• DS1 12kV 40.5kV 72.5kV High voltage disconnect switch
DS1 12kV 40.5kV 72.5kV High voltage disconnect switch
discuss personally
Model
DS1-72.5D/2500-40
DS1-72.5D/2000-31.5
DS1-72.5D/1250-31.5
DS1-72.5D/630-31.5
DS1-40.5D/2500-40
DS1-40.5D/2000-31.5
DS1-40.5D/1250-31.5
DS1-40.5D/630-31.5
DS1-12D/2500-40
DS1-12D/2500-31.5
DS1-12D/2000-31.5
DS1-12D/1250-31.5
DS1-12D/630-31.5
Basic info
Brand ROCKWILL
Model NO. DS1 12kV 40.5kV 72.5kV High voltage disconnect switch
Rated voltage 72.5kV
Rated normal current 2500A
Rated frequency 50/60Hz
Rated peak value withstand current 100kA
Rated short-time withstand current 40kA
Series DS1
Product Detail

Product introduction:

DS1-12、40.5、72.5 switch disconnectors  are kinds of outdoor HV electricity transmission equipment’s at three-phase AC frequency of 50Hz/60Hz. It is used for breaking or connecting HV lines under no loads so that the power lines can be changed and connected and the way the electricity runs is changed. In addition, it can be used to exercise safe electrical insulation for such HV electric apparatuses as bus and break.

GW1  switch disconnector have two insulators with vertical open jewels. Vertical breaks Will be formed after closing, phase spacing can be educed. Its structure is simple, and it is a Widely used structure in early switch disconnector 

Product is made of conductive am, post insulator, operating insulator, and base. Conductive arm is derived by operation and connecting rod about 50 •tums up and down, complete the opening and closing operation. According the need, we can match manual or electric mechanism.

Main characteristic:

  • The conductive arm, made of Cu-alloy of high conductance rate is characteristic of high mechanical strength, large radiation area.
  • Self-energy contact finger-Pressure and stable, self-energy contact finger is characterized by high elasticity, high conductivity, high temperature resistant, corrosion resistant properties. The end of the contact finger is fixed, it can avoid increasing contact resistance. Tile contact finger has been acknowledged by the China National Utility Model Patent. The structure has been us的 more than ten years, more than 100000 sets, without overheating feedback.
  • Tile dynamic contact part adopts the self-cleaning structure. Tile products cleaning the contact surface during close and open operation itself, which reduce the contact resistance and avoid healing of contact surface.
  • The rotating parts of Switch disconnector are designed to be free maintenance. Imported self-lubricating shaft sleeve, high quality stainless steel shaft pin, long-lasting aviation grease are used for forever flexile rotation and no clamping stagnation
  • All Switch disconnectors are delivered after complete assembly and adjustment. The product is convention to install, significantly reducing installation work on site.
  • Provide one-key sequential control "double confirmation" function expansion

Main technical parameters:

Order notice :

Product model, rated voltage, rated current, creepage distance must be specified at the goods-ordering time;

The disconnect switch offers several options of grounding;

The operating mechanism, motor voltage, control voltage and the number of contacts for auxiliary switch;

Installation method.

 

 

Know your supplier
ROCKWILL
Rockwill Electric Group Global Manufacturer of High voltage and medium-voltage power equipment and smart grid solutions. Headquartered in Wenzhou, China. Serving 100+ countries with quality, innovation, and trust. What We Offer: • HV-MV switchgear (VCB, SF₆ circuit breakers, RMU, GIS) • Distribution transformers and substations • Smart grid and monitoring systems • Solar, wind, EV charging, and energy storage solutions • EPC turnkey power projects Certified: ISO 9001 / ISO 14001 / ISO 45001
Main Categories
High Voltage Electrical Apparatus
Business Type
Design/Manufacture/Sales
Highest Annual Export (USD)
$150,000,000
Professional Experience
16 years
Workplace
108000m²m²
占位
占位
Related Products
Related Knowledges
What is the difference between a dielectric and an insulator?
What is the difference between a dielectric and an insulator?
Dielectrics and insulators are distinguished primarily by their applications. One of the main differences is that a dielectric can store electrical energy by becoming polarized in an electric field, whereas an insulator resists the flow of electrons to prevent current conduction. Other key differences between them are outlined in the comparison chart below.Definition of DielectricA dielectric material is a type of insulator that contains few or no free electrons. When subjected to an electric fi
Edwiin
08/30/2025
Fault Analysis and Treatment of Oil-Immersed Transformers
Fault Analysis and Treatment of Oil-Immersed Transformers
Oil Leakage at Welded JointsOil leakage at welded joints primarily stems from poor welding quality, such as incomplete or detached welds, and defects like pinholes and gas pores. Although oil-immersed transformers are initially coated with solder and paint during manufacturing, potentially masking these issues temporarily, the defects tend to surface during operation. Additionally, electromagnetic vibration can cause weld cracks, leading to oil leakage.To resolve such leaks, the first critical s
Edwiin
08/29/2025
What losses occur during operation of the transformer? How to reduce losses?
What losses occur during operation of the transformer? How to reduce losses?
Transformers experience various types of losses during operation, primarily categorized into two main types: copper losses and iron losses.Copper LossesCopper losses, also known as I²R losses, are caused by the electrical resistance of the transformer windings—typically made of copper. As current flows through the windings, energy is dissipated in the form of heat. These losses are proportional to the square of the load current (I²R), meaning they increase significantly with high
Rockwell
08/29/2025
Cable Fault Detection, Testing, Location and Repair
Cable Fault Detection, Testing, Location and Repair
I. Methods for Cable Testing and Inspection:Insulation Resistance Test: Use an insulation resistance tester to measure the insulation resistance value of the cable. A high insulation resistance value indicates good insulation, while a low value may suggest insulation problems requiring further investigation.Voltage Withstand Test: Apply a high-voltage test using a high-voltage tester to verify whether the cable can withstand high voltage under its rated operating conditions. Under normal circums
Leon
08/29/2025
Cable Quality Inspection and Cable Detection & Testing
Cable Quality Inspection and Cable Detection & Testing
Power cable quality inspection and cable testing are conducted to ensure that the cable's quality and performance meet specified requirements, thereby guaranteeing the safe and stable operation of power systems. Below are some common contents of power cable quality inspection and cable testing:Visual Inspection: Check the cable surface for physical defects such as damage, deformation, or scratches to ensure the cable's exterior is intact.Dimensional Measurement: Measure dimensional parameters su
Edwiin
08/29/2025
Transformer Detection, Testing, Maintenance and Servicing
Transformer Detection, Testing, Maintenance and Servicing
Transformer testing, inspection, and maintenance are essential tasks to ensure normal operation and extend the service life of transformers. Below are some recommended steps:Visual Inspection: Regularly inspect the transformer's exterior, including the enclosure, cooling system, and oil tank. Ensure the enclosure is intact, free from corrosion, damage, or leakage.Insulation Resistance Testing: Use an insulation resistance tester to check the transformer's insulation system. Verify that the insul
Vziman
08/29/2025
×
Inquiry
Download
IEE-Business is dedicated to serving the personnel in the global power industry.
Join IEE-Business, not only can you discover power equipment and power knowledge, but also canhnd like - minded friends!