English
RFQ

Download the app

Requirements for enclosure partitioning in GIS design according to IEC standard

04/15/2025

The partitioning of a Gas - Insulated Switchgear (GIS) is significantly influenced by the service continuity requirements during maintenance, repair, and extension activities. Additionally, local health and safety regulations must be taken into account.

GIS should be divided into compartments in a way that:

During various operations that necessitate the de - energization of certain parts of the GIS, such as maintenance, repair, and extension, the compartments taken out of service adhere to the user's service continuity requirements.
The impact of an internal arc within a compartment is restricted to that specific compartment only.
In the event of a major failure, the duration of unavailability aligns with the user's service continuity requirements.
Considering the available gas handling equipment, the gas compartment can be evacuated and refilled within a reasonable time frame.

Each compartment must be equipped with:

A filling valve.
A gas monitoring device.

Based on the GIS design, each compartment may also be equipped with the following accessories:

A pressure relief device.
A desiccant.
An internal fault arc location detector.

The figure provides an example of a partitioning design for different types of adjacent compartments.

Topics

Power Systems Switchgear GIS

Hello，I'm Wdwiin. A decade of hands-on experience in electrical engineering, specializing in high-voltage systems, smart grids, and renewable energy technologies. Passionate about technical exchange and knowledge sharing, committed to interpreting industry trends with professional insights to empower peers. Connection creates value—let’s explore the boundless possibilities of the electrical world together!

What is the difference between a dielectric and an insulator?

What is the difference between a dielectric and an insulator?

Dielectrics and insulators are distinguished primarily by their applications. One of the main differences is that a dielectric can store electrical energy by becoming polarized in an electric field, whereas an insulator resists the flow of electrons to prevent current conduction. Other key differences between them are outlined in the comparison chart below.Definition of DielectricA dielectric material is a type of insulator that contains few or no free electrons. When subjected to an electric fi

What losses occur during operation of the transformer? How to reduce losses?

What losses occur during operation of the transformer? How to reduce losses?

Transformers experience various types of losses during operation, primarily categorized into two main types: copper losses and iron losses.Copper LossesCopper losses, also known as I²R losses, are caused by the electrical resistance of the transformer windings—typically made of copper. As current flows through the windings, energy is dissipated in the form of heat. These losses are proportional to the square of the load current (I²R), meaning they increase significantly with high

Cable Fault Detection, Testing, Location and Repair

Cable Fault Detection, Testing, Location and Repair

I. Methods for Cable Testing and Inspection:Insulation Resistance Test: Use an insulation resistance tester to measure the insulation resistance value of the cable. A high insulation resistance value indicates good insulation, while a low value may suggest insulation problems requiring further investigation.Voltage Withstand Test: Apply a high-voltage test using a high-voltage tester to verify whether the cable can withstand high voltage under its rated operating conditions. Under normal circums

Cable Quality Inspection and Cable Detection & Testing

Cable Quality Inspection and Cable Detection & Testing

Power cable quality inspection and cable testing are conducted to ensure that the cable's quality and performance meet specified requirements, thereby guaranteeing the safe and stable operation of power systems. Below are some common contents of power cable quality inspection and cable testing:Visual Inspection: Check the cable surface for physical defects such as damage, deformation, or scratches to ensure the cable's exterior is intact.Dimensional Measurement: Measure dimensional parameters su

Source professional electrical partners, experts, and explore smart grid & energy solutions.