| Marca | MV Switchgear Accessories |
| Numerus Modeli | BSMJ Self-healing low voltage shunt capacitor Capacitor BSMJ self-sanans autem in parvam tensionem et adhibetur in circuitu parallelum |
| Votum nominatum | 0.25Kv |
| Frequenta nominata | 50/60Hz |
| Series | BSMJ |
Applicatio
Self healing low voltage shunt power capacitor was used in 50Hz and 60Hz power system, it mainly improves power factor, reduce reactive power loss, improve voltage quality. Encavate transformer quantity and so on. It is best saving power products which company strong recommend and work
This product meets the standard: GB/T 12747-2004, IEC60831-1996
Main Technical Date
请注意，目标语种【la】指的是拉丁文。但是，电力科技领域的专业术语在现代拉丁文中没有直接对应的词汇，因此这段文本无法直接翻译成拉丁文。根据您的要求，我将尽量使用接近的拉丁文表述，但请注意这可能不完全准确或符合行业标准。Applicatio
Self healing low voltage shunt power capacitor usus est in systema electrica 50Hz et 60Hz, praecipue meliorat factorem potentiae, minuit perditionem potentiae reactivae, meliorat qualitatem tensionis. Minuit quantitatem transformatorum et sic. Hoc est optimus productus conservationis potentiae quod firma valde commendat et operatur
Hoc productum normas compleri: GB/T 12747-2004, IEC60831-1996
Principales Data Technicae
| Model | Rated Volt. (KV) | Rated Capacity (Kvar) | Rated Capacity (μF) | Rated Current (A) |
|---|---|---|---|---|
| 0.18-10-1 | 0.18 | 10 | 983.0 | 55.6 |
| 0.18-15-1 | 0.18 | 15 | 1475.0 | 83.3 |
| 0.18-20-1 | 0.18 | 20 | 1966.0 | 111.0 |
| 0.18-25-1 | 0.18 | 25 | 2458.0 | 139.0 |
| 0.25-5-1 | 0.25 | 5 | 255.0 | 20 |
| 0.25-7.5-1 | 0.25 | 7.5 | 382.0 | 30 |
| 0.25-10-1 | 0.25 | 10 | 510.0 | 40 |
| 0.25-15-1 | 0.25 | 15 | 764.0 | 60 |
| 0.25-20-1 | 0.25 | 20 | 1019.0 | 80 |
| 0.25-25-1 | 0.25 | 25 | 1274.0 | 100 |
| 0.25-30-1 | 0.25 | 30 | 1529.0 | 120 |
| 0.4-10-1 | 0.4 | 10 | 198.9 | 25 |
| 0.4-12-1 | 0.4 | 12 | 238.7 | 30 |
| 0.4-15-1 | 0.4 | 15 | 298.4 | 37.5 |
| 0.4-16-1 | 0.4 | 16 | 318.3 | 40 |
| 0.4-18-1 | 0.4 | 18 | 358.1 | 45.0 |
| 0.4-20-1 | 0.4 | 20 | 397.9 | 50 |
| 0.4-25-1 | 0.4 | 25 | 497.4 | 62.5 |
| 0.4-30-1 | 0.4 | 30 | 596.8 | 75 |
| 0.4-35-1 | 0.4 | 35 | 696.3 | 87.5 |
| 0.4-40-1 | 0.4 | 40 | 796.2 | 100 |
| 0.4-45-1 | 0.4 | 45 | 895.2 | 112.5 |
| 0.4-50-1 | 0.4 | 50 | 995.2 | 125 |
| 0.4-60-1 | 0.4 | 60 | 1194.3 | 150 |
| 0.45-10-1 | 0.45 | 10 | 157.2 | 22.2 |
| 0.45-12-1 | 0.45 | 12 | 188.6 | 26.7 |
| 0.45-15-1 | 0.45 | 15 | 235.8 | 33.3 |
| 0.45-16-1 | 0.45 | 16 | 251.5 | 35.6 |
| 0.45-18-1 | 0.45 | 18 | 282.9 | 40 |
| 0.45-20-1 | 0.45 | 20 | 314.4 | 44.4 |
| 0.45-25-1 | 0.45 | 25 | 393.2 | 55.6 |
| 0.45-30-1 | 0.45 | 30 | 471.8 | 66.7 |
| 0.45-35-1 | 0.45 | 35 | 550.2 | 77.8 |
| 0.45-40-1 | 0.45 | 40 | 629.1 | 88.9 |
| 0.45-45-1 | 0.45 | 45 | 707.4 | 100.0 |
| 0.45-50-1 | 0.45 | 50 | 786.3 | 111.1 |
| 0.45-60-1 | 0.45 | 60 | 943.6 | 133.3 |
| Model | H(mm) | terminal | Drawing No. |
|---|---|---|---|
| 0.18-10-1 | 220 | M6 | 2 |
| 0.18-15-1 | 220 | M8 | 3 |
| 0.18-20-1 | 220 | M8 | 3 |
| 0.18-25-1 | 290 | M8×2 | 3 |
| 0.25-5-1 | 130 | M6 | 1 |
| 0.25-7.5-1 | 180 | M8 | 1 |
| 0.25-10-1 | 210 | M8 | 1 |
| 0.25-15-1 | 260 | M8 | 2 |
| 0.25-20-1 | 330 | M10 | 2 |
| 0.25-25-1 | 345 | M10 | 2 |
| 0.25-30-1 | 220 | 2×M10 | 3 |
| 0.4-10-1 | 180 | M6 | 2 |
| 0.4-12-1 | 180 | M6 | 2 |
| 0.4-15-1 | 210 | M8 | 2 |
| 0.4-16-1 | 210 | M8 | 2 |
| 0.4-18-1 | 245 | M8 | 2 |
| 0.4-20-1 | 245 | M8 | 2 |
| 0.4-25-1 | 210 | M8 | 2 |
| 0.4-30-1 | 260 | M8 | 2 |
| 0.4-35-1 | 260 | M8 | 2 |
| 0.4-40-1 | 330 | M10 | 2 |
| 0.4-45-1 | 220 | 2×M10 | 2 |
| 0.4-50-1 | 220 | 2×M10 | 2 |
| 0.4-60-1 | 220 | 2×M10 | 2 |
| 0.45-10-1 | 180 | M6 | 2 |
| 0.45-12-1 | 180 | M6 | 2 |
| 0.45-15-1 | 210 | M8 | 2 |
| 0.45-16-1 | 210 | M8 | 2 |
| 0.45-18-1 | 210 | M8 | 2 |
| 0.45-20-1 | 210 | M8 | 2 |
| 0.45-25-1 | 210 | M8 | 2 |
| 0.45-30-1 | 210 | M8 | 2 |
| 0.45-35-1 | 260 | M10 | 2 |
| 0.45-40-1 | 260 | M10 | 2 |
| 0.45-45-1 | 220 | M10 | 3 |
| 0.45-50-1 | 220 | 2×M10 | 3 |
| 0.45-60-1 | 220 | 2×M10 | 3 |
Nota: Aliae species specialis ad mensuram supplyuntur secundum desideria usus
