• Product
  • Suppliers
  • Manufacturers
  • Solutions
  • Free tools
  • Knowledges
  • Experts
  • Communities
Search


17.5kV SF6 GIS for Secondary Distribution / Ring Main Unit

  • 17.5kV SF6 GIS for Secondary Distribution / Ring Main Unit
  • 17.5kV SF6 GIS for Secondary Distribution / Ring Main Unit

Key attributes

Brand ROCKWILL
Model NO. 17.5kV SF6 GIS for Secondary Distribution / Ring Main Unit
Rated voltage 17.5kV
Rated frequency 50/60Hz
Series RMR

Product descriptions from the supplier

Description

Introduction
Main Technical Parameter
RMR-17.5 series switchgear is a kind of modular fully insulated fully sealed ring network switchgear for medium voltage distribution network, RMR-17.5 series switchgear can be used indoors, outdoors, when used indoors,most of the composition of indoor opening and closing stations, can be installed after leaving the factory, without any special tools, switchgear inflatable compartment protection level up to IP67. When used outdoors,the box protection level is generally IP54, mainly used for medium voltage distribution network, the equipment is not affected by high altitude,condensation, pollution, small animals and chemical substances and other external environmental influences, small size, maintenance-free, widely used in urban commercial centers, industrial concentration areas, airports,highways and other distribution network systems, it is not only conducive to the flexible application of line ring network, but also can be designed as dual power supply self-invested power supply to ensure power supply reliability.Before shipment, all of our unit modules are factory tested.

Product technical characteristics

  • RMR-17.5 series switchgear operates under normal indoor conditions:

  • Maximum temperature: +75° C

  • Minimum temperature: -40° C

  • 24-hour average maximum temperature: +35° C

  • Humidity: Maximum average relative humidity (2 4-hour measurement) 95%;

  • Maximum average relative humidity (1 month measurement) 90%

  • In the case of installation without reducing the gas pressure: the maximum altitude is 1500 m

RMR-17.5 series switchgear applications in outdoor operation:

  • Altitude:≤4000m

  • Ambient temperature: maximum temperature: +50 ° C; The average temperature within 24h does not exceed +35 ° C

  • Ambient humidity: 24h relative humidity average does not exceed 95%; The average monthly relative humidity does not exceed 90%

  • Installation environment: the surrounding air is free of explosive and corrosive gases, and there is no violent vibration in the installation site Impact, pollution level does not exceed THE III. level in GB/T5582;

  • Ground acceleration caused by earthquakes: below the horizontal direction. 3g; Vertically below. 15g

Main Technical Parameter

Item

Unit

Load switch unit

Circuit breaker unit

Rated Voltage

kV

17.5

17.5

Rated frequency

Hz

60

60

Rated current

A

400

400

Power frequency withstand voltage (phase-to-phase and relatively)

kV

38

38

Power frequency withstand voltage (between fractures)

kV

45

45

Power frequency withstand voltage (control and auxiliary loops)

kV

2

2

Lightning shock withstand voltage (phase-to-phase and relatively)

kA

95/110

95/110

Rated for short-term withstand current

kA/s

21/1s

21/1s

Rated peak withstand current

kA

54.6

54.6

Rated short-circuit closing current

kA

54.6

54.6

Rated short-circuit breaking current

kA

/

21

Rated transfer current

A

/

/

Rated active load breaking current

A

400

/

Rated closed-loop current

A

400

/

Mechanical life: load switch/circuit breaker

-

5000

10000

Mechanical life: isolation/grounding switch

-

1000

1000

Inflation pressure: Rated inflation pressure (G/C at 20°C)

Mpa

0.04

0.04

Gas leakage rate

%

≤ 0.01

≤ 0.01


Documentation Resource Library
Restricted
SEC SPECIFICATIONS FOR 11-33kV MV SPECIAL USE SMART RMU
Other
English
Consulting
Consulting
Know your supplier
Online store
On-time delivery rate
Response time
100.0%
≤4h
Company overview
Workplace: 108000m²m² Total staff: 700+ Highest Annual Export(usD): 150000000
Workplace: 108000m²m²
Total staff: 700+
Highest Annual Export(usD): 150000000
Services
Business Type: Design/Manufacture/Sales
Main Categories: High Voltage Electrical Apparatus/Electric transformer
Whole life care manager
Whole-life care management services for equipment procurement, use, maintenance, and after-sales, ensuring safe operation of electrical equipment, continuous control, and worry-free electricity consumption.
The equipment supplier has passed platform qualification certification and technical evaluation, ensuring compliance, professionalism, and reliability from the source.

Related Products

Related Knowledges

  • Comparative Analysis of High-Voltage Load Switch Technologies
    A load switch is a type of switching device positioned between circuit breakers and disconnectors. It features a simple arc extinguishing device capable of interrupting rated load current and certain overload currents, but cannot interrupt short-circuit currents. Load switches can be classified into high-voltage and low-voltage types according to their operating voltage.Solid gas-producing high-voltage load switch: This type utilizes the energy from the breaking arc itself to cause gas-producing
    12/15/2025
  • Analysis of Faults and Solutions for 17.5kV Ring Main Units in Distribution Networks
    With the improvement of social productivity and people's quality of life, the demand for electricity is continuously increasing. To ensure the effectiveness of power grid system configuration, it is necessary to reasonably construct distribution networks based on actual conditions. However, during the operation of distribution network systems, 17.5kV ring main units play a very important role, so the impact caused by failures is extremely significant. At this point, it is essential to adopt reas
    12/11/2025
  • How to install a DTU on an N2 Insulation ring main unit?
    DTU (Distribution Terminal Unit), a substation terminal in distribution automation systems, is secondary equipment installed in switching stations, distribution rooms, N2 Insulation ring main units (RMUs), and box-type substations. It bridges primary equipment and the distribution automation master station. Older N2 Insulation RMUs without DTUs cannot communicate with the master station, failing to meet automation requirements. While replacing entire RMUs with new DTU-integrated models would sol
    12/11/2025
  • Design of a New 12kV Environmentally Friendly Gas-Insulated Ring Main Unit
    1. Specific Design1.1 Design ConceptState Grid Corporation of China actively promotes grid energy conservation and low-carbon development to achieve national carbon peak (2030) and neutrality (2060) goals. Environmentally friendly gas-insulated ring main units represent this trend. A new 12kV integrated environmentally friendly gas-insulated ring main unit was designed combining vacuum interrupter technology with three-position disconnectors and vacuum circuit breakers. The design utilized Solid
    12/11/2025
  • Integrated Intelligent Ring Main Units in 10kV Distribution Automation
    In the rational application of intelligent technologies, the integrated intelligent ring main unit in 10kV distribution automation construction is more conducive to improving the construction level of 10kV distribution automation and ensuring the stability of 10kV distribution automation construction.1 Research Background Integrated intelligent ring main unit.(1) The integrated intelligent ring main unit adopts more advanced technologies, including but not limited to network technology, communic
    12/10/2025
  • 35kV RMU Busbar Failure Due to Installation Errors Analysis
    This article introduces a case of 35kV ring main unit busbar insulation breakdown failure, analyzes the failure causes and proposes solutions [3], providing reference for the construction and operation of new energy power stations.1 Accident OverviewOn March 17, 2023, a photovoltaic desertification control project site reported a ground fault trip accident in the 35kV ring main unit [4]. The equipment manufacturer arranged a team of technical experts to rush to the site to investigate the cause
    12/10/2025

Related Solutions

  • Analysis of Common Problems in 10kV Gas-Insulated Ring Main Units (RMUs)
    Introduction:10kV gas-insulated RMUs are widely used due to their numerous advantages, such as being fully enclosed, possessing high insulation performance, requiring no maintenance, having a compact size, and offering flexible and convenient installation. At this stage, they have gradually become a critical node in urban distribution network ring-main power supply and play a significant role in the power distribution system. Problems within gas-insulated RMUs can severely impact the entire dist
    08/16/2025
  • Application of Intelligent Solid Insulated Ring Main Units (SIRMUs) in the Qinzhou Distribution Network
    1 IntroductionCoastal regions face environmental challenges including heavy rainfall, lightning, high temperatures, high humidity, and high salt spray corrosion. To ensure the safety of urban distribution grids in such environments, minimize power outages caused by equipment maintenance, and prevent accidents due to equipment end-of-life and other factors affecting grid security, we have researched the use of a new type of Solid Insulated Ring Main Unit (SIRMU). This SIRMU offers long lifespan,
    08/15/2025
  • SF₆ Ring Main Units (RMUs) and Urban Grid Renovation
    Overview​Older distribution networks are primarily radial in structure, with most incoming and outgoing lines being overhead lines. The switching equipment typically consists of air-insulated vacuum circuit breakers or minimal-oil circuit breakers. These networks suffer from frequent faults, high operating costs, and prolonged, widespread power outages in the event of a failure, significantly hindering economic development.With rapid economic growth and the implementation of urban grid renovatio
    08/13/2025
Haven't found the right supplier yet? Let matching verified suppliers find you. Get Quotation Now
Haven't found the right supplier yet? Let matching verified suppliers find you.
Get Quotation Now
Send inquiry
+86
Click to upload file
Download
Get the IEE Business Application
Use the IEE-Business app to find equipment, obtain solutions, connect with experts, and participate in industry collaboration anytime, anywhere—fully supporting the development of your power projects and business.