• Cold shrinkable outdoor terminal kit
  • Cold shrinkable outdoor terminal kit
  • Cold shrinkable outdoor terminal kit
Cold shrinkable outdoor terminal kit
discuss personally
Model
WLS-35kV
WLS-20kV
WLS-8.7/15kV
Basic info
Brand Switchgear parts
Model NO. Cold shrinkable outdoor terminal kit
Rated voltage 8.7/15kV
Series WLS
Product Detail

ISelf-reset shrink cable accessories is a kind of new cable accessories which is prefabricated by adopting high elasticity silicon rubber. This Iproduct is provided with special dielectric property, the performance of resistance against tracking and corrosion are strong, special water ab sorption rate, the constant shrinkage force, and it will not be insulation dead angle because the cable is bended. When it is installed at locale, it need not the heat source and special tool, so it improves the safety and reliability of product. This product has many other advantages else, such as excellent capability, novel construction and convenient installation, when you use it, you use it,you only need to tear the plank, and then it will self reset. This product is widely used in the following fields: electric power, communication, war industry, metallurgy, mining and petroleum chemical I industry, etc.

Serial No

Product name

Spec model

Applicable of cable cross-section  mm²



3 Cores


1

26/35kV Cold shrinkable outdoor terminal kit

WLS - 35/3.1

50 - 120

2


WLS - 35/3.2

150 - 240

3


WLS - 35/3.3

300 - 400

4


WLS - 35/3.4

500

5

12/20kV Cold shrinkable outdoor terminal kit

WLS - 20/3.1 - 1/2

25 - 50

6


WLS - 20/3.2 - 1/2

70 - 120

7


WLS - 20/3.3 - 1/2

150 - 240

8


WLS - 20/3.4 - 1/2

300 - 400

9

8.7/15kV Cold shrinkable outdoor terminal kit

WLS - 15/3.1

25 - 50

10


WLS - 15/3.2

70 - 120

11


WLS - 15/3.3

150 - 240

12


WLS - 15/3.4

300 - 400

13


WLS - 15/3.5

500 - 630

 

Know your supplier
Switchgear parts
VoltEdge Solutions​​ specializes in manufacturing premium ​​MV switchgear accessories​​ for global power distribution systems. Our product range includes circuit breaker modules, disconnector spares, and surge arrestors, engineered for ​​24kV+ substations​​ and renewable energy plants. With ISO-certified production and 24/7 technical support, we ensure ​​reliability, compliance​​ with IEC standards, and rapid global supply.
Main Categories
Electrical fittings/Equipment Parts
Business Type
Sales
Highest Annual Export (USD)
$300000000
Professional Experience
1 years
Workplace
1000m²
占位
占位
Related Products
Related Knowledges
What are the methods for handling single-phase grounding faults in the small-current grounding system of the distribution network?
What are the methods for handling single-phase grounding faults in the small-current grounding system of the distribution network?
Current Status of Single-Phase Grounding Fault DetectionThe low accuracy of single-phase grounding fault diagnosis in non-effectively grounded systems is attributed to several factors: the variable structure of distribution networks (such as looped and open-loop configurations), diverse system grounding modes (including ungrounded, arc-suppression coil grounded, and low-resistance grounded systems), the increasing annual ratio of cable-based or hybrid overhead-cable wiring, and complex fault typ
Leon
08/01/2025
Neutral line current is actually greater than live line current? Why?
Neutral line current is actually greater than live line current? Why?
In a three-phase four-wire power distribution system, it is a consensus among industry insiders that the neutral line current should be very small when the three-phase loads are balanced. However, more and more phenomena are subverting this concept.For example, the advertising light boxes around a building use fluorescent lighting with electronic ballasts. The loads on the three-phase lines are balanced, with each phase current being approximately 90A, but the neutral line current reaches 160A.I
RW Energy
08/01/2025
Difference Between EMF and Voltage
Difference Between EMF and Voltage
One of the key differences between electromotive force (EMF) and voltage is that EMF refers to the energy supplied to charges, while voltage represents the energy required to move a unit charge from one point to another. Other distinctions between the two are detailed in the comparison chart below.Comparison ChartDefinition of VoltageVoltage is defined as the energy required to move a unit charge from one point to another. It is measured in volts (V) and denoted by the symbolV. Voltage is induce
Dyson
08/01/2025
Case Analysis: Economy and Reliability of 110kV All-Aluminum Winding Power Transformers
Case Analysis: Economy and Reliability of 110kV All-Aluminum Winding Power Transformers
Currently, the market price of copper remains high, fluctuating in the range of 70,000 to 80,000 yuan per ton. In contrast, the price of aluminum stays low, lingering in the range of 18,000 to 20,000 yuan per ton. For power transformers, replacing copper windings with aluminum windings in design will undoubtedly significantly reduce the material cost of products, bringing substantial cost savings to end customers.For a long time, it has been widely believed in the industry that aluminum windings
Ron
08/01/2025
What should be done if the neutral line current is too large?
What should be done if the neutral line current is too large?
As we all know, if an electrical line exceeds its rated load, it will overheat severely, and may even cause a fire. For safety reasons, overcurrent protection devices are therefore installed on lines. Whenever the current in the line exceeds the rated value, the overcurrent protection device will automatically cut off the line to prevent fire. The "excessive neutral line current" mentioned here refers to the phenomenon where the neutral line current is excessively high (more than 1.5 times the p
RW Energy
08/01/2025
What does the lifting inspection of a transformer core include?
What does the lifting inspection of a transformer core include?
1.Environmental Requirements for Transformer Core-Lifting Inspection1.1 General Environmental ConditionsCore - lifting operations are preferably carried out indoors. For large transformers that have to be operated outdoors due to specific conditions, sufficient measures must be taken to prevent moisture and dust contamination.Core - lifting should not be conducted during rainy or snowy weather or when the relative humidity exceeds 75%.The ambient air temperature during core - lifting should not
Rockwell
08/01/2025
×
Inquiry
Download
IEE-Business is dedicated to serving the personnel in the global power industry.
Join IEE-Business, not only can you discover power equipment and power knowledge, but also canhnd like - minded friends!