| Brand | Wone Store |
| Model NO. | DC miniature circuit breaker |
| Rated frequency | 50/60Hz |
| Series | DCB |
Description
Product introduction: DC small circuit breaker is suitable for lines with rated current of 125A and below DC current, rated DC voltage of 250V and 500V. GYM9-125DC series DC small circuit breaker adopts the overload and short circuit protection design of DC power distribution system facilities and electrical, which can be widely used in electric power.
Product Features
The design structure consists of the shell, operating mechanism, thermal tripper, electromagnetic release contact system, arc extinguishing system, etc
It has the function of overload and short circuit protection.
Powerful permanent magnet arc fire extinguishing system, so that the short circuit capacity of the product reaches 6KA.
35mm standard rail installation.
The window design can make the product status clear at a glance and avoid misoperation.
Widened handle design to make the product easier to operate.
Anti-crack buckle design enhances product durability and prolongs product life.
The flame-retardant shell design greatly improves product safety.
DC small circuit breaker selection parameters
| Test | DC experimental current | Start state | Tripping or no tripping time limit |
Expected results |
remark |
| a | 1.05In | Cold | t≥1h(In≤63A) t≥2h(In>63A) |
There is no tripping device |
|
| b | 1.3In | After testing immediately | t<2h(In>63A) t<1h(In≤63A) |
Tripping device |
The current steadily rises to the specified value within 5S |
| C | 8In | Cold | t≥0.2s | There is no tripping device |
Turn off the auxiliary switch and turn on the power |
| 12In | t<0.2s | Tripping device |
Working Environment:
The ambient air temperature should not exceed +40°C, low should not exceed -5°C, and the average value should not exceed +35°C.
The altitude of the installation site should not exceed 2000 meters.
When the ambient temperature is high, the relative humidity of the atmosphere does not exceed 50%, and the temperature is +40°C, which can have a higher relative at lower temperatures
Humidity:The average relative humidity in the wet month is 90%, and the average relative humidity in the month is 90%. Taking into account the average low temperature
+25°C condensation on the surface of the product due to temperature changes.
The pollution level is level 2.
The installation category is level 2 and level 3.
Use TH35-7.5 steel mounting rail for installation.
The inclination of the mounting surface and vertical surface should not exceed 5°.
Compress the wire with screws.
-
DM1z-250L/2300 DC Circuit Breaker
-
PEBS-L-125 (UL1077) DC miniature circuit breaker
-
PEBS-H (250-1000V,63A/125A) DC miniature circuit breaker
-
PEBS-L (80V/160V,63A/125A) DC miniature circuit breaker
-
PEBS-H-50 DC miniature circuit breaker
-
Weatherproof Enclosure DC miniature circuit breaker
-
DC MCCB molded case circuit breakers
-
Why Regular Transformer Maintenance Matters: 5 Serious Consequences of Neglecting ItI. Allowable TemperatureWhen a transformer is in operation, its windings and iron core generate copper loss and iron loss. These losses are converted into heat energy, causing the temperature of the transformer's iron core and windings to rise. If the temperature exceeds the allowable value for a long time, the insulation will gradually lose its mechanical elasticity and age.The temperature of each part of the transformer during operation is different: the winding temperature is the highest, folRockwell09/12/2025 -
How to Implement Condition-Based Maintenance for Power Transformers? A Complete 4-Step Process Analysis1. Definition of Condition-Based MaintenanceCondition-based maintenance refers to a maintenance method where decisions on whether and how to perform maintenance are determined based on the real-time operating status and health condition of equipment. It has no fixed maintenance methods or schedules. The prerequisite for condition-based maintenance is the establishment of equipment parameters and the comprehensive analysis of various operational information of the equipment, so as to make reasonaNoah09/12/2025 -
Can't choose a dry-type transformer? Get expert advice – free.Traction Rectifier TransformersRated capacity: 800 to 4400 kVA; Voltage class: 10 kV and 35 kV; Rectifier pulse number: 12-pulse and 24-pulse. Compared with 12-pulse rectifier circuits, 24-pulse rectifier circuits can reduce the harmonic pollution of the power grid by 50%, and no filtering equipment is needed at this location. It is suitable for power supply systems of urban subways and rail transit.Excitation Rectifier TransformersRated capacity: 315 to 3000 × 3 kVA; Voltage class: 10 kV, 13.8Vziman09/12/2025 -
SG10 Series Transformer Overload Protection Solution | Prevent Overheating and Damage, View NowOperating Conditions in National Standard GB 6450-1986Ambient temperature: Maximum ambient temperature: +40°C Daily average maximum temperature: +30°C Annual average maximum temperature: +20°C Minimum temperature: -30°C (outdoor); -5°C (indoor) Horizontal axis: Product load; Vertical axis: Average coil temperature rise in Kelvin (note: not in Celsius).For Class H insulation products, the long-term temperature resistance of insulation materials is stipulated by the state as 180°C. However, the inRockwell09/12/2025 -
High harmonics? Your transformer may be overheating and aging fast.This report is based on the analysis of one-day power quality monitoring data of your company's distribution system. The data shows that there is significant three-phase current harmonic distortion in the system (with a high total harmonic distortion of current, THDi). In accordance with international standards (IEC/IEEE), harmonic currents at this level have posed substantial risks to the safe, reliable, and economical operation of the power supply transformer, mainly manifested in additional hLeon09/12/2025 -
Ultimate Guide to AC Contactor Abnormal Noise: From Electromagnetic Noise to Mechanical Vibration, Accurate Diagnosis and HandlingIn electrical control systems, AC contactors are among the commonly used electrical components, and they are also a common source of various electrical faults. After long-term use—especially in harsh environments with high levels of dust—AC contactors may sometimes emit squeaking or rattling noises after being pulled in and held. The causes of this phenomenon are analyzed as follows.Squeaking Noise After Pull-In and HoldingA fully functional AC contactor makes no noise when energized and pulledFelix Spark09/11/2025
-
Dedicated Vacuum Contactor Solution for Port Shore Power SystemsI. Background and ChallengesShore power systems have become core technical equipment for ports to reduce carbon emissions and noise pollution. However, these systems face two major challenges in the harsh operational environment of ports:Severe Environmental Corrosion: High humidity and salt spray in port areas cause serious corrosion to metal components and enclosures of electrical equipment, significantly impacting electrical lifespan and operational reliability.High Switching Requirements:Wone Store09/13/2025 -
ABB Vacuum Contactor KC2 Power Supply System Technical Transformation PlanIssue OverviewThe 10kV air compressor starting system of a company utilizes the ABB vacuum contactor KC2 as the control component for the operating circuit. The dedicated wide-voltage power supply module paired with this contactor presents the following issues:Frequent failures: The power supply module fails to properly transition the voltage from 300V to 12V, resulting in fuse blowouts.Poor heat dissipation: Enclosed installation of the module leads to insufficient heat dissipation, accelerWone Store09/13/2025 -
Solution for Medium-Voltage Motor Control and Protection Using Vacuum Contactor-Fuse (VCF) in a Coal Conveying SystemProject BackgroundA coal conveying system comprises 15 belt conveyors driven by medium-voltage motors. The system operates under complex conditions, with motors often subjected to heavy loads and frequent starts. To address these challenges and achieve effective control and reliable protection during motor startup, the project comprehensively adopts Vacuum Contactor-Fuse (VCF) combination devices for the 6kV medium-voltage motor power distribution. This solution details the technical features,Wone Store09/13/2025
