What is Electrical Energy Definition Formula Unit of Electrical Energy

Electrical4u
03/09/2024

What is Electrical Energy?

Before explaining what electrical energy is, let us try to review the potential difference between two points in an electric field.

Suppose potential difference between point A and point B in an electric is v volts.

As per the definition of potential difference we can say, if one positive unit electrical charge that is a body containing one-coulomb positive charge travels from point A to point B, it will do v joules work.

Now instead of one-coulomb charge if q coulomb charge moves from point A to B, it will do vq joules work.

If the time taken by the q coulomb charge to travel from point A to B is t second, then we can write the rate of work done as

Again, we define the work done per second as power. In that case, the term

would be electrical power. In differential form, we can write, electric power

Watt is the unit of power.

Now, if we place a conductor in between A and B, and through which the quantity of electric charge q coulomb is passing. The charge passing through a cross-section of the conductor per unit time (second) is

It is nothing but the electric current i, through the conductor.
Now, we can write,

If this current flows through the conductor for a time t, we can say the total work done by the charge is

We define this as electrical energy. So, we can say,

Electrical Energy Definition

Electrical energy is the work done by electric charge. If current i ampere flows through a conductor or through any other conductive element of potential difference v volts across it, for time t second, the electric energy is,

Electrical Energy Formula

The expression of electric power is

The electrical energy is

Unit of Electrical Energy

Basically, we find the unit of electrical energy is joule. This equals to one watt X one second. Commercially, we also use other units of electrical energy, such as watt-hours, kilo watt hours, megawatt hours etc.

Watt Hours

If one watt power is being consumed for 1 hour time, the energy consumed is one watt-hour.

BOT Unit or Board of Trade Unit or Kwh

The practical, as well as a commercial unit of electrical energy, is kilowatt hour. The fundamental commercial unit is watt-hour and one kilowatt hour implies 1000 watt hours. The electrical supply companies take electric energy charges from their consumer per kilowatt hour unit basis. This kilowatt hour is board of trade unit that is BOT unit.

Source: Electrical4u

Statement: Respect the original, good articles worth sharing, if there is infringement please contact delete.

Electrical4u

Electrical4U is dedicated to the teaching and sharing of all things related to electrical and electronics engineering.

What is a Pure Resistive AC Circuit?
What is a Pure Resistive AC Circuit?
Pure Resistive AC CircuitA circuit containing only a pure resistanceR(in ohms) in an AC system is defined as a Pure Resistive AC Circuit, devoid of inductance and capacitance. Alternating current and voltage in such a circuit oscillate bidirectionally, generating a sine wave (sinusoidal waveform). In this configuration, power is dissipated by the resistor, with voltage and current in perfect phase—both reaching their peak values simultaneously. As a passive component, the resistor neither
Edwiin
06/02/2025
What is a Pure Capacitor Circuit?
What is a Pure Capacitor Circuit?
Pure Capacitor CircuitA circuit comprising only a pure capacitor with capacitanceC(measured in farads) is termed a Pure Capacitor Circuit. Capacitors store electrical energy within an electric field, a characteristic known ascapacitance(alternatively referred to as a "condenser"). Structurally, a capacitor consists of two conductive plates separated by a dielectric medium—common dielectric materials include glass, paper, mica, and oxide layers. In an ideal AC capacitor circuit, the current
Edwiin
06/02/2025
Resistance Switching in a Circuit Breaker
Resistance Switching in a Circuit Breaker
Resistance SwitchingResistance switching refers to the practice of connecting a fixed resistor in parallel with the contact gap or arc of a circuit breaker. This technique is applied in circuit breakers with high post-arc resistance in the contact space, primarily to mitigate re-striking voltages and transient voltage surges.Severe voltage fluctuations in power systems arise from two main scenarios: interrupting low-magnitude inductive currents and breaking capacitive currents. Such overvoltages
Edwiin
05/23/2025
What is Biot Savart Law?
What is Biot Savart Law?
The Biot-Savart Law is employed to determine the magnetic field intensity dHnear a current-carrying conductor. In other words, it describes the relationship between the magnetic field intensity generated by a source current element. This law was formulated in 1820 by Jean-Baptiste Biot and Félix Savart. For a straight wire, the direction of the magnetic field adheres to the right-hand rule. The Biot-Savart Law is also referred to as Laplace’s law or Ampère’s law.Conside
Edwiin
05/20/2025
Inquiry
Download
IEE-Business is dedicated to serving the personnel in the global power industry.
Join IEE-Business, not only can you discover power equipment and power knowledge, but also canhnd like - minded friends!