BSMJ Split Phase Compensation Shunt Capacitor(Split-phase series)
Key attributes
| Brand | Switchgear parts |
| Model NO. | BSMJ Split Phase Compensation Shunt Capacitor(Split-phase series) |
| Rated voltage | 0.25Kv |
| Rated frequency | 50/60Hz |
| Series | BSMJ |
Product descriptions from the supplier
Application
Power reactive compensate technology develop,for three phase unbalance load , you can adapt three phase input cut capacitor way, sub compensate reactive power, so it can make the compensate accuracy is high, saving electric impression is best, so our company develop sub compensate shunt power capacitor,his cover setting neuter lead to terminal block, it can convenient make power capacitor sub cut and input. This product instruction characteristic ,mainly technology data .
Working conditions
Power capacitor should confirm left voltage reduce to rated voltage 10% to input again after the power was cut off ,normally it will need 200s almost. so it would choose the power controller which has input and reput lock time function after cut off the power. If choose normally power controller, it must install speediness discharge power equipment .it would not limited which use adopting same electric factor input and chip switch.
Altitude level is not more than 2000m.
Temperature type: -25/C low temperature, highest temperature is C type (it would not more than 50℃ the average of temperature is not more than 40℃ within 24 hours, one year average of temperature is not more than 30℃ ), power capacitor will work within good ventilate condition. It would not permit within sealing and installation condition
Structure features
Three pcs single phase power capacitor, connect Y-neuter make out (N terminal ),so it make three pcs single phase common body capacitor ,when you use it , AN BN CN is separate units. Absolute unit connect to discharge register, using is very safe.
Any absolute unit damage has over press isolation equipment ,then it can break off.
Main technical date
| Model | Rated line voltage (KV) | Rated phase voltage (KV) | Three-phase capacity (Kvar) | Rated Capacity (μF) | Rated Current (A) |
|---|---|---|---|---|---|
| 0.23-1×3-1 | 0.4 | 0.23 | 3 | 180.6 | 4.3×3 |
| 0.23-1.67×3-1 | 0.4 | 0.23 | 5 | 301.0 | 7.2×3 |
| 0.23-2×3-1 | 0.4 | 0.23 | 6 | 361.2 | 8.7×3 |
| 0.23-2.5×3-1 | 0.4 | 0.23 | 7.5 | 451.5 | 10.9×3 |
| 0.23-3.33×3-1 | 0.4 | 0.23 | 10 | 602.0 | 14.5×3 |
| 0.23-4×3-1 | 0.4 | 0.23 | 12 | 722.0 | 17.4×3 |
| 0.23-5×3-1 | 0.4 | 0.23 | 15 | 903.0 | 21.7×3 |
| 0.23-6.67×3-1 | 0.4 | 0.23 | 20 | 1204.0 | 29.0×3 |
| 0.23-8.33×3-1 | 0.4 | 0.23 | 25 | 1505.0 | 26.2×3 |
| 0.25-1×3-1 | 0.43 | 0.25 | 3 | 152.8 | 4.0×3 |
| 0.25-1.67×3-1 | 0.43 | 0.25 | 5 | 254.8 | 6.7×3 |
| 0.25-2×3-1 | 0.43 | 0.25 | 6 | 305.7 | 8.0×3 |
| 0.25-2.5×3-1 | 0.43 | 0.25 | 7.5 | 382.1 | 10.0×3 |
| 0.25-2.67×3-1 | 0.43 | 0.25 | 8 | 407.6 | 10.7×3 |
| 0.25-3.33×3-1 | 0.43 | 0.25 | 10 | 509.5 | 13.3×3 |
| 0.25-4×3-1 | 0.43 | 0.25 | 12 | 611.5 | 16.0×3 |
| 0.25-5×3-1 | 0.43 | 0.25 | 15 | 764.3 | 20.0×3 |
| 0.25-5.33×3-1 | 0.43 | 0.25 | 16 | 815.3 | 21.3×3 |
| 0.25-6.67×3-1 | 0.43 | 0.25 | 20 | 1019.0 | 26.7×3 |
| 0.25-8.33×3-1 | 0.43 | 0.25 | 25 | 1273.9 | 33.3×3 |
| 0.25-10×3-1 | 0.43 | 0.25 | 30 | 1528.7 | 40.0×3 |
| 0.28-3.33×3-1 | 0.43 | 0.28 | 10 | 406.0 | 11.9×3 |
| 0.28-4×3-1 | 0.43 | 0.28 | 12 | 488.0 | 14.3×3 |
| 0.28-5×3-1 | 0.43 | 0.28 | 15 | 609.0 | 17.9×3 |
| 0.28-6.67×3-1 | 0.43 | 0.28 | 20 | 812.0 | 23.8×3 |
| 0.28-8.33×3-1 | 0.43 | 0.28 | 25 | 1016.0 | 29.8×3 |
| 0.28-10×3-1 | 0.43 | 0.28 | 30 | 1219.0 | 35.7×3 |
| 0.45-9-6 | 0.45 | 0.45 | 9 | 141.0 | 6.67 |
| 0.45-21-6 | 0.45 | 0.45 | 21 | 329.7 | 15.5 |
| Model | H (mm) | Outgoing terminal | Drawing No. |
|---|---|---|---|
| 0.23-1×3-1 | 105 | M6 | 1 |
| 0.23-1.67×3-1 | 125 | M6 | 1 |
| 0.23-2×3-1 | 130 | M6 | 1 |
| 0.23-2.5×3-1 | 160 | M6 | 1 |
| 0.23-3.33×3-1 | 210 | M6 | 2 |
| 0.23-4×3-1 | 210 | M6 | 2 |
| 0.23-5×3-1 | 210 | M6 | 2 |
| 0.23-6.67×3-1 | 260 | M8 | 2 |
| 0.23-8.33×3-1 | 270 | M8 | 4 |
| 0.25-1×3-1 | 105 | M6 | 1 |
| 0.25-1.67×3-1 | 125 | M6 | 1 |
| 0.25-2×3-1 | 125 | M6 | 1 |
| 0.25-2.5×3-1 | 180 | M6 | 1 |
| 0.25-2.67×3-1 | 180 | M6 | 1 |
| 0.25-3.33×3-1 | 180 | M6 | 1 |
| 0.25-4×3-1 | 210 | M6 | 1 |
| 0.25-5×3-1 | 210 | M6 | 2 |
| 0.25-5.33×3-1 | 210 | M6 | 2 |
| 0.25-6.67×3-1 | 210 | M6 | 2 |
| 0.25-8.33×3-1 | 260 | M8 | 2 |
| 0.25-10×3-1 | 270 | M8 | 4 |
| 0.28-3.33×3-1 | 160 | M6 | 1 |
| 0.28-4×3-1 | 210 | M6 | 2 |
| 0.28-5×3-1 | 210 | M6 | 2 |
| 0.28-6.67×3-1 | 210 | M6 | 2 |
| 0.28-8.33×3-1 | 210 | M6 | 2 |
| 0.28-10×3-1 | 260 | M6 | 2 |
| 0.45-9-6 | 120 | M6 | 2 |
| 0.45-21-6 | 160 | M6 | 2 |
Note: Other special specification models supply according to user requirements
Online store
On-time delivery rate
Response time
100.0%
≤4h
Company overview
Workplace: 1000m²
Total staff:
Highest Annual Export(usD): 300000000
Services
Business Type: Sales
Main Categories: Low Voltage Electrical Apparatus/Instrument meters/Production equipment/Tester/High Voltage Electrical Apparatus/Electrical fittings/Equipment Parts
Whole life care manager
Whole-life care management services for equipment procurement, use, maintenance, and after-sales, ensuring safe operation of electrical equipment, continuous control, and worry-free electricity consumption.
The equipment supplier has passed platform qualification certification and technical evaluation, ensuring compliance, professionalism, and reliability from the source.
Related Products
-
ZMZ-C series intellect integration power capacitor
-
Integrated Intelligent Power Capacitor
-
ZMZ-X series intelligent integrated low-voltage filtering power capacitor
-
BSMJ Self-healing low voltage shunt capacitor
-
ZMK Anti-harmonic Low Voltage Shunt Capacitor
-
ZMZ-B series integration power capacitor
-
BSMJ Self-healing Type Low Voltage Shunt Power Capacitor
Related Knowledges
-
How to Judge, Detect and Troubleshoot Transformer Core Faults1. Hazards, Causes, and Types of Multi-Point Grounding Faults in Transformer Cores1.1 Hazards of Multi-Point Grounding Faults in the CoreUnder normal operation, a transformer core must be grounded at only one point. During operation, alternating magnetic fields surround the windings. Due to electromagnetic induction, parasitic capacitances exist between the high-voltage and low-voltage windings, between the low-voltage winding and the core, and between the core and the tank. The energized windin01/27/2026 -
A Brief Discussion on the Selection of Grounding Transformers in Boost StationsA Brief Discussion on the Selection of Grounding Transformers in Boost StationsThe grounding transformer, commonly referred to as "grounding transformer," operates under the condition of being no-load during normal grid operation and overloaded during short-circuit faults. According to the difference in filling medium, common types can be divided into oil-immersed and dry-type; according to phase number, they can be classified into three-phase and single-phase grounding transformers. The groundi01/27/2026 -
Impact of DC Bias in Transformers at Renewable Energy Stations Near UHVDC Grounding ElectrodesImpact of DC Bias in Transformers at Renewable Energy Stations Near UHVDC Grounding ElectrodesWhen the grounding electrode of an Ultra-High-Voltage Direct Current (UHVDC) transmission system is located close to a renewable energy power station, the return current flowing through the earth can cause a rise in ground potential around the electrode area. This ground potential rise leads to a shift in the neutral-point potential of nearby power transformers, inducing DC bias (or DC offset) in their01/15/2026 -
HECI GCB for Generators – Fast SF6 Circuit Breaker1.Definition and Function1.1 Role of the Generator Circuit BreakerThe Generator Circuit Breaker (GCB) is a controllable disconnect point located between the generator and the step-up transformer, serving as an interface between the generator and the power grid. Its primary functions include isolating generator-side faults and enabling operational control during generator synchronization and grid connection. The operating principle of a GCB is not significantly different from that of a standard c01/06/2026 -
Distribution Equipment Transformer Testing, Inspection, and Maintenance1.Transformer Maintenance and Inspection Open the low-voltage (LV) circuit breaker of the transformer under maintenance, remove the control power fuse, and hang a “Do Not Close” warning sign on the switch handle. Open the high-voltage (HV) circuit breaker of the transformer under maintenance, close the grounding switch, fully discharge the transformer, lock the HV switchgear, and hang a “Do Not Close” warning sign on the switch handle. For dry-type transformer maintenance: first clean the porcel12/25/2025 -
How to Test Insulation Resistance of Distribution TransformersIn practical work, insulation resistance of distribution transformers is generally measured twice: the insulation resistance between thehigh-voltage (HV) windingand thelow-voltage (LV) winding plus the transformer tank, and the insulation resistance between theLV windingand theHV winding plus the transformer tank.If both measurements yield acceptable values, it indicates that the insulation among the HV winding, LV winding, and transformer tank is qualified. If either measurement fails, pairwise12/25/2025
Haven't found the right supplier yet? Let matching verified suppliers find you.
Get Quotation Now
Send inquiry
Download
Get the IEE Business Application
Use the IEE-Business app to find equipment, obtain solutions, connect with experts, and participate in industry collaboration anytime, anywhere—fully supporting the development of your power projects and business.
