DNH41 Automatic Transfer Switch 10-80A ATS
Key attributes
| Brand | Switchgear parts |
| Model NO. | DNH41 Automatic Transfer Switch 10-80A ATS |
| Rated normal current | 10-80A |
| Series | DNH41 |
Product descriptions from the supplier
The DNH41 Automatic Transfer Switch (ATS) is designed to ensure a seamless transition between two power sources, providing a reliable and uninterrupted power supply. Operating at a rated insulation voltage of AC500V and working voltage of AC230V, this switch is ideal for switching between mains power and generator circuits in residential, commercial, and industrial applications.
The specific compatible cabinet models are as follows: XL-21 power distribution cabinet, GGD low-voltage distribution cabinet, MNS low-voltage withdrawable switchgear, XM series lighting distribution box, and other low-voltage complete sets of distribution and control cabinets
Compliant with international standards such as IEC 60947-3 and IEC 60947-11, the DNH41 ATS guarantees safe, efficient, and automatic power switching with real-time monitoring capabilities.
Key Advantages & Selling Points
Automatic & Fast Power Switching – Transfers power within 3 seconds in case of mains failure and switches back to mains power after a pre-set delay (1-30s adjustable).
Real-Time Monitoring – Displays voltage and current in real-time, providing users with accurate power status updates.
Overload Protection with Adjustable Alarm – Supports adjustable current settings from 10A to 80A with an overload alarm function to enhance system protection.
Compact DIN Rail Installation – Designed for 35mm DIN rail mounting, making installation quick and hassle-free.
High Electrical Endurance – Built with a rated impulse withstand voltage of 1.5kV, ensuring long-term durability and safety in demanding environments.
LED Status Indicators – Features intuitive LED indicators for easy status identification:
Mains Power (Blue)
Generator Power (Blue)
Load Active (Green)
Fault Detection (Red)
Wide Operating Conditions – Works efficiently in temperatures ranging from -5°C to +55°C, making it suitable for various environmental conditions.
| Specification | Details |
| Rated Operational Voltage | AC230V |
| Rated Insulation Voltage | AC500V |
| Rated Frequency | 50Hz/60Hz |
| Frame Rated Current | 10-80A (Adjustable) |
| Power Consumption | 4.5VA, AC230V |
| Rated Impulse Withstand Voltage | 1.5kV |
| Dielectric Strength | 2kV |
| Switching Time (Main to Backup) | 3s |
| Switching Time (Backup to Main) | 1-30s (Adjustable) |
| Mounting Type | DIN Rail (35×7.5mm) |
| Protection Level | IP20 |
| Operating Temperature | -5°C to +55°C |
| Pollution Degree | 2 |
| Wiring Capacity | 16-25mm² |
Related Products
-
160-250A DNH40 Series Disconnector Switch
-
315-400A DNH40 Series Disconnector Switch
-
3200-4000A DNH40 series isolator switches
-
2000-2500A DNH40 Series Disconnector Switch
-
630-800A DNH40 Series Disconnector Switch
-
HH15 series Disconnector fuse group and disconnector
-
Disconnector Fuse Group HGLR Series, Fuse Switch Disconnector
Related Knowledges
-
Impact of DC Bias in Transformers at Renewable Energy Stations Near UHVDC Grounding ElectrodesImpact of DC Bias in Transformers at Renewable Energy Stations Near UHVDC Grounding ElectrodesWhen the grounding electrode of an Ultra-High-Voltage Direct Current (UHVDC) transmission system is located close to a renewable energy power station, the return current flowing through the earth can cause a rise in ground potential around the electrode area. This ground potential rise leads to a shift in the neutral-point potential of nearby power transformers, inducing DC bias (or DC offset) in their01/15/2026 -
HECI GCB for Generators – Fast SF6 Circuit Breaker1.Definition and Function1.1 Role of the Generator Circuit BreakerThe Generator Circuit Breaker (GCB) is a controllable disconnect point located between the generator and the step-up transformer, serving as an interface between the generator and the power grid. Its primary functions include isolating generator-side faults and enabling operational control during generator synchronization and grid connection. The operating principle of a GCB is not significantly different from that of a standard c01/06/2026 -
Distribution Equipment Transformer Testing, Inspection, and Maintenance1.Transformer Maintenance and Inspection Open the low-voltage (LV) circuit breaker of the transformer under maintenance, remove the control power fuse, and hang a “Do Not Close” warning sign on the switch handle. Open the high-voltage (HV) circuit breaker of the transformer under maintenance, close the grounding switch, fully discharge the transformer, lock the HV switchgear, and hang a “Do Not Close” warning sign on the switch handle. For dry-type transformer maintenance: first clean the porcel12/25/2025 -
How to Test Insulation Resistance of Distribution TransformersIn practical work, insulation resistance of distribution transformers is generally measured twice: the insulation resistance between thehigh-voltage (HV) windingand thelow-voltage (LV) winding plus the transformer tank, and the insulation resistance between theLV windingand theHV winding plus the transformer tank.If both measurements yield acceptable values, it indicates that the insulation among the HV winding, LV winding, and transformer tank is qualified. If either measurement fails, pairwise12/25/2025 -
Design Principles for Pole-Mounted Distribution TransformersDesign Principles for Pole-Mounted Distribution Transformers(1) Location and Layout PrinciplesPole-mounted transformer platforms should be located near the load center or close to critical loads, following the principle of “small capacity, multiple locations” to facilitate equipment replacement and maintenance. For residential power supply, three-phase transformers may be installed nearby based on current demand and future growth projections.(2) Capacity Selection for Three-Phase Pole-Mounted Tr12/25/2025 -
Transformer Noise Control Solutions for Different Installations1.Noise Mitigation for Ground-Level Independent Transformer RoomsMitigation Strategy:First, conduct a power-off inspection and maintenance of the transformer, including replacing aged insulating oil, checking and tightening all fasteners, and cleaning dust from the unit.Second, reinforce the transformer foundation or install vibration isolation devices—such as rubber pads or spring isolators—selected based on the severity of vibration.Finally, strengthen sound insulation at weak points of the ro12/25/2025
