| Brand | Wone Store |
| Model NO. | Power Fuses |
| Rated voltage | 34.5kV |
| Mounting type | Upright Mounting |
| Rated interrupting current | 6.7kA |
| Series | SMD |
SMD Power Fuses provide reliable, economical protection for transformers and capacitor banks in outdoor substations through 138 kV. They incorporate precision-engineered nondamageable silver or nickel-chrome fusible elements with time-current characteristics that are precise and permanently accurate — assuring not only dependable performance, but also continued reliability of system coordination plans.
With SMD Power Fuses, source-side devices may be set for faster operation than practical with other power fuses or circuit breakers, thereby providing better system protection without compromising coordination.
features：
SMD Power Fuses are offered with maximum continuous current ratings through 300E amperes, in a variety of fault-interrupting ratings. They’re available in a wide range of ampere ratings, in three different speeds: Standard, Slow, and Very Slow. So they can be readily coordinated with protective relays, circuit reclosers, and other fuses. This broad selection of ampere ratings and speeds permits close fusing to achieve maximum protection and optimum coordination.
application:
Transf ormer Protect ion with SMD Power Fuses
High-voltage power fuses provide a reliable and economical means to protect small to midsize load transformers installed in utility and industrial substations. The considerable economies inherent in power-fuse protection are possible because the fuse itself is much less costly than other types of protective equipment. There also is no need for auxiliary equipment, such as station batteries, motor-driven operators, and protective relays.
Capacitor Bank Protect ion with SMD Power Fuses
SMD Power Fuses are suitable for fusing of station capacitor banks, particularly where available fault currents are high. These power fuses have a substantial continuous peak-load capability
that permits the use of smaller ampere ratings than may be possible with other makes of power fuses, without risking nuisance fuse operations caused by capacitor-bank inrush or outrush currents. Close fusing with SMD Power Fuses ensures rapid isolation of faulted capacitor banks, thereby protecting the system from unnecessary outages.
Technology parameters：
-
Automatic Closing Device for Low-Voltage Circuit Breakers Based on Time RelaysTo ensure safe and stable grid operation and prevent load current surges from damaging electrical equipment during power restoration, all loads connected to distribution transformers must be disconnected before energizing.Therefore, low-voltage circuit breakers are equipped with an undervoltage release function: when a transformer is de-energized due to maintenance or line faults, the loss of voltage on the low-voltage bus causes the branch circuit breaker to trip automatically. After the transfDyson09/16/2025 -
Understanding the Difference and Applications of On-Delay and Off-Delay Time RelaysIn electrical and electronic engineering, time relays are crucial control components. Operating on electromagnetic or mechanical principles, they delay the closing or opening of contacts within control circuits. This time-delayed action enables circuits to automatically perform specific operations after a set interval. Based on their timing characteristics, time relays are primarily classified into two types: on-delay and off-delay.1. On-Delay Time RelayAn on-delay time relay does not respond imEcho09/16/2025 -
Marine Time Relay Setting and Common Fault TroubleshootingCommon Faults and Troubleshooting:(1) Over time, the adjustable potentiometer used to set the delay time may suffer wear of the carbon film or accumulate dust, leading to inaccurate timing. To address this, apply a small amount of electrical contact cleaner around the potentiometer shaft, then rotate the shaft back and forth to clean the internal contacts. If the potentiometer is severely worn, replace it promptly.(2) Damage or aging of transistors can alter the parameters of the timing circuit,Felix Spark09/16/2025 -
Time relay applications & wiring methods for optimizing control circuits, improving accuracy and reliability in real-world systems.As an electrical component capable of achieving time-delay control, time relays are widely used in various circuit systems. Correctly understanding and mastering the wiring methods of time relays is essential for electrical engineers and electronics enthusiasts. This article presents detailed wiring diagrams to explain the applications and wiring methods of two common types—on-delay and off-delay time relays—in practical circuits.1. On-Delay Time Relay1. Wiring Diagram ExplanationA typical on-deEcho09/16/2025 -
Why Regular Transformer Maintenance Matters: 5 Serious Consequences of Neglecting ItI. Allowable TemperatureWhen a transformer is in operation, its windings and iron core generate copper loss and iron loss. These losses are converted into heat energy, causing the temperature of the transformer's iron core and windings to rise. If the temperature exceeds the allowable value for a long time, the insulation will gradually lose its mechanical elasticity and age.The temperature of each part of the transformer during operation is different: the winding temperature is the highest, folRockwell09/12/2025 -
How to Implement Condition-Based Maintenance for Power Transformers? A Complete 4-Step Process Analysis1. Definition of Condition-Based MaintenanceCondition-based maintenance refers to a maintenance method where decisions on whether and how to perform maintenance are determined based on the real-time operating status and health condition of equipment. It has no fixed maintenance methods or schedules. The prerequisite for condition-based maintenance is the establishment of equipment parameters and the comprehensive analysis of various operational information of the equipment, so as to make reasonaNoah09/12/2025
-
Dedicated Vacuum Contactor Solution for Port Shore Power SystemsI. Background and ChallengesShore power systems have become core technical equipment for ports to reduce carbon emissions and noise pollution. However, these systems face two major challenges in the harsh operational environment of ports:Severe Environmental Corrosion: High humidity and salt spray in port areas cause serious corrosion to metal components and enclosures of electrical equipment, significantly impacting electrical lifespan and operational reliability.High Switching Requirements:Wone Store09/13/2025 -
ABB Vacuum Contactor KC2 Power Supply System Technical Transformation PlanIssue OverviewThe 10kV air compressor starting system of a company utilizes the ABB vacuum contactor KC2 as the control component for the operating circuit. The dedicated wide-voltage power supply module paired with this contactor presents the following issues:Frequent failures: The power supply module fails to properly transition the voltage from 300V to 12V, resulting in fuse blowouts.Poor heat dissipation: Enclosed installation of the module leads to insufficient heat dissipation, accelerWone Store09/13/2025 -
Solution for Medium-Voltage Motor Control and Protection Using Vacuum Contactor-Fuse (VCF) in a Coal Conveying SystemProject BackgroundA coal conveying system comprises 15 belt conveyors driven by medium-voltage motors. The system operates under complex conditions, with motors often subjected to heavy loads and frequent starts. To address these challenges and achieve effective control and reliable protection during motor startup, the project comprehensively adopts Vacuum Contactor-Fuse (VCF) combination devices for the 6kV medium-voltage motor power distribution. This solution details the technical features,Wone Store09/13/2025
