• Product
  • Suppliers
  • Manufacturers
  • Solutions
  • Free tools
  • Knowledges
  • Experts
  • Communities
Search


What is Mutually Induced EMF?

Edwiin
Edwiin
Field: Power switch
China

Definition of Mutually Induced EMF

Definition: The electromotive force (EMF) induced in a coil due to the change in magnetic flux produced by a neighboring coil linked to it is termed mutually induced EMF. To understand this phenomenon, consider the following example:

Take coil AB where coil B, having N2 turns, is placed in close proximity to coil A with N1 turns, as illustrated in the figure below:

Mutually Induced EMF Explanation

When switch (S) in the circuit is closed, current I1 flows through coil A, generating magnetic flux ϕ1. Most of this flux, denoted ϕ12, couples with adjacent coil B.Adjusting variable resistor R changes the current in coil A, altering the flux linked to coil B and inducing an EMF. This induced EMF is termed mutually induced EMF.The induced EMF direction follows Lenz’s Law, opposing the current change in coil A that caused it. A galvanometer (G) connected to coil B measures this EMF.The rate of flux change in coil B depends on the rate of current change in coil A, highlighting the mutual inductance relationship between the coils.

The magnitude of the mutually induced emf is directly proportional to the rate of change of current in coil A.The proportionality constant M is termed mutual inductance (or the coefficient of mutual inductance), which quantifies the magnetic coupling strength between the coils.

Give a tip and encourage the author!
Recommended
Composition and Working Principle of Photovoltaic Power Generation Systems
Composition and Working Principle of Photovoltaic Power Generation Systems
Composition and Working Principle of Photovoltaic (PV) Power Generation SystemsA photovoltaic (PV) power generation system is primarily composed of PV modules, a controller, an inverter, batteries, and other accessories (batteries are not required for grid-connected systems). Based on whether it relies on the public power grid, PV systems are divided into off-grid and grid-connected types. Off-grid systems operate independently without relying on the utility grid. They are equipped with energy-s
Encyclopedia
10/09/2025
How to Maintain a PV Plant? State Grid Answers 8 Common O&M Questions(2)
How to Maintain a PV Plant? State Grid Answers 8 Common O&M Questions(2)
1. On a scorching sunny day, do damaged vulnerable components need to be replaced immediately?Immediate replacement is not recommended. If replacement is necessary, it is advisable to do so in the early morning or late afternoon. You should contact the power station’s operation and maintenance (O&M) personnel promptly, and have professional staff go to the site for replacement.2. To prevent photovoltaic (PV) modules from being hit by heavy objects, can wire mesh protective screens be install
Encyclopedia
09/06/2025
How to Maintain a PV Plant? State Grid Answers 8 Common O&M Questions(1)
How to Maintain a PV Plant? State Grid Answers 8 Common O&M Questions(1)
1. What are the common faults of distributed photovoltaic (PV) power generation systems? What typical problems may occur in various components of the system?Common faults include inverters failing to operate or start due to voltage not reaching the startup set value, and low power generation caused by issues with PV modules or inverters. Typical problems that may occur in system components are burnout of junction boxes and local burnout of PV modules.2. How to handle common faults of distributed
Leon
09/06/2025
Short Circuit vs. Overload: Understanding the Differences and How to Protect Your Power System
Short Circuit vs. Overload: Understanding the Differences and How to Protect Your Power System
One of the main differences between a short circuit and an overload is that a short circuit occurs due to a fault between conductors (line-to-line) or between a conductor and earth (line-to-ground), whereas an overload refers to a situation where equipment draws more current than its rated capacity from the power supply.Other key differences between the two are explained in the comparison chart below.The term "overload" typically refers to a condition in a circuit or connected device. A circuit
Edwiin
08/28/2025
Send inquiry
Download
Get the IEE Business Application
Use the IEE-Business app to find equipment, obtain solutions, connect with experts, and participate in industry collaboration anytime, anywhere—fully supporting the development of your power projects and business.