lEC Type Rear Connector
Key attributes
| Brand | Switchgear parts |
| Model NO. | lEC Type Rear Connector |
| Rated voltage | 12kV |
| Rated normal current | 630A |
| Series | RW-HCBT |
Product descriptions from the supplier
Summary
630A IEC type Rear connector connect with IEC type tee connector or other model Rear connector,extended cable connection circuit (branch), it can not be directly connected with the sleeve socket, wall bushing and so on. The tail can be plugged directly with insulating plug, but also can be extended to connect with the rear connector of another line or Rear connector with surge arrester. It is suitable for XLPE cable with 25mm²-630mm² cross-section of cable.
Standard packing
Body of tee connector Silicone grease、towels
Stress cone Instruction manual
Positioning chain、 phase ribbon Conductive rod
Gauze Dust cap
Terminals Rulers for installation
Bolt stud Conformity certificat
Technical specification
Item |
Parameter |
Rate voltage |
12kV 24kV 35kV |
Rate current |
630A 630A 630A |
Power frequency withstand voltage for 1 min |
42kV 54kV 117kV |
Impulse voltage (10 times of positive and negative polarity) |
95kV 125kV 200kV |
Partial discharge |
15kV，≤10pC 21kV，≤10pC 45kV，≤10pC |
Shielding resistance |
≤5000Ω |
Ordering information
Product model |
RW-HCBT 12kV-630A-25mm² RW-HCBT 24kV-630A-25mm² RW-HCBT 35kV-630A-25mm² |
RW-HCBT 12kV-630A-35mm² RW-HCBT 24kV-630A-35mm² RW-HCBT 35kV-630A-35mm² |
RW-HCBT 12kV-630A-50mm² RW-HCBT 24kV-630A-50mm² RW-HCBT 35kV-630A-50mm² |
RW-HCBT 12kV-630A-70mm² RW-HCBT 24kV-630A-70mm² RW-HCBT 35kV-630A-70mm² |
RW-HCBT 12kV-630A-120mm² RW-HCBT 24kV-630A-120mm² RW-HCBT 35kV-630A-120mm² |
RW-HCBT 12kV-630A-150mm² RW-HCBT 24kV-630A-150mm² RW-HCBT 35kV-630A-150mm² |
RW-HCBT 12kV-630A-185mm² RW-HCBT 24kV-630A-185mm² RW-HCBT 35kV-630A-185mm² |
RW-HCBT 12kV-630A-240mm² RW-HCBT 24kV-630A-240mm² RW-HCBT 35kV-630A-240mm² |
RW-HCBT 12kV-630A-300mm² RW-HCBT 24kV-630A-300mm² RW-HCBT 35kV-630A-500mm² |
RW-HCBT 12kV-630A-400mm² RW-HCBT 24kV-630A-400mm² RW-HCBT 35kV-630A-500mm² |
RW-HCBT 12kV-630A-500mm² RW-HCBT 24kV-630A-500mm² RW-HCBT 35kV-630A-500mm² |
RW-HCBT 24kV-630A-630mm² RW-HCBT 35kV-630A-630mm²
|
Note: Selection should depend on the outside diameter of insulation of cable, the cable cross-section only for reference
Related Products
Related Knowledges
-
Cabinet Structure and Process Characteristics of Low-Voltage SwitchgearI. IntroductionThe cabinet structure forms the fundamental basis of low-voltage switchgear, making cabinet manufacturing technology the foundation of all foundations. As a structural enclosure, the cabinet must not only meet the functional integration requirements of various electrical units (such as standardized types, modular combinations, and functional distribution), but also satisfy inherent cabinet requirements (such as robustness, reliability, neat appearance, and ease of adjustment). DueGarca10/10/2025 -
What Are the Types and Common Faults of HV Switchgear?High-voltage switchgear is a critical electrical device in power systems. Deterioration in switchgear operating conditions is one of the main causes of power system failures. So, what are the common faults in high-voltage switchgear?I.Classification of High-Voltage Switchgear(1) Outdoor and Indoor TypesBased on installation location, high-voltage switchgear can be classified as outdoor or indoor types. Indoor switchgear is commonly used for systems at 10 kV and below. According to primary circuiNoah10/10/2025 -
Key Technologies for Long-Distance Protection of High-Voltage Transmission LinesLong-distance protection of high-voltage transmission lines primarily relies on technologies such as differential protection, distance protection, and automatic reclosing. Together, these technologies effectively ensure safe power transmission and stable grid operation.In the vast power transmission network, high-voltage transmission lines play a crucial role, acting as energy arteries that deliver electricity from power plants to homes and businesses. However, as transmission lines extend overEncyclopedia10/10/2025 -
What Is the Working Principle of a Power Plant Boiler?The working principle of a power plant boiler is to utilize the thermal energy released from fuel combustion to heat feedwater, producing a sufficient quantity of superheated steam that meets specified parameters and quality requirements. The amount of steam produced is known as the boiler's evaporation capacity, typically measured in tons per hour (t/h). Steam parameters primarily refer to pressure and temperature, expressed in megapascals (MPa) and degrees Celsius (°C), respectively. Steam quaEdwiin10/10/2025 -
What is the principle of live-line washing for substations?Why Do Electrical Equipment Need a "Bath"?Due to atmospheric pollution, contaminants accumulate on insulating porcelain insulators and posts. During rain, this can lead to pollution flashover, which in severe cases may cause insulation breakdown, resulting in short circuits or grounding faults. Therefore, the insulating parts of substation equipment must be periodically washed with water to prevent flashover and avoid insulation degradation that could lead to equipment failure.Which Equipment IsEncyclopedia10/10/2025 -
Why Use Surge Arresters? Key Functions & BenefitsFunction of Surge ArrestersWhen lightning-induced overvoltage travels along overhead power lines into a substation or other buildings, it can cause flashovers or even puncture the insulation of electrical equipment. Therefore, if a protective device—known as a surge arrester—is connected in parallel at the power inlet of the equipment (as shown in Figure 1), it will immediately activate when the overvoltage reaches the preset operating level.The arrester discharges the excess energy, limiting thEdwiin10/10/2025
