Customization 66kV 88kV 110kV 132kV Three Phase Z-type winding Oil-Immersed Earthing Transformer source manufacturer
Key attributes
| Brand | ROCKWILL |
| Model NO. | Customization 66kV 88kV 110kV 132kV Three Phase Z-type winding Oil-Immersed Earthing Transformer source manufacturer |
| Rated voltage | 66kV |
| Phases | Three-phase |
| Series | JDS |
Product descriptions from the supplier
Product Overview
Rockwill delivers reliable and high-performance earthing transformers designed for 66kV power systems. Our oil-immersed transformers are engineered to provide stable neutral grounding solutions while ensuring operational safety and system protection. Manufactured in compliance with international standards including IEC and GB, these transformers incorporate premium materials and rigorous quality control throughout production.
Basic Info.
Key Features
Voltage Class: 66kV system voltage (200 BIL)
Capacity Range: Standard units from 100kVA to 10,000kVA
Winding Configuration: Optimized zigzag (ZNyn) design
Cooling System: ONAN/OFAF cooling options
Insulation: Mineral oil or synthetic ester fluid
Construction:
Corrugated tank or radiator cooling
Hermetically sealed or conservator tank options
CRGO silicon steel core
Copper/aluminum windings
Technical Advantages
Enhanced Safety: Built-in Buchholz relay and pressure relief device
Low Impedance: Zero-sequence impedance <15Ω for effective fault current management
Durability: Corrosion-resistant paint system for outdoor installations
Efficiency: Reduced no-load losses through optimized core design
Flexibility: Off-circuit tap changer (±5% in 2.5% steps)
Typical Applications
Utility Networks:
Neutral grounding for 66kV transmission systems
Arc suppression coil connections
Resistance grounding systems
Industrial Plants:
Petrochemical facilities
Mining operations
Steel manufacturing plants
Renewable Energy:
Wind farm collector stations
Solar PV substations
Hydroelectric plants
Performance Specifications
Temperature Range: -30°C to +40°C ambient
Humidity: ≤95% monthly average
Altitude: Up to 2000m ASL
Sound Level: ≤75dB at 1m
Efficiency: ≥99.2% at full load
Testing Protocol
All units undergo comprehensive testing including:
Zero sequence impedance measurement
Induced overvoltage test (260Hz)
Lightning impulse test (350kV)
Temperature rise test (65K max.)
Oil dielectric strength test (≥50kV)
Service Conditions
Suitable for indoor/outdoor installation
Wind resistant up to 35m/s
Non-explosive environments
Seismic capability: 0.3g horizontal acceleration
An earthing/grounding transformer is a special type of transformer that artificially creates a neutral point for ungrounded or low-current grounded power systems. It constructs a grounding circuit through a specific winding design, with two core functions: first, to provide a low-impedance path for zero-sequence current in the system, ensuring that the fault current reaches the operating threshold of the relay protection device when a single-phase ground fault occurs, enabling rapid fault location and isolation; second, to maintain system voltage balance, suppress excessive voltage rise of non-fault phases during faults, and protect the insulation safety of power grid equipment. Unlike ordinary power transformers, its core function is to "construct a grounding circuit" rather than "voltage transformation", and it is usually designed according to short-time load capacity instead of continuous operating capacity.
The differences between the two stem from the essential difference in functional positioning, specifically reflected in three aspects: ① Different core functions: ordinary power transformers focus on voltage transformation and energy transmission, while earthing/grounding transformers focus on constructing neutral points and providing fault current paths; ② Different capacity calibration: ordinary power transformers are marked with continuous operating capacity (long-term load capacity), while earthing/grounding transformers are marked with short-time rated capacity (capacity that can be carried within a specified time based on fault current and withstand time, such as 30 seconds); ③ Different winding designs: earthing/grounding transformers mostly adopt special winding structures such as zigzag (ZN), while ordinary power transformers mainly use conventional windings such as star and delta, and earthing/grounding transformers usually have no traditional voltage transformation ratio.
Related Products
-
35KV-0.4KV Oil-Immersed Earthing Transformer-3 Phase Zig-Zag Type
-
Grounding/earthing TransformerUp to 36kV
-
100kVA 120kVA 150KVA 315kVA 630kVA Neutral Grounding/earthing Transformer Dry Type Power Transformer
-
35kV Dry Type Grounding Transformer Cast Resin 3 Phase
-
Three - phase 11kV 22kV grounding/earthing transformers
-
20kV Three Phase Oil-Immersed Earthing Transformer
-
33kv Oil Immersed Grounding /Earthing Transformer
Related Knowledges
-
Innovative & Common Winding Structures for 10kV High-Voltage High-Frequency Transformers1.Innovative Winding Structures for 10 kV-Class High-Voltage High-Frequency Transformers1.1 Zoned and Partially Potted Ventilated Structure Two U-shaped ferrite cores are mated to form a magnetic core unit, or further assembled into series/series-parallel core modules. Primary and secondary bobbins are mounted on the left and right straight legs of the core, respectively, with the core mating plane serving as the boundary layer. Windings of the same type are grouped on the same side. Litz wire iNoah12/05/2025 -
How to Increase Transformer Capacity? What Needs to Be Replaced for Transformer Capacity Upgrade?How to Increase Transformer Capacity? What Needs to Be Replaced for Transformer Capacity Upgrade?Transformer capacity upgrade refers to improving the capacity of a transformer without replacing the entire unit, through certain methods. In applications requiring high current or high power output, transformer capacity upgrades are often necessary to meet demand. This article introduces methods for transformer capacity upgrade and the components that need to be replaced.A transformer is a criticalEcho12/04/2025 -
Causes of Transformer Differential Current and Hazards of Transformer Bias CurrentCauses of Transformer Differential Current and Hazards of Transformer Bias CurrentTransformer differential current is caused by factors such as incomplete symmetry of the magnetic circuit or insulation damage. Differential current occurs when the primary and secondary sides of the transformer are grounded or when the load is unbalanced.Firstly, transformer differential current leads to energy waste. Differential current causes additional power loss in the transformer, increasing the load on theEdwiin12/04/2025 -
Protection Logic Improvement and Engineering Application of Grounding Transformers in Rail Transit Power Supply Systems1. System Configuration and Operating ConditionsThe main transformers at Zhengzhou Rail Transit’s Convention & Exhibition Center Main Substation and Municipal Stadium Main Substation adopt a star/delta winding connection with a non-grounded neutral point operation mode. On the 35 kV bus side, a Zigzag grounding transformer is used, connected to ground through a low-value resistor, and also supplies station service loads. When a single-phase ground short-circuit fault occurs on a line, a pathEcho12/04/2025 -
How to Diagnose and Eliminate Transformer Core Grounding FaultsThe windings and core of a transformer are the primary components responsible for transmitting and transforming electromagnetic energy. Ensuring their reliable operation is a major concern. Statistical data shows that core-related issues account for the third-highest cause of transformer failures. Manufacturers have paid increasing attention to core defects and have implemented technical improvements regarding reliable core grounding, core ground monitoring, and ensuring single-point grounding.Felix Spark12/04/2025 -
Functions and Specific Wiring Method of the Grounding Disconnect Switch for Pad-Mounted TransformersThe grounding disconnect switch of a pad-mounted transformer is a switching device used to isolate the pad-mounted transformer from the grounding cable. It is an essential component of pad-mounted transformer equipment and plays a critical role in protecting the safety of the transformer equipment. The grounding disconnect switch of a pad-mounted transformer serves important functions in grounding down leads, grounding switching, auxiliary grounding, and lightning protection.Its functions includNoah12/04/2025
Related Solutions
-
Intelligent Operation Solution for 12kV Vacuum Circuit Breakers: Integrating Real-time Monitoring & Lifetime OptimizationⅠ. Equipment Operation & MaintenanceIntelligent Monitoring System IntegrationMulti-parameter Real-time Monitoring: Embedded sensors (temperature, displacement, Hall effect current sensors) track contact temperature rise, mechanical characteristics (opening/closing speed, overtravel), coil current, and partial discharge signals. Data undergoes preprocessing via edge computing prior to cloud upload.Lifetime Prediction Model: Dynamically evaluates remaining lifespan using electrical wear dataRockwill06/10/2025 -
SF6 Circuit Breaker Solutions for Outdoor Installation (Anti-Pollution & Seismic Resistance)I.Core Challenges in Outdoor InstallationIn high-voltage transmission and distribution systems, SF6 circuit breakers are exposed to complex outdoor environments for extended periods, facing the following critical issues:Pollution & Insulation DegradationDust, salt fog, and industrial pollutants in outdoor environments easily adhere to equipment surfaces. In coastal or industrial areas, pollution levels may reach Class IV, resulting in insufficient creepage distance and triggering flashoRockwill05/12/2025 -
12kV Indoor Vacuum Circuit Breaker Southeast Asia Solution: Anti-Corrosion Compact Design12kV Indoor Vacuum Circuit Breaker Southeast Asia Solution: Anti-Corrosion Compact DesignⅠ. Executive SummarySoutheast Asia faces rapidly growing electricity demand alongside environmental challenges including high temperatures, humidity, salt spray corrosion, and grid instability. This solution recommends Solid Insulated Pole-Mounted Vacuum Circuit Breakers (VCB) featuring high reliability, compact design, and smart monitoring. Tailored for tropical climates and industrial scenarios, itRockwill06/10/2025
