lae frekwensie aanlyn UPS kragvoorsiening (3-fase invoer 1-fase uitvoer)
Sleutelkenmerke
| Handelmerk | Switchgear parts |
| Modelnommer | lae frekwensie aanlyn UPS kragvoorsiening (3-fase invoer 1-fase uitvoer) |
| Gedraaide frekwensie | 50/60Hz |
| Uitvoer-spanning | 405VDC/220VDC |
| Ingangspanning | 380V |
| Kapasiteit | 15kVA |
| Reeks | HBD |
Produkbeskrywings van die voorsienier
Produkteienskappe
Intelligente digitale beheertechnologie
Deur Intel-hoëspoed-mikrobestuurders en programmeerbare logikaapparate te gebruik, word sirkusbeheer, parameterinstelling, bedryfsbestuur, gevorderde selftoetsing- en selfopsporingfunksies bereik. Dit kan selftoetsing en foutanalise uitvoer op al die onafhanklike sirkuskonneksies op die sirkusplaat. Jy kan volledig vertrou op die digitaal omskepte sinusgolfspanning en die nuwe oplossing vir perfekte bedryf om jou werklike behoeftes te bevredig.
Effektiewe IGBT (geïsoleerde hekgesele transistor) invertertegnologie
IGBT het uitsonderlike hoëspoedskakelkenmerke; Dit het werkskenmerke van hoë spannings en hoë stroom; Deur spanningsaangedrewe te gebruik, is slegs 'n klein beheerspanning nodig. Die sesde generasie IGBT het 'n laer versteuringspanningsval, hoër inverterdoeltreffendheid en hoër betroubaarheid.
Uitsonderlike belkenmerke
Voldoen volledig aan die oorgang van 0 tot 100% bel sonder om na 'n omweg oor te skakel, en beskerm stabiele en betroubare uitset.
Gemenskaplike groot skerm LCD-weergawe in beide Chinees en Engels
Die groot skerm wys 'n menu in beide Chinees en Engels, met 'n duidelike vloeidiagram wat die operasionele status wys, wat die buigsame implementering van mens-masjien-gesprekfunksies toelaat. Intuïtiewe LED-statusaanwysing, werkstroomstyl-statusaanwysing, duidelik op 'n oogopslag.
Hoë prestasie dinamiese kenmerke
Verskeie terugvoerbeheer soos oombliklike beheer en effektiewe waarde word aangewend om hoë dinamiese regulerings en verminderde uitsetspanningsversteuring te bereik.
Volledige beskermingsfunksie
Verskeie stelselbeskermings- en waarskuwingsfunksies, insluitend invoer/uitvoer oorspanningsbeskerming, invoerslagbeskerming, fasevolgordebeskerming, batterylagespanningsbeskerming, uitvoeroorspanningsbeskerming, en hoë temperatuurbeskerming.
Intelligente batteriebestuur
Intelligente batterielading: Pas outomaties die ladingparameters van die batterie aan volgens die gebruiker se batteriekonfigurasie, en voer gelykmatige en dreunladingomskakeling, temperatuurkompensasie lading en aflading bestuur op die batterie uit volgens die kragvoorsieningsomgewing. Verleng die leeftyd van die batterie en verminder die belasting van bestuurders.
Gebruik van 'n 6-puls (opsioneel 12 puls) rektifiserlaadertjie terwyl 'n invoerharmoniese filter bygevoeg word
Druk effektief invoerharmoniese besoedeling, verbeter die invoerkragfaktor van UPS-kragvoorsiening, en verminder invoerharmoniese stroom.
intelligente monitoring
RS232 en RS485 kommunikasieports maak werklik multi-doel kommunikasie en afstandbediening moontlik. Opsionele SNMP-kaart vir afstandbediening en netwerkbestuur; Opsionele droëkontakinterface, deur middel van pasiewe kontakte om die status van UPS te moniteer.
Toepassingsveld
Geskik vir industrieë soos finansies, telekomunikasie, aandele, belasting, vervoer, versekering, regering, gebou-verligting, padverkeersverligting, elektrisiteit, en industriële en mynbouondernemings.
Tegniese spesifikasies
| Model | HBD-6KS | HBD-10KS | HBD-15KS | HBD-20KS | HBD-30KS | HBD-40KS | HBD-50KS | HBD-60KS | HBD-80KS |
|---|---|---|---|---|---|---|---|---|---|
| Nominal Capacity | 6KVA | 10KVA | 15KVA | 20KVA | 30KVA | 40KVA | 50KVA | 60KVA | 80KVA |
| Working Mode and Principle | Online Power Supply, Static Bypass Switch (No-break Switching), Double Conversion Technology | Online Power Supply, Static Bypass Switch (No-break Switching), Double Conversion Technology | Online Power Supply, Static Bypass Switch (No-break Switching), Double Conversion Technology | Online Power Supply, Static Bypass Switch (No-break Switching), Double Conversion Technology | Online Power Supply, Static Bypass Switch (No-break Switching), Double Conversion Technology | Online Power Supply, Static Bypass Switch (No-break Switching), Double Conversion Technology | Online Power Supply, Static Bypass Switch (No-break Switching), Double Conversion Technology | Online Power Supply, Static Bypass Switch (No-break Switching), Double Conversion Technology | Online Power Supply, Static Bypass Switch (No-break Switching), Double Conversion Technology |
| AC Input | |||||||||
| Phase Number | Three Phase (A, B, C+N+G) | Three Phase (A, B, C+N+G) | Three Phase (A, B, C+N+G) | Three Phase (A, B, C+N+G) | Three Phase (A, B, C+N+G) | Three Phase (A, B, C+N+G) | Three Phase (A, B, C+N+G) | Three Phase (A, B, C+N+G) | Three Phase (A, B, C+N+G) |
| Input Nominal Voltage | 380 VAC | 380 VAC | 380 VAC | 380 VAC | 380 VAC | 380 VAC | 380 VAC | 380 VAC | 380 VAC |
| Input Voltage Range | ± 25% | ± 25% | ± 25% | ± 25% | ± 25% | ± 25% | ± 25% | ± 25% | ± 25% |
| Nominal Frequency | 50Hz ± 10%, 60Hz ± 10% | 50Hz ± 10%, 60Hz ± 10% | 50Hz ± 10%, 60Hz ± 10% | 50Hz ± 10%, 60Hz ± 10% | 50Hz ± 10%, 60Hz ± 10% | 50Hz ± 10%, 60Hz ± 10% | 50Hz ± 10%, 60Hz ± 10% | 50Hz ± 10%, 60Hz ± 10% | 50Hz ± 10%, 60Hz ± 10% |
| Voltage Harmonic Distortion | <5% | <5% | <5% | <5% | <5% | <5% | <5% | <5% | <5% |
| Soft Start | 0~100% 5sec | 0~100% 5sec | 0~100% 5sec | 0~100% 5sec | 0~100% 5sec | 0~100% 5sec | 0~100% 5sec | 0~100% 5sec | 0~100% 5sec |
| Battery (Maintenance-free Lead-acid Battery) | |||||||||
| Nominal Voltage | 360VDC/192VDC | 360VDC/192VDC | 360VDC/192VDC | 360VDC/192VDC | 360VDC/192VDC | 360VDC/192VDC | 360VDC/192VDC | 360VDC/192VDC | 360VDC/192VDC |
| Quantity Unit | 30 cells/12V in series (16 cells/12V in series) | 30 cells/12V in series (16 cells/12V in series) | 30 cells/12V in series (16 cells/12V in series) | 30 cells/12V in series (16 cells/12V in series) | 30 cells/12V in series (16 cells/12V in series) | 30 cells/12V in series (16 cells/12V in series) | 30 cells/12V in series (16 cells/12V in series) | 30 cells/12V in series (16 cells/12V in series) | 30 cells/12V in series (16 cells/12V in series) |
| Charging | |||||||||
| Maximum Output Voltage | 405VDC/220VDC | 405VDC/220VDC | 405VDC/220VDC | 405VDC/220VDC | 405VDC/220VDC | 405VDC/220VDC | 405VDC/220VDC | 405VDC/220VDC | 405VDC/220VDC |
| Float Voltage | 405VDC/220VDC (Automatic Battery Equalization Once Every 3 Months, Charging Voltage 435VDC/232VDC) | 405VDC/220VDC (Automatic Battery Equalization Once Every 3 Months, Charging Voltage 435VDC/232VDC) | 405VDC/220VDC (Automatic Battery Equalization Once Every 3 Months, Charging Voltage 435VDC/232VDC) | 405VDC/220VDC (Automatic Battery Equalization Once Every 3 Months, Charging Voltage 435VDC/232VDC) | 405VDC/220VDC (Automatic Battery Equalization Once Every 3 Months, Charging Voltage 435VDC/232VDC) | 405VDC/220VDC (Automatic Battery Equalization Once Every 3 Months, Charging Voltage 435VDC/232VDC) | 405VDC/220VDC (Automatic Battery Equalization Once Every 3 Months, Charging Voltage 435VDC/232VDC) | 405VDC/220VDC (Automatic Battery Equalization Once Every 3 Months, Charging Voltage 435VDC/232VDC) | 405VDC/220VDC (Automatic Battery Equalization Once Every 3 Months, Charging Voltage 435VDC/232VDC) |
| Microcomputer-set Charging Current | 1A~50A (Automatically Adjusted to 0.1C According to Battery Capacity) | 1A~50A (Automatically Adjusted to 0.1C According to Battery Capacity) | 1A~50A (Automatically Adjusted to 0.1C According to Battery Capacity) | 1A~50A (Automatically Adjusted to 0.1C According to Battery Capacity) | 1A~50A (Automatically Adjusted to 0.1C According to Battery Capacity) | 1A~50A (Automatically Adjusted to 0.1C According to Battery Capacity) | 1A~50A (Automatically Adjusted to 0.1C According to Battery Capacity) | 1A~50A (Automatically Adjusted to 0.1C According to Battery Capacity) | 1A~50A (Automatically Adjusted to 0.1C According to Battery Capacity) |
| AC Output | |||||||||
| Rated Power (KW COSφ=0.8) | Nominal Power × 0.8 | Nominal Power × 0.8 | Nominal Power × 0.8 | Nominal Power × 0.8 | Nominal Power × 0.8 | Nominal Power × 0.8 | Nominal Power × 0.8 | Nominal Power × 0.8 | Nominal Power × 0.8 |
| Phase Number | Single Phase (L+N+G) | Single Phase (L+N+G) | Single Phase (L+N+G) | Single Phase (L+N+G) | Single Phase (L+N+G) | Single Phase (L+N+G) | Single Phase (L+N+G) | Single Phase (L+N+G) | Single Phase (L+N+G) |
| Nominal Phase Voltage | 220VAC ± 1% (Stable Load), 220VAC ± 5% (Load Fluctuation) | 220VAC ± 1% (Stable Load), 220VAC ± 5% (Load Fluctuation) | 220VAC ± 1% (Stable Load), 220VAC ± 5% (Load Fluctuation) | 220VAC ± 1% (Stable Load), 220VAC ± 5% (Load Fluctuation) | 220VAC ± 1% (Stable Load), 220VAC ± 5% (Load Fluctuation) | 220VAC ± 1% (Stable Load), 220VAC ± 5% (Load Fluctuation) | 220VAC ± 1% (Stable Load), 220VAC ± 5% (Load Fluctuation) | 220VAC ± 1% (Stable Load), 220VAC ± 5% (Load Fluctuation) | 220VAC ± 1% (Stable Load), 220VAC ± 5% (Load Fluctuation) |
| Nominal Frequency | 50Hz ± 0.1% (Battery Power Supply) | 50Hz ± 0.1% (Battery Power Supply) | 50Hz ± 0.1% (Battery Power Supply) | 50Hz ± 0.1% (Battery Power Supply) | 50Hz ± 0.1% (Battery Power Supply) | 50Hz ± 0.1% (Battery Power Supply) | 50Hz ± 0.1% (Battery Power Supply) | 50Hz ± 0.1% (Battery Power Supply) | 50Hz ± 0.1% (Battery Power Supply) |
| Frequency Stability: Asynchronous | < ± 0.1% | < ± 0.1% | < ± 0.1% | < ± 0.1% | < ± 0.1% | < ± 0.1% | < ± 0.1% | < ± 0.1% | < ± 0.1% |
| Frequency Stability: Synchronous | < ± 5% | < ± 5% | < ± 5% | < ± 5% | < ± 5% | < ± 5% | < ± 5% | < ± 5% | < ± 5% |
| Crest Factor | 3: 1 | 3: 1 | 3: 1 | 3: 1 | 3: 1 | 3: 1 | 3: 1 | 3: 1 | 3: 1 |
| Output Waveform | Sine Wave | Sine Wave | Sine Wave | Sine Wave | Sine Wave | Sine Wave | Sine Wave | Sine Wave | Sine Wave |
| Total Harmonic Distortion | Linear Load < 3%; Non-linear Load < 5% | Linear Load < 3%; Non-linear Load < 5% | Linear Load < 3%; Non-linear Load < 5% | Linear Load < 3%; Non-linear Load < 5% | Linear Load < 3%; Non-linear Load < 5% | Linear Load < 3%; Non-linear Load < 5% | Linear Load < 3%; Non-linear Load < 5% | Linear Load < 3%; Non-linear Load < 5% | Linear Load < 3%; Non-linear Load < 5% |
| Operating Temperature | 0~40℃ | 0~40℃ | 0~40℃ | 0~40℃ | 0~40℃ | 0~40℃ | 0~40℃ | 0~40℃ | 0~40℃ |
| Relative Humidity | 30%~90% (No Condensation) | 30%~90% (No Condensation) | 30%~90% (No Condensation) | 30%~90% (No Condensation) | 30%~90% (No Condensation) | 30%~90% (No Condensation) | 30%~90% (No Condensation) | 30%~90% (No Condensation) | 30%~90% (No Condensation) |
| Operating Altitude | < 1000 meters (Power Drops by 1% for Every 100 Meters Increase, Maximum 3000 Meters) | < 1000 meters (Power Drops by 1% for Every 100 Meters Increase, Maximum 3000 Meters) | < 1000 meters (Power Drops by 1% for Every 100 Meters Increase, Maximum 3000 Meters) | < 1000 meters (Power Drops by 1% for Every 100 Meters Increase, Maximum 3000 Meters) | < 1000 meters (Power Drops by 1% for Every 100 Meters Increase, Maximum 3000 Meters) | < 1000 meters (Power Drops by 1% for Every 100 Meters Increase, Maximum 3000 Meters) | < 1000 meters (Power Drops by 1% for Every 100 Meters Increase, Maximum 3000 Meters) | < 1000 meters (Power Drops by 1% for Every 100 Meters Increase, Maximum 3000 Meters) | < 1000 meters (Power Drops by 1% for Every 100 Meters Increase, Maximum 3000 Meters) |
| Options | RS485 Network Adapter (SNMP) / Cabinet Size Can Be Designed According to Requirements | RS485 Network Adapter (SNMP) / Cabinet Size Can Be Designed According to Requirements | RS485 Network Adapter (SNMP) / Cabinet Size Can Be Designed According to Requirements | RS485 Network Adapter (SNMP) / Cabinet Size Can Be Designed According to Requirements | RS485 Network Adapter (SNMP) / Cabinet Size Can Be Designed According to Requirements | RS485 Network Adapter (SNMP) / Cabinet Size Can Be Designed According to Requirements | RS485 Network Adapter (SNMP) / Cabinet Size Can Be Designed According to Requirements | RS485 Network Adapter (SNMP) / Cabinet Size Can Be Designed According to Requirements | RS485 Network Adapter (SNMP) / Cabinet Size Can Be Designed According to Requirements |
| Dimensions (W×D×H) mm | 390×659×860 | 430×760×1350 | 710×720×1450 | 710×850×1500 | - | - | - | 1100×860×1680 | - |
| Main Unit Weight | 150 | 199 | 220 | 305 | 380 | 480 | 566 | 590 | 986 |
Let op: Die model met ingeboude batterij en spesifieke volsspanningsvereistes kan na die werklike situasie van die gebruiker aangepas word, en 'n aparte prysopsomming sal verskaf word.
Online winkel
Punte tydlewering
Reaksietyd
100.0%
≤4h
Bedryfsomsig
Werkplek: 1000m²
Totale personeel:
Hoogste Jaarlikse Uitvoer (VSA): 300000000
Dienste
Geselsaakstype: Verkope
Hoofdskategorieë: Toerustingkomponente/Toerusting vir inspeksie/Laagspanningstoerusting/Meetinstrumente/Produksie-toerusting/Elektriese goudartikels
Levenslange garantiebeheerder
Heel Lewensorg Sorg Dienste vir toerustingverskaffing, gebruik, instandhouding en naverkoop, om veilige bedryf van elektriese toerusting, deurlopende beheer en sorgvrye elektrisiteitsverbruik te verseker
Die toerustingverskaffer het platformkwalifikasiesertifisering en tegniese evaluering deurgegaan, wat aan die bron nakoming, professionele standaarde en betroubaarheid verseker.
Verwante produkte
-
lae frekwensie aanlyn UPS kragtoevoer (enkelvoudige fase 220V)
-
Laagfrequentie aanlyn UPS-stroomvoorsiening (3-fase in en 3-fase uit)
-
Modulêre UpS ononderbroke kragtoevoer
-
Online interaktiewe UPS-stroomtoevoer
-
Reserwebare UPS ononderbreekbare kragvoorsiening
-
Hoë frekwensie aanlyn UPS voorsiening (3Fase In 1Fase Uit)
-
Hoë frekwensie aanlyn UPS-stroomtoevoer (Enkelfase/220V)
Verwante Kennis
-
Driedaanspanningsregelaar bedryfshandleiding & veiligheidstips'n Driefase-spanregelaar is 'n algemene elektriese toestel wat gebruik word om die uitsetspanning van 'n voorsiening te stabiliseer sodat dit aan die vereistes van verskillende laste kan voldoen. Korrekte bedraadingstelle is krities om die regte funksionering van die spanregelaar te verseker. Die volgende beskryf die bedraadingstelle en voorbereidings vir 'n driefase-spanregelaar.1. Bedraadingstelle Sluit die insetterminals van die driefase-spanregelaar aan by die driefase-uitsetterminals van diJames11/29/2025 -
Hoe om Laai-afgestelde Transformators en Tapveranderders te Onderhou?Die meeste tapveranderders maak gebruik van 'n weerstandskombinasie-struktuur, en hul algehele konstruksie kan in drie dele verdeel word: die beheerseksie, die aandryfmechaniekseksie, en die skakelseksie. Onderbelasting-tapveranderders speel 'n belangrike rol in die verbetering van die spanningsooreenstemmingskoers van kragvoorsieningstelsels. Tans word spanningregulering in groot oordraagnette wat districtsgrootte-nette voorsien, hoofsaaklik deur onderbelasting-tapveranderende transformators beFelix Spark11/29/2025 -
Wat is die regulasies en operasionele voorbereidings vir spanskommenspanningsverstelling van onderbelasting-tapveranderende transformators?Laai-tapping is 'n spanningsregulasiemetode wat 'n transformator in staat stel om sy uitvoerspanning te verander deur tappingposisies te switser terwyl dit onder belasting bedryf. Krag-elektroniese switserkomponente bied voordele soos gereeld aan/af-vermoë, vonkvry operasie, en 'n lang lewensduur, wat hulle geskik maak vir gebruik as laai-tappingveranderders in verspreidings-transformateurs. Hierdie artikel stel eers die bedryfsreëls vir laai-tapping-transformators voor, verduidelik dan hul spanEdwiin11/29/2025 -
Kernfunksies van Induksie Spanningsreguleerders VerklaarInduktionsspanningsregelaars word in drie-fase wisselstroom- en enkel-fase tipes ingedeel.Die struktuur van 'n drie-fase induksie-spanningsregelaar is soortgelyk aan dié van 'n drie-fase gewonde-rotor induksiemotor. Die belangrikste verskille is dat die rotasiebereik van die rotor in 'n induksiespanningsregelaar beperk is, en sy stator- en rotorwindings verbind is. Die interne bedraadingsdiagram van 'n drie-fase induksiespanningsregelaar word in Viguur 2-28(a) gewys, wat slegs een fase illustreeJames11/29/2025 -
Spanningsreguleerders in kragstelsels: Eendraaifase versus driedraaifase beginselsSpanningsregulateurs (szsger.com) speel 'n kritieke rol in kragstelsels. Of dit nou enkel- of driefase is, hulle dien om spanning te reguleer, kragverskaffing te stabiliseer, en toerusting in hul onderskeie toepassingsomgewings te beskerm. Die verstaan van die basiese beginsels en hoofstrukture van hierdie twee tipes spanningsregulateurs is van groot belang vir die ontwerp en bedryf & instandhouding van kragstelsels. Hierdie artikel sal die basiese beginsels en hoofstrukture van enkel- en drEdwiin11/29/2025 -
Toepassing van slimme netwerktegnologieë in lynverliesbestuur van lae-spanningstransformerdistrikteAs 'n essensiële komponent van die verspreidingsnetwerk het lae-spanningsverspreidingsareas (hieronder verwys as "lae-spanningstransformerzones") direk invloed op die ekonomiese voordele van elektrisiteitsvoorsieningsondernemings en die kwaliteit van elektrisiteitsverbruik vir eindgebruikers deur hul lynverliesprobleme. Die tradisionele bestuursbenaderinge het egter duidelike tekortkominge in terme van akkuraatheid en doeltreffendheid. In hierdie konteks bied die toepassing van intelligente nettEcho11/29/2025
Nog nie die regte verskaffer gevind nie? Laat goedgekeurde verskaffers jou vind.
Kry Praatskaart Nou
Stuur navraag
Laai af
Kry die IEE-Business-toepassing
Gebruik die IEE-Business app om toerusting te vind kry oplossings verbind met kenners en neem deel aan bedryfsamenwerking waar en wanneer ook al volledig ondersteunend van jou kragprojekte en besigheidsgroei
