12kV Indoor compressed load break switch
Key attributes
| Brand | ROCKWILL |
| Model NO. | 12kV Indoor compressed load break switch |
| Rated voltage | 12kV |
| Rated normal current | 630A |
| Rated frequency | 50/60Hz |
| Series | FKN |
Product descriptions from the supplier
Product Overview
The FKN12 - 12D pneumatic load break switch (hereinafter referred to as the load break switch) is an indoor high - voltage switching device for three - phase AC 12kV, 50/60Hz. Under normal circuit conditions, it can close, carry and open load current; it can close short - circuit current and has the ability to carry short - circuit current within a specified time. After the load break switch is equipped with a current - limiting fuse with an impactor, it becomes a load break switch - fuse combined electrical appliance (hereinafter referred to as the combined electrical appliance), which can be used for overload and short - circuit protection of loads (such as power transformers).
This product is suitable for installation in ring main unit switch cabinets, box - type substations and other types of switch cabinets. It is an ideal equipment for the construction, transformation and renewal of current distribution networks, transformation and distribution substations and switch stations.
Key Features
Current Handling Capability：Under normal operation, it can smoothly close, carry, and interrupt load current; in the event of a short - circuit fault, it is capable of closing short - circuit current and carrying short - circuit current within the specified time, ensuring short - term stability of the power grid during faults and gaining time for fault elimination.
Combined Protection Feature：When combined with a current - limiting fuse with an impactor, it forms a load break switch - fuse combination electrical appliance, providing overload and short - circuit protection for loads such as power transformers. This simplifies the system protection configuration and enhances the timeliness and effectiveness of protection.
Compact Structure：Based on the pneumatic arc - extinguishing principle, the overall structure is exquisitely designed with a small footprint, suitable for installation in indoor switchgear with limited space.
Flexible Installation：It has strong compatibility with various types of switchgear such as ring main unit switchgear and box - type substations. It can be conveniently installed in both new construction and renovation projects, reducing construction difficulty and costs.
Technical Parameters
Mechanical Characteristics
Operating Environmental Conditions
Altitude: Not exceeding 1000m;
Ambient Temperature: Maximum +40°C, Minimum -25°C;
Relative Humidity: Daily average not exceeding 95%, Monthly average not exceeding 90%;
Seismic Intensity: Below 8 degrees;
This switch should be installed in places free from fire, explosion hazards, severe pollution, chemical corrosion, and violent vibration.
Related Products
Related Knowledges
-
Impact of DC Bias in Transformers at Renewable Energy Stations Near UHVDC Grounding ElectrodesImpact of DC Bias in Transformers at Renewable Energy Stations Near UHVDC Grounding ElectrodesWhen the grounding electrode of an Ultra-High-Voltage Direct Current (UHVDC) transmission system is located close to a renewable energy power station, the return current flowing through the earth can cause a rise in ground potential around the electrode area. This ground potential rise leads to a shift in the neutral-point potential of nearby power transformers, inducing DC bias (or DC offset) in their01/15/2026 -
HECI GCB for Generators – Fast SF6 Circuit Breaker1.Definition and Function1.1 Role of the Generator Circuit BreakerThe Generator Circuit Breaker (GCB) is a controllable disconnect point located between the generator and the step-up transformer, serving as an interface between the generator and the power grid. Its primary functions include isolating generator-side faults and enabling operational control during generator synchronization and grid connection. The operating principle of a GCB is not significantly different from that of a standard c01/06/2026 -
Distribution Equipment Transformer Testing, Inspection, and Maintenance1.Transformer Maintenance and Inspection Open the low-voltage (LV) circuit breaker of the transformer under maintenance, remove the control power fuse, and hang a “Do Not Close” warning sign on the switch handle. Open the high-voltage (HV) circuit breaker of the transformer under maintenance, close the grounding switch, fully discharge the transformer, lock the HV switchgear, and hang a “Do Not Close” warning sign on the switch handle. For dry-type transformer maintenance: first clean the porcel12/25/2025 -
How to Test Insulation Resistance of Distribution TransformersIn practical work, insulation resistance of distribution transformers is generally measured twice: the insulation resistance between thehigh-voltage (HV) windingand thelow-voltage (LV) winding plus the transformer tank, and the insulation resistance between theLV windingand theHV winding plus the transformer tank.If both measurements yield acceptable values, it indicates that the insulation among the HV winding, LV winding, and transformer tank is qualified. If either measurement fails, pairwise12/25/2025 -
Design Principles for Pole-Mounted Distribution TransformersDesign Principles for Pole-Mounted Distribution Transformers(1) Location and Layout PrinciplesPole-mounted transformer platforms should be located near the load center or close to critical loads, following the principle of “small capacity, multiple locations” to facilitate equipment replacement and maintenance. For residential power supply, three-phase transformers may be installed nearby based on current demand and future growth projections.(2) Capacity Selection for Three-Phase Pole-Mounted Tr12/25/2025 -
Transformer Noise Control Solutions for Different Installations1.Noise Mitigation for Ground-Level Independent Transformer RoomsMitigation Strategy:First, conduct a power-off inspection and maintenance of the transformer, including replacing aged insulating oil, checking and tightening all fasteners, and cleaning dust from the unit.Second, reinforce the transformer foundation or install vibration isolation devices—such as rubber pads or spring isolators—selected based on the severity of vibration.Finally, strengthen sound insulation at weak points of the ro12/25/2025
Related Solutions
-
Intelligent Operation Solution for 12kV Vacuum Circuit Breakers: Integrating Real-time Monitoring & Lifetime OptimizationⅠ. Equipment Operation & MaintenanceIntelligent Monitoring System IntegrationMulti-parameter Real-time Monitoring: Embedded sensors (temperature, displacement, Hall effect current sensors) track contact temperature rise, mechanical characteristics (opening/closing speed, overtravel), coil current, and partial discharge signals. Data undergoes preprocessing via edge computing prior to cloud upload.Lifetime Prediction Model: Dynamically evaluates remaining lifespan using electrical wear data06/10/2025 -
SF6 Circuit Breaker Solutions for Outdoor Installation (Anti-Pollution & Seismic Resistance)I.Core Challenges in Outdoor InstallationIn high-voltage transmission and distribution systems, SF6 circuit breakers are exposed to complex outdoor environments for extended periods, facing the following critical issues:Pollution & Insulation DegradationDust, salt fog, and industrial pollutants in outdoor environments easily adhere to equipment surfaces. In coastal or industrial areas, pollution levels may reach Class IV, resulting in insufficient creepage distance and triggering flasho05/12/2025 -
12kV Indoor Vacuum Circuit Breaker Southeast Asia Solution: Anti-Corrosion Compact Design12kV Indoor Vacuum Circuit Breaker Southeast Asia Solution: Anti-Corrosion Compact DesignⅠ. Executive SummarySoutheast Asia faces rapidly growing electricity demand alongside environmental challenges including high temperatures, humidity, salt spray corrosion, and grid instability. This solution recommends Solid Insulated Pole-Mounted Vacuum Circuit Breakers (VCB) featuring high reliability, compact design, and smart monitoring. Tailored for tropical climates and industrial scenarios, it06/10/2025
