Isolator Switch DNH8(HGL) Series Load-Disconnector Switch
Zhejiang Wone IT Service Co., Ltd...
1yrs +
staff 1000+m² US$300000000+
Key attributes
| Brand | Switchgear parts |
| Model NO. | Isolator Switch DNH8(HGL) Series Load-Disconnector Switch |
| Rated normal current | 1250A |
| number of poles | 3P |
| Series | DNH8(HGL) |
Product descriptions from the supplier
Description
Pole Isolator Switches DNH8(HGL) series are designed for use in a variety of applications where circuit turn-on and turn-off or electrical isolation is required. They are available in seven different models, ranging from 63A to 3150A, and feature a modular design with three and four levels (three levels + neutral level for turn-on and turn-off).
Electrical isolation switch is also equipped with a front-side window that indicates the contact’s on/off state, and a rear observation window that allows for direct observation of the contact’s on-off state.
Temperature Range: The ambient air temperature should remain between -5 °C and +40 °C, with relative humidity not exceeding 95%.
Altitude: Installation altitude must not exceed 2000 meters.
Environment: The switch should be used in environments free from explosive hazards and where rain or snow does not intrude.
| Rated current In (A) |
63A |
100A | 160A | 250A |
630A |
||||||||
| Contract heating current Ith (A) |
40 |
63 | 80 | 100 | 125 | 160 | 200 | 250 | 315 | 400 | 500 | 630 | |
| Rated insulation voltage Ui (V) (Installation class IV) |
690 |
690 | 1000 | 1000 |
1000 |
||||||||
| Dielectric strength (V) |
1890 |
1890 | 2200 | 2200 |
2200 |
||||||||
| Rated impulse withstand voltage Uimp kV |
8 |
8 | 12 | 12 |
12 |
||||||||
| Rated operating current le (A) |
AC-21B |
40 |
63 | 80 | 100 | 125 | 160 | 200 | 250 | 315 | 400 | 500 | 630 |
|
AC-22B |
40 |
63 | 80 | 100 | 125 | 160 | 200 | 250 | 315 | 400 | 500 |
630 |
|
|
AC-23B |
40 |
63 | 80 | 100 | 125 | 160 | 200 | 250 | 315 | 400 | 500 | 630 | |
| Motor power P (kW) |
400V |
18.5 | 25 | 40 | 40 | 63 | 80 | 100 | 132 | 160 | 220 | 280 |
315 |
| Rated short-time endurance current lcw (kA Rms) 1s |
2 |
2 | 2 | 2 | 6 | 6 | 9 | 9 | 12.6 | 12.6 | 12.6 |
12.6 |
|
| Rated breaking capacity Icn (A Rms) AC-23B 400V |
320 |
504 | 640 | 800 | 1000 | 1080 | 1600 | 2000 | 2520 | 3200 | 4000 | 5040 | |
| Rated switching capacity Icm (A Rms) AC-23B 400V |
400 |
630 | 800 | 1000 | 1250 | 1600 | 2000 | 2500 | 3150 | 4000 | 5000 | 6300 | |
| Rated short-circuit switching capacity Icm (kA peak) |
2.84 |
2.84 | 2.84 | 2.84 | 9.2 | 9.2 | 15.3 | 15.3 | 25.2 | 25.2 | 25.2 |
25.2 |
|
| Mechanical life 400V |
1700 |
1700 | 1700 | 1700 | 1400 | 1400 | 1400 | 1400 | 800 | 800 | 800 |
800 |
|
| Electrical life 400V |
300 |
300 | 300 | 300 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | |
| Operating torque (Nm) |
1.2 |
1.2 | 1.2 | 1.2 | 6.5 | 6.5 | 10 | 10 | 21 | 21 | 21 |
21 |
|
| Weight (kg) |
3P |
0.4 | 0.4 | 0.55 | 0.55 | 1.2 | 1.2 | 2 | 2 | 4.4 | 4.4 | 4.9 |
4.9 |
|
4P |
0.42 | 0.42 | 0.62 | 0.62 | 1.4 | 1.4 | 2.35 | 2.35 | 5.5 | 5.5 | 6.3 | 6.3 | |
| Rated current In (A) |
1600A |
3150A |
||||||
| Contract heating current Ith (A) |
1000 |
1250 | 1600 | 2000 | 2500 |
3150 |
||
| Rated insulation voltage Ui (V) (Installation class IV) |
1000 |
1000 |
||||||
| Dielectric strength (V) |
2200 |
2200 |
||||||
| Rated impulse withstand voltage Uimp kV |
12 |
12 |
||||||
| Rated operating current le (A) |
AC-21B |
1000 |
1250 | 1600 | 2000 | 2500 | 3150 | |
|
AC-22B |
/ | / | / | / | / |
/ |
||
|
AC-23B |
/ | / | / | / | / |
/ |
||
| Motor power P (kW) |
400V |
560 | 560 | 560 | 710 | 710 |
710 |
|
| Rated short-time endurance current lcw (kA Rms) 1s |
30 |
30 | 30 | 50 | 50 |
50 |
||
| Rated breaking capacity Icn (A Rms) AC-23B 400V |
1500 |
1875 | 2400 | 3000 | 3750 |
4725 |
||
| Rated switching capacity Icm (A Rms) AC-23B 400V |
1500 |
1875 | 2400 | 3000 | 3750 |
4725 |
||
| Rated short-circuit switching capacity Icm (kA peak) |
63 |
63 | 63 | 105 | 105 |
105 |
||
| Mechanical life 400V |
500 |
500 | 500 | 500 | 500 |
500 |
||
| Electrical life 400V |
100 |
100 | 100 | 100 | 100 |
100 |
||
| Operating torque (Nm) |
37 |
37 | 37 | 50 | 50 |
50 |
||
| Weight (kg) |
3P |
13.2 | 14.6 | 15.6 | 25.5 | 25.5 |
31 |
|
|
4P |
14.8 | 17.1 | 18 | 37.5 | 37.5 |
51.5 |
||
Pole Isolator Switch Operating Mode
Pole Load Disconnector
Pole Isolator Switch Outline and Installation Dimension (mm)
|
Specifications |
Overall dimension |
Installation dimension |
|||||||||||||||||
|
In |
A | B | C | D | D1 | E | φL | F | H | N | P | R | S | U | φX | Y | J |
K |
|
|
125A/3 |
140 | 135 | 121 | 15 | 93 | 71 | 5.5 | 50 | 10 | 75 | 36 | 20 | 25 | 115 | 9 | 24 | 120 |
65 |
|
|
125A/4 |
170 | 135 | 121 | 15 | 93 | 71 | 5.5 | 50 | 10 | 75 | 36 | 20 | 25 | 115 | 9 | 24 | 150 |
65 |
|
|
160A/3 |
140 | 135 | 121 | 15 | 93 | 71 | 5.5 | 50 | 10 | 75 | 36 | 20 | 25 | 115 | 9 | 24 | 120 | 65 | |
|
160A/4 |
170 | 135 | 121 | 15 | 93 | 71 | 5.5 | 50 | 10 | 75 | 36 | 20 | 25 | 115 | 9 | 24 | 150 |
65 |
|
|
200A/3 |
180 | 170 | 144 | 20 | 104 | 84 | 5.5 | 79 | 15 | 105 | 50 | 25 | 30 | 140 | 11 | 25 | 160 |
90 |
|
|
200A/4 |
230 | 170 | 144 | 20 | 104 | 84 | 5.5 | 79 | 15 | 105 | 50 | 25 | 30 | 140 | 11 | 25 | 210 |
90 |
|
|
250A/3 |
180 | 170 | 144 | 20 | 104 | 84 | 5.5 | 79 | 15 | 105 | 50 | 25 | 30 | 140 | 11 | 25 | 160 |
90 |
|
|
250A/4 |
230 | 170 | 144 | 20 | 104 | 84 | 5.5 | 79 | 15 | 105 | 50 | 25 | 30 | 140 | 11 | 25 | 210 |
90 |
|
|
315A/3 |
230 | 240 | 188 | 30 | 137 | 115 | 7 | 95 | 20 | 135 | 65 | 32 | 40 | 206 | 11 | 37 | 210 |
140 |
|
|
315A/4 |
290 | 240 | 188 | 30 | 137 | 115 | 7 | 95 | 20 | 135 | 65 | 32 | 40 | 206 | 11 | 37 | 270 |
140 |
|
|
400A/3 |
230 | 240 | 188 | 30 | 137 | 115 | 7 | 95 | 20 | 135 | 65 | 32 | 40 | 206 | 11 | 37 | 210 |
140 |
|
|
400A/4 |
290 | 240 | 188 | 30 | 137 | 115 | 7 | 95 | 20 | 135 | 65 | 32 | 40 | 206 | 11 | 37 | 270 |
140 |
|
|
500A/3 |
230 | 260 | 188 | 30 | 137 | 115 | 7 | 95 | 20 | 135 | 65 | 40 | 50 | 220 | 13 | 37.5 | 210 |
140 |
|
|
500A/4 |
290 | 260 | 188 | 30 | 137 | 115 | 7 | 95 | 20 | 135 | 65 | 40 | 50 | 220 | 13 | 37.5 | 270 |
140 |
|
|
630A/3 |
230 | 260 | 188 | 30 | 137 | 115 | 7 | 95 | 20 | 135 | 65 | 40 | 50 | 220 | 13 | 37.5 | 210 |
140 |
|
|
630A/4 |
290 | 260 | 188 | 30 | 137 | 115 | 7 | 95 | 20 | 135 | 65 | 40 | 50 | 220 | 13 | 37.5 | 270 |
140 |
|
|
Specifications |
Overall dimension |
Installation dimension |
|||||||||||
| In |
A |
B | C | D | D1 | E | φL | F | H | N | P | J |
K |
| 1000A/3 |
378 |
308 | 174 | 120 | 60 | 200 | 35 | 20 | 16.5 | 49 | 353 |
175 |
|
| 1000A/4 |
493 |
310 | 235 | 120 | 60 | 200 | 35 | 20 | 16.5 | 48 | 471 |
174 |
|
| 1250A/3 |
378 |
336 | 174 | 120 | 80 | 200 | 40 | 35 | 16 | 49 | 353 |
175 |
|
| 1250A/4 |
493 |
338 | 235 | 120 | 80 | 200 | 40 | 35 | 16 | 48 | 471 |
174 |
|
| 1600A/3 |
378 |
336 | 174 | 120 | 80 | 200 | 40 | 35 | 16 | 50 | 353 |
175 |
|
| 1600A/4 |
493 |
338 | 235 | 120 | 80 | 200 | 40 | 35 | 16 | 49 | 471 |
174 |
|
| 2000A/3 |
378 |
445 | 174 | 120 | 80 | 200 | 40 | 40 | 20 | 103 | 50 | 353 |
220 |
| 2000A/4 |
493 |
447 | 235 | 120 | 80 | 200 | 40 | 40 | 20 | 104 | 50 | 471 |
220 |
| 2500A/3 |
378 |
445 | 174 | 120 | 80 | 200 | 40 | 40 | 20 | 103 | 65 | 353 |
220 |
| 2500A/4 |
493 |
447 | 235 | 120 | 80 | 200 | 40 | 40 | 20 | 104 | 65 | 471 |
220 |
| 3150A/3 |
378 |
492 | 174 | 120 | 120 | 200 | 50 | 50 | 21 | 77 | 65 | 353 |
220 |
| 3150A/4 |
493 |
494 | 235 | 120 | 120 | 200 | 50 | 50 | 21 | 78 | 65 | 471 | 220 |
The DNH8(HGL) series 3 phase isolator switch provides essential functionality for electrical isolation and circuit control in various applications. Available in models ranging from 63A to 3150A, this modular design incorporates three and four levels (including a neutral level for circuit operation). Additionally, it features a front-side window for indicating the contact state and a rear observation window for easy monitoring.
MV Switchgear Accessories
Zhejiang Wone IT Service Co., Ltd...
1yrs +
staff 1000+m² US$300000000+
Online store
On-time delivery rate
Response time
100.0%
≤4h
Company overview
Workplace: 1000m²
Total staff:
Highest Annual Export(usD): 300000000
Services
Business Type: Sales
Main Categories: Electrical fittings/Equipment Parts/Low Voltage Electrical Apparatus
Whole life care manager
Full lifecycle management services for equipment procurement, use, maintenance, and after-sales,
ensuring safe operation of electrical equipment, continuous control, and worry-free electricity
consumption.
The equipment supplier has passed platform qualification certification and technical evaluation,
ensuring compliance, professionalism, and reliability from the source.
Related Products
Related Knowledges
-
Strange Devices on Transmission Lines: 5 Little-Known Practical Functions（1）1 Aviation Warning SpheresAviation warning spheres, also known as reflective safety spheres, are used on overhead transmission lines near airports, especially on extra-high-voltage (above 220kV) lines and river-crossing transmission lines. Highly visible aviation marker spheres (aviation warning spheres) must be installed along the lines to provide warning signals.The aviation marker sphere (aviation warning sphere) has a diameter of ф=600mm. The sphere can be manufactured in various bright coloLeon09/04/2025 -
Transmission LineIn transmission lines, a "π" connection involves breaking the original line from Substation A to Substation B and inserting Substation C, forming a "π" configuration. After the "π" connection, the original single line is divided into two independent transmission lines. Following the "π" connection, Substations B and C may both be powered by Substation A (in this case, Substation C receives power via a feeder from Substation B's busbar, or possibly from another voltage point within Substation B);Encyclopedia09/04/2025 -
What are the principles of forced re-energization of transmission lines?Principles of Forced Re-energization of Transmission LinesRegulations for Forced Re-energization of Transmission Lines Correctly select the forced re-energization end of the line. If necessary, change the connection configuration before forced re-energization, taking into account the reduction of short-circuit capacity and its impact on grid stability. There must be a transformer with its neutral point directly grounded on the busbar at the forced re-energization end. Pay attention to the impactEdwiin09/04/2025 -
Analysis of Accident Handling in Transmission LinesAnalysis of Transmission Line Fault HandlingAs a fundamental component of the power grid, transmission lines are widely distributed and numerous, often exposed to diverse geographical and climatic conditions, making them highly susceptible to faults. Common causes include overvoltage, pollution flashover, insulation damage, tree encroachment, and external damage. Line tripping is one of the most frequent faults in power plant and substation operations, with fault types including single-phase-to-Leon09/04/2025 -
The difference between transmission and distribution linesTransmission lines and distribution lines are both used to carry electrical power from one location to another. However, they differ significantly in key aspects such as primary function, voltage levels, phase configuration, and conductor placement. These differences are essential for understanding their distinct roles in the power system.The Difference Between Transmission and Distribution Line is given below in the tabulated form.Electricity generation is a critical component of the power systEdwiin09/04/2025 -
Ensuring Reliability: A Deep Dive into Transformer MaintenanceIntroductionElectric transformers are the backbone of modern power distribution systems, silently enabling the reliable delivery of electricity to homes, businesses, and industries. As these critical assets age and the demand for uninterrupted power grows, the importance of diligent transformer maintenance has never been greater. This essay explores the essential role of transformer maintenance, highlighting the value of proactive care, the impact of advanced diagnostic technologies, and the traVziman09/03/2025
Related Solutions
Haven't found the right supplier yet? Let matching verified suppliers find you.
Get Quotation Now
