| Brand | Switchgear parts |
| Model NO. | HS11FD series Knife Disconnect Switch Error proof type with grounding function – isolator |
| Rated voltage | AC 400V |
| Rated normal current | 400A |
| Series | HS11FD |
HS11FD series switch was originally a knife type change-over switch, and then it was redesigned and improved into an error proof isolator with grounding function (hereinafter referred to as the switch), which added a mechanical locking mechanism, opening and closing signal output, grounding function and live indication function.
It effectively solved the technical problems of low-voltage switch grounding difficulty, hidden danger of closing with ground wire, and prone to safety accidents.
It has simple structure and convenient grounding, It can prevent the occurrence of switching on accident with ground wire and the occurrence of loaded broach switch accident.
The design state of this switch is divided into power on state and grounding state. This switch meets the requirements of standard GB14048.3-2008.
Knife Disconnect Switch Main technical parameters
| Agreed heating current (A) |
200 |
400 |
600 |
| Rated insulation voltage (V) |
1000 |
1000 | 1000 |
| Rated working voltage (V) |
400 |
400 |
400 |
| Mechanical life (Times) |
1600 |
1000 |
1000 |
| Rated short-time withstand current (kA) |
10 |
20 |
25 |
| Operating force (N) |
≤300 |
≤400 |
≤400 |
Due to the addition of live indication function to this series of switches, there are phase sequence requirements for power supply in the internal circuit.
Please indicate that the zero line (N pole) is on the left or right side when ordering, and also indicate the current level, wiring mode and quantity.
Please consult our technical department for special orders. For example: HS11FD-200/481 N pole is on the right side of 10 sets.
-
Strange Devices on Transmission Lines: 5 Little-Known Practical Functions（1）1 Aviation Warning SpheresAviation warning spheres, also known as reflective safety spheres, are used on overhead transmission lines near airports, especially on extra-high-voltage (above 220kV) lines and river-crossing transmission lines. Highly visible aviation marker spheres (aviation warning spheres) must be installed along the lines to provide warning signals.The aviation marker sphere (aviation warning sphere) has a diameter of ф=600mm. The sphere can be manufactured in various bright coloLeon09/04/2025 -
Transmission LineIn transmission lines, a "π" connection involves breaking the original line from Substation A to Substation B and inserting Substation C, forming a "π" configuration. After the "π" connection, the original single line is divided into two independent transmission lines. Following the "π" connection, Substations B and C may both be powered by Substation A (in this case, Substation C receives power via a feeder from Substation B's busbar, or possibly from another voltage point within Substation B);Encyclopedia09/04/2025 -
What are the principles of forced re-energization of transmission lines?Principles of Forced Re-energization of Transmission LinesRegulations for Forced Re-energization of Transmission Lines Correctly select the forced re-energization end of the line. If necessary, change the connection configuration before forced re-energization, taking into account the reduction of short-circuit capacity and its impact on grid stability. There must be a transformer with its neutral point directly grounded on the busbar at the forced re-energization end. Pay attention to the impactEdwiin09/04/2025 -
Analysis of Accident Handling in Transmission LinesAnalysis of Transmission Line Fault HandlingAs a fundamental component of the power grid, transmission lines are widely distributed and numerous, often exposed to diverse geographical and climatic conditions, making them highly susceptible to faults. Common causes include overvoltage, pollution flashover, insulation damage, tree encroachment, and external damage. Line tripping is one of the most frequent faults in power plant and substation operations, with fault types including single-phase-to-Leon09/04/2025 -
The difference between transmission and distribution linesTransmission lines and distribution lines are both used to carry electrical power from one location to another. However, they differ significantly in key aspects such as primary function, voltage levels, phase configuration, and conductor placement. These differences are essential for understanding their distinct roles in the power system.The Difference Between Transmission and Distribution Line is given below in the tabulated form.Electricity generation is a critical component of the power systEdwiin09/04/2025 -
Ensuring Reliability: A Deep Dive into Transformer MaintenanceIntroductionElectric transformers are the backbone of modern power distribution systems, silently enabling the reliable delivery of electricity to homes, businesses, and industries. As these critical assets age and the demand for uninterrupted power grows, the importance of diligent transformer maintenance has never been greater. This essay explores the essential role of transformer maintenance, highlighting the value of proactive care, the impact of advanced diagnostic technologies, and the traVziman09/03/2025
