Pluggable Communication Module Three-Phase YTL Energy Meter Device
Key attributes
| Brand | Wone |
| Model NO. | Pluggable Communication Module Three-Phase YTL Energy Meter Device |
| Rated voltage | 3x120/208V |
| Rated normal current | 0.25-5(100)A |
| Series | D523090 |
Product descriptions from the supplier
Description
Anti-tampering
Support bypass detection, open cover detection, influence of external magnetic field, abnormal voltage record, live&neutral double circuit metering etc, totally 21 tampering situation detection.Two relays on phase wire&Neutral wire.
Tariff
Divide into weekday timetable and weekend timetable, with 10 time period and 10 tariffs. Every timetable has a backup table for remote updating of backup timetable and configure the switching time. Meter will automatically switch the tariff table at the switching time.
Event
Open cover, magnetic field, load ground connection, reserve current, over-voltage, low-voltage, low-frequency, overload,power-fail, low remaining power, and token record etc. Support 100 events。
Measurement
Meter measures voltage, current, active power, reactive power, frequency, power factor, MD in the current month, MD of last 1month, MD of last 2 month, the absolute value of total active energy, the absolute value of total active tariff energy, total input energy of the current month, total input energy of last 12 month, total output energy of the current month, total output energy of last 12 month, and total reactive energy.
Mode
Meter has 3 operation modes: STS token mode, currency prepaid mode and post-paid (traditional) mode, which can be switched. And the currency mode can be divided into tariff mode and step price mode. Modes can be configured through communication.
Specifications
| Main |
|
|---|---|
| Range | D523090 |
| Product or Componet Type | Smart Energy Meter |
| Country of origin | China |
| Complementary |
|
|---|---|
| Phase | Single Phase |
| Type of measurement | AC |
| Metering type | Measurement |
| Device Application | Solar Power Energy Charge |
| Accuracy class | Active power 1.0 Reactive power 2.0 |
| Rated Current | 0,5-5(30)A,0,5-5(32)A,0,5-5(40)A,0,5-5(45)A, 0,5-5(50)A,0,5-5(60)A, 0,5-5(80)A |
| Rated Voltage | 230V |
| Network Frequency | 50-60Hz |
| Technology Type | Electronic |
| Display Type | LCD display(LCD5+1) |
| Impulse Constant | 6400imp/kWh 6400imp/kvarh |
| Maximum value measured | 99999.99kWh |
| Tariff input | 10 |
| Communication port protocol | Modbus/GPRS/RF/G3PLC |
| Communication port support | RS485 /GPRS/RF/G3PLC |
| Local signalling | ------ |
| Number of inputs | ------- |
| Number of Outputs | -------------- |
| Output voltage | 230V |
| Mounting Mode | suspension Mounting |
| Mounting Support | ----- |
| Connections - terminals | ------- |
| Standards | IEC62052-11 IEC62053-21 IEC62053-31 IEC 62056-21 : DLMS/COSEM |
| Environment |
|
|---|---|
| IP degree of protection | IP54 outdoor, meter can work under 70 degree |
| Relative humidity | 5…95 % 97 °F (36 °C) |
| Ambient air temperature for operation | -40…70 °C |
| Ambient Air Temperature for Storage | --40…70 °C |
| Operating altitude | 4000 m |
| Dimensions | 110mm*37mm*65mm |
| Packing Units |
|
|---|---|
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 65mm |
| Package 1 Width | 37mm |
| Package 1 Length | 110mm |
| Package 1 Weight | 1.000kg |
Dimensions
Related Products
-
Din-Rail 1P 1 Wire active measurment MID Certified pulse Energy Meter
-
Single Phase Din Rail Electric Meter Mini Digital Wholesale kWh
-
Din Rail Electricity Meter Single Phase Company with LCD Display
-
Single Phase Smart Prepayment Meter
-
Single-phase Smart Energy Meter
-
Three-phase Keypad Smart Energy Meter
-
Three-phase Keypad Prepayment Energy Meter GST7666
Related Knowledges
-
Faults and Handling of Single-phase Grounding in 10kV Distribution LinesCharacteristics and Detection Devices for Single-Phase Ground Faults1. Characteristics of Single-Phase Ground FaultsCentral Alarm Signals:The warning bell rings, and the indicator lamp labeled “Ground Fault on [X] kV Bus Section [Y]” illuminates. In systems with a Petersen coil (arc suppression coil) grounding the neutral point, the “Petersen Coil Operated” indicator also lights up.Insulation Monitoring Voltmeter Indications:The voltage of the faulted phase decreases (in01/30/2026 -
Neutral point grounding operation mode for 110kV～220kV power grid transformersThe arrangement of neutral point grounding operation modes for 110kV～220kV power grid transformers shall meet the insulation withstand requirements of transformer neutral points, and shall also strive to keep the zero-sequence impedance of substations basically unchanged, while ensuring that the zero-sequence comprehensive impedance at any short-circuit point in the system does not exceed three times the positive-sequence comprehensive impedance.For 220kV and 110kV transformers in new constructi01/29/2026 -
Why Do Substations Use Stones, Gravel, Pebbles, and Crushed Rock?Why Do Substations Use Stones, Gravel, Pebbles, and Crushed Rock?In substations, equipment such as power and distribution transformers, transmission lines, voltage transformers, current transformers, and disconnect switches all require grounding. Beyond grounding, we will now explore in depth why gravel and crushed stone are commonly used in substations. Though they appear ordinary, these stones play a critical safety and functional role.In substation grounding design—especially when multiple gr01/29/2026 -
Why Must a Transformer Core Be Grounded at Only One Point? Isn't Multi-Point Grounding More Reliable?Why Does the Transformer Core Need to Be Grounded?During operation, the transformer core, along with the metal structures, parts, and components that fix the core and windings, are all situated in a strong electric field. Under the influence of this electric field, they acquire a relatively high potential with respect to ground. If the core is not grounded, a potential difference will exist between the core and the grounded clamping structures and tank, which may lead to intermittent discharge.I01/29/2026 -
Understanding Transformer Neutral GroundingI. What is a Neutral Point?In transformers and generators, the neutral point is a specific point in the winding where the absolute voltage between this point and each external terminal is equal. In the diagram below, pointOrepresents the neutral point.II. Why Does the Neutral Point Need Grounding?The electrical connection method between the neutral point and earth in a three-phase AC power system is called theneutral grounding method. This grounding method directly affects:The safety, reliabilit01/29/2026 -
What’s the Difference Between Rectifier Transformers and Power Transformers?What is a Rectifier Transformer?"Power conversion" is a general term encompassing rectification, inversion, and frequency conversion, with rectification being the most widely used among them. Rectifier equipment converts input AC power into DC output through rectification and filtering. A rectifier transformer serves as the power supply transformer for such rectifier equipment. In industrial applications, most DC power supplies are obtained by combining a rectifier transformer with rectifier equ01/29/2026
