T/V Series Pressure Relief Valves & Devices
Key attributes
| Brand | Transformer Parts |
| Model NO. | T/V Series Pressure Relief Valves & Devices |
| Installation diameter | 80 |
| Series | T/V Series |
Product descriptions from the supplier
Overview
Pressure rise in liquid-filled transformers is a very important parameter to determine signs of deterioration in performance or upcoming failure.
Pressure Relief Valves and Devices are used to prevent rapid build-up of pressure within the transformer tank.
The Pressure Relief Valve or Device will trigger when accidental, instantaneous, and uncontrolled increases in pressure to avoid an explosion. Certain models allow to direct the oil to reduce the risk to personnel and diminish the environmental impact of an oil spill.
The Pressure Relief Valves (PRV) and Pressure Relief Devices (PRD) are designed to discharge the pressure very quickly and at pre-set thresholds. Our PRV or PRD will discharge rapidly increasing
internal pressures that could be caused by a sudden and violent short circuit inside a transformer. These safety accessories reduce risk of possible injury to nearby personnel, equipment and environmental damages that would be caused by a catastrophic transformer failure.
Features:
● Flexibility in product sizes
● Robust design and field-proven reliability
● Precision and tested quality
● Quick Quotes and Deliveries
Applications:
● IEEE small and medium distribution transformers
● IEC medium and large distribution transformers
● IEC small and medium power transformers
Technology parameters
Related Products
Related Knowledges
-
Impact of DC Bias in Transformers at Renewable Energy Stations Near UHVDC Grounding ElectrodesImpact of DC Bias in Transformers at Renewable Energy Stations Near UHVDC Grounding ElectrodesWhen the grounding electrode of an Ultra-High-Voltage Direct Current (UHVDC) transmission system is located close to a renewable energy power station, the return current flowing through the earth can cause a rise in ground potential around the electrode area. This ground potential rise leads to a shift in the neutral-point potential of nearby power transformers, inducing DC bias (or DC offset) in their01/15/2026 -
HECI GCB for Generators – Fast SF6 Circuit Breaker1.Definition and Function1.1 Role of the Generator Circuit BreakerThe Generator Circuit Breaker (GCB) is a controllable disconnect point located between the generator and the step-up transformer, serving as an interface between the generator and the power grid. Its primary functions include isolating generator-side faults and enabling operational control during generator synchronization and grid connection. The operating principle of a GCB is not significantly different from that of a standard c01/06/2026 -
Distribution Equipment Transformer Testing, Inspection, and Maintenance1.Transformer Maintenance and Inspection Open the low-voltage (LV) circuit breaker of the transformer under maintenance, remove the control power fuse, and hang a “Do Not Close” warning sign on the switch handle. Open the high-voltage (HV) circuit breaker of the transformer under maintenance, close the grounding switch, fully discharge the transformer, lock the HV switchgear, and hang a “Do Not Close” warning sign on the switch handle. For dry-type transformer maintenance: first clean the porcel12/25/2025 -
How to Test Insulation Resistance of Distribution TransformersIn practical work, insulation resistance of distribution transformers is generally measured twice: the insulation resistance between thehigh-voltage (HV) windingand thelow-voltage (LV) winding plus the transformer tank, and the insulation resistance between theLV windingand theHV winding plus the transformer tank.If both measurements yield acceptable values, it indicates that the insulation among the HV winding, LV winding, and transformer tank is qualified. If either measurement fails, pairwise12/25/2025 -
Design Principles for Pole-Mounted Distribution TransformersDesign Principles for Pole-Mounted Distribution Transformers(1) Location and Layout PrinciplesPole-mounted transformer platforms should be located near the load center or close to critical loads, following the principle of “small capacity, multiple locations” to facilitate equipment replacement and maintenance. For residential power supply, three-phase transformers may be installed nearby based on current demand and future growth projections.(2) Capacity Selection for Three-Phase Pole-Mounted Tr12/25/2025 -
Transformer Noise Control Solutions for Different Installations1.Noise Mitigation for Ground-Level Independent Transformer RoomsMitigation Strategy:First, conduct a power-off inspection and maintenance of the transformer, including replacing aged insulating oil, checking and tightening all fasteners, and cleaning dust from the unit.Second, reinforce the transformer foundation or install vibration isolation devices—such as rubber pads or spring isolators—selected based on the severity of vibration.Finally, strengthen sound insulation at weak points of the ro12/25/2025
