Amorphous Alloy Dry - type Transformer
Key attributes
| Brand | ROCKWILL |
| Model NO. | Amorphous Alloy Dry - type Transformer |
| Rated voltage | 10kV |
| Rated frequency | 50/60Hz |
| Rated capacity | 630kVA |
| Series | SCBH |
Product descriptions from the supplier
Product Introduction
The SCBH15 amorphous alloy dry-type transformer is an efficient, energy-saving and environmentally friendly transformer. It adopts amorphous alloy core material and features low loss, low noise and high short-circuit resistance. Its no-load loss is significantly lower than that of traditional silicon steel sheet transformers, which can effectively reduce energy waste. It is suitable for places with high requirements for low-carbon environmental protection, such as urban distribution networks, industrial parks and new energy application scenarios. This transformer does not require insulating oil, has excellent fire resistance, is safe and reliable to use, and has low maintenance costs, making it an ideal choice for achieving green power development.
Scope of Application
The SCBH15 amorphous alloy dry-type transformer is widely applicable to fields with high requirements for energy conservation and environmental protection, such as urban power grids, industrial parks, commercial complexes, residential communities, hospitals, schools, airports and other public facilities. In addition, it also has important application value in new energy fields, such as photovoltaic power generation, wind power generation and distributed energy systems.
Product Description
Core Material: Adopts an amorphous alloy core with ultra-low loss characteristics. Compared with traditional silicon steel sheets, it can effectively reduce no-load loss and operating costs.
Structural Design: Dry-type structure, no need for transformer oil, eliminating the risk of oil leakage. It has excellent fire resistance, is safe and reliable, and is suitable for indoor use and densely populated areas.
Operational Performance: Features low noise and low temperature rise design, which can maintain stable performance during long-term high-load operation and extend the service life of the equipment.
Applicable Scenarios: Suitable for various occasions such as urban power grids, industrial parks, commercial complexes, schools, hospitals, airports, photovoltaic and wind power generation.
Main parameters
Rated capacity range |
30kVA ~ 2500kVA |
Primary voltage |
10kV, 6kV or 35kV |
Secondary voltage |
0.4kV or other voltage ratings |
Frequency |
50Hz or 60Hz |
Connect groups |
Dyn11 or Yyn0 |
Executive Standards
GB/T 10228 - 2015 |
Dry - type power transformer technical parameters and requirements |
IEC 60076 |
Power transformers |
IEC 60726 |
Dry - type transformers |
GB/T 4208 - 2017 |
Enclosure protection level (IP code) |
GB/T 17626.5 - 2008 |
EMC test and measurement technology |
Related Products
Related Knowledges
-
Impact of DC Bias in Transformers at Renewable Energy Stations Near UHVDC Grounding ElectrodesImpact of DC Bias in Transformers at Renewable Energy Stations Near UHVDC Grounding ElectrodesWhen the grounding electrode of an Ultra-High-Voltage Direct Current (UHVDC) transmission system is located close to a renewable energy power station, the return current flowing through the earth can cause a rise in ground potential around the electrode area. This ground potential rise leads to a shift in the neutral-point potential of nearby power transformers, inducing DC bias (or DC offset) in their01/15/2026 -
HECI GCB for Generators – Fast SF6 Circuit Breaker1.Definition and Function1.1 Role of the Generator Circuit BreakerThe Generator Circuit Breaker (GCB) is a controllable disconnect point located between the generator and the step-up transformer, serving as an interface between the generator and the power grid. Its primary functions include isolating generator-side faults and enabling operational control during generator synchronization and grid connection. The operating principle of a GCB is not significantly different from that of a standard c01/06/2026 -
Distribution Equipment Transformer Testing, Inspection, and Maintenance1.Transformer Maintenance and Inspection Open the low-voltage (LV) circuit breaker of the transformer under maintenance, remove the control power fuse, and hang a “Do Not Close” warning sign on the switch handle. Open the high-voltage (HV) circuit breaker of the transformer under maintenance, close the grounding switch, fully discharge the transformer, lock the HV switchgear, and hang a “Do Not Close” warning sign on the switch handle. For dry-type transformer maintenance: first clean the porcel12/25/2025 -
How to Test Insulation Resistance of Distribution TransformersIn practical work, insulation resistance of distribution transformers is generally measured twice: the insulation resistance between thehigh-voltage (HV) windingand thelow-voltage (LV) winding plus the transformer tank, and the insulation resistance between theLV windingand theHV winding plus the transformer tank.If both measurements yield acceptable values, it indicates that the insulation among the HV winding, LV winding, and transformer tank is qualified. If either measurement fails, pairwise12/25/2025 -
Design Principles for Pole-Mounted Distribution TransformersDesign Principles for Pole-Mounted Distribution Transformers(1) Location and Layout PrinciplesPole-mounted transformer platforms should be located near the load center or close to critical loads, following the principle of “small capacity, multiple locations” to facilitate equipment replacement and maintenance. For residential power supply, three-phase transformers may be installed nearby based on current demand and future growth projections.(2) Capacity Selection for Three-Phase Pole-Mounted Tr12/25/2025 -
Transformer Noise Control Solutions for Different Installations1.Noise Mitigation for Ground-Level Independent Transformer RoomsMitigation Strategy:First, conduct a power-off inspection and maintenance of the transformer, including replacing aged insulating oil, checking and tightening all fasteners, and cleaning dust from the unit.Second, reinforce the transformer foundation or install vibration isolation devices—such as rubber pads or spring isolators—selected based on the severity of vibration.Finally, strengthen sound insulation at weak points of the ro12/25/2025
Related Solutions
-
Intelligent Operation Solution for 12kV Vacuum Circuit Breakers: Integrating Real-time Monitoring & Lifetime OptimizationⅠ. Equipment Operation & MaintenanceIntelligent Monitoring System IntegrationMulti-parameter Real-time Monitoring: Embedded sensors (temperature, displacement, Hall effect current sensors) track contact temperature rise, mechanical characteristics (opening/closing speed, overtravel), coil current, and partial discharge signals. Data undergoes preprocessing via edge computing prior to cloud upload.Lifetime Prediction Model: Dynamically evaluates remaining lifespan using electrical wear data06/10/2025 -
SF6 Circuit Breaker Solutions for Outdoor Installation (Anti-Pollution & Seismic Resistance)I.Core Challenges in Outdoor InstallationIn high-voltage transmission and distribution systems, SF6 circuit breakers are exposed to complex outdoor environments for extended periods, facing the following critical issues:Pollution & Insulation DegradationDust, salt fog, and industrial pollutants in outdoor environments easily adhere to equipment surfaces. In coastal or industrial areas, pollution levels may reach Class IV, resulting in insufficient creepage distance and triggering flasho05/12/2025 -
12kV Indoor Vacuum Circuit Breaker Southeast Asia Solution: Anti-Corrosion Compact Design12kV Indoor Vacuum Circuit Breaker Southeast Asia Solution: Anti-Corrosion Compact DesignⅠ. Executive SummarySoutheast Asia faces rapidly growing electricity demand alongside environmental challenges including high temperatures, humidity, salt spray corrosion, and grid instability. This solution recommends Solid Insulated Pole-Mounted Vacuum Circuit Breakers (VCB) featuring high reliability, compact design, and smart monitoring. Tailored for tropical climates and industrial scenarios, it06/10/2025
