400V, 690V, 1000V (AC/DC) Voltage and Continuity Tester - IEE-Business

English
RFQ

Download the app

400V, 690V, 1000V (AC/DC) Voltage and Continuity Tester

$30.00

Model

Basic info Product Detail Supplier

Basic info

Brand	Wone
Model NO.	UT18E Voltage and Continuity Tester
Frequency range	50/60Hz
Voltage range	50V
Series	VCT18E

Product Detail

Feature

ertifications: CE, UKCA

8 voltage levels: 12V, 24V, 50V, 120V, 230V, 400V, 690V, 1000V (AC/DC)
Phase sequence test
Automatic polarity test
Continuity test
RCD function
Auto power off
Frequency measurement
Low impedance measurement
LED+LCD display at the same time
Buzzer alarm
Flashlight
Safety rating: CAT III 1000V / CAT IV 600V

Specifications

How is continuity tested?

Probe Contact: Touch the two probes to two points in the circuit.
Resistance Detection: The internal circuitry of the tester detects the resistance between these two points.
Buzzer Feedback: If the resistance is below a preset threshold (usually a few tens of ohms), the buzzer will sound, indicating that the circuit is conductive.

Know your supplier

Wone

Main Categories

High Voltage Electrical Apparatus/Low Voltage Electrical Apparatus/Wire cable/Instrument meters/New energy/Tester/Production equipment/Generator/Electrical fittings/Integrated Electrical Equipment

Business Type

Design/Manufacture/Sales

Highest Annual Export (USD)

$50,000,000

Professional Experience

1 years

Workplace

65666m²m²

占位

占位

Related Products

Related Knowledges

Withstand voltage test of high-voltage cables

Withstand voltage test of high-voltage cables

Withstand voltage test is an insulation test, but it is a destructive test that can reveal insulation defects difficult to detect in non-destructive testing.The test cycle for high-voltage cables is three years, and it must be conducted after non-destructive tests. In other words, the withstand voltage test is performed only after all non-destructive tests have been passed.Most high-voltage cables used today are cross-linked polyethylene (XLPE) cables, which can have large cross-sections and cov

Analysis of Abnormal Causes of High-Voltage Cable Grounding Circulation and Typical Cases

Analysis of Abnormal Causes of High-Voltage Cable Grounding Circulation and Typical Cases

I. Introduction to Cable Grounding Loop CurrentCables rated 110 kV and above use a single-core structure. The alternating magnetic field generated by the operating current induces a voltage on the metallic sheath. If the sheath forms a closed circuit through the earth, a grounding loop current will flow on the metallic sheath. Excessive grounding loop current (loop current exceeding 50 A, more than 20% of the load current, or a ratio of maximum-to-minimum phase current greater than 3) not only a

Considerations and Recommendations for Flame-Retardant Selection of High-Voltage Cables

Considerations and Recommendations for Flame-Retardant Selection of High-Voltage Cables

1.Flame-Retardant Cable Classification StandardsThe flame-retardant standard system is divided into two main categories. The first category follows the "Classification of Burning Behavior for Electric and Optical Fiber Cables" GB 31247. Cables complying with this standard system are widely used in densely populated areas such as high-speed railways and subways. This standard imposes strict requirements on parameters such as smoke density, heat release, and total smoke production, and cables typi

Repair of high-voltage cable metallic sheaths

Repair of high-voltage cable metallic sheaths

I. Functions of Metallic Sheaths and Necessity of RepairThe metallic sheath of high-voltage cables is a metal shielding structure laid outside the insulation layer, including types such as lead sheaths, aluminum sheaths, and steel wire armor. Its core functions include mechanical protection (resisting external impact and compression), electrochemical corrosion protection (isolating moisture and soil pollutants), electromagnetic shielding (reducing electromagnetic interference to the environment)

What factors need to be considered when designing a transformer?

What factors need to be considered when designing a transformer?

Transformer design is a complex process that requires consideration of multiple factors to ensure safe and efficient operation. In addition, compliance with international and local regulations is essential to guarantee that transformers meet safety and performance standards. Below are key factors to consider in transformer design and the relevant regulations to follow:Transformer Design Factors: Voltage and Frequency: Determine the input and output voltage levels and the operating frequency. The

What failure modes are possible in a transformer? How to identify and fix these failures?

What failure modes are possible in a transformer? How to identify and fix these failures?

Transformers are critical components in power systems, and various failure modes can affect their operation. Timely identification and resolution of these failure modes are essential to prevent costly downtime and ensure system reliability. Below are some common transformer failure modes, along with methods to identify and address them: Insulation FailureIdentification: Insulation failure leads to decreased insulation resistance, which can be detected through insulation resistance testing (megge