leads to insufficient heat dissipation, accelerWone Store09/13/2025 -
Solution for Medium-Voltage Motor Control and Protection Using Vacuum Contactor-Fuse (VCF) in a Coal Conveying System1.Project BackgroundA coal conveying system comprises 15 belt conveyors driven by medium-voltage motors. The system operates under complex conditions, with motors often subjected to heavy loads and frequent starts. To address these challenges and achieve effective control and reliable protection during motor startup, the project comprehensively adopts Vacuum Contactor-Fuse (VCF) combination devices for the 6kV medium-voltage motor power distribution. This solution details the technical features,Wone Store09/13/2025
