
ਸਾਰੀਆਂ ਫਾਊਂਡੇਸ਼ਨ ਆਰਸੀਸੀ ਹੋਣੀਆਂ ਚਾਹੀਦੀਆਂ ਹਨ। ਆਰਸੀਸੀ ਢਾਂਚਿਆਂ ਦਾ ਡਿਜ਼ਾਇਨ ਅਤੇ ਨਿਰਮਾਣ IS:456 ਅਨੁਸਾਰ ਕੀਤਾ ਜਾਵੇਗਾ ਅਤੇ ਕੰਕ੍ਰੀਟ ਦਾ ਘਟਾ ਮਾਨ M-20 ਹੋਣਾ ਚਾਹੀਦਾ ਹੈ।
ਡਿਜ਼ਾਇਨ ਲਈ ਲਿਮਿਟ ਸਟੇਟ ਮੈਥਡ ਅਦੋਤ ਕੀਤਾ ਜਾਵੇਗਾ।
IS:1786 ਅਨੁਸਾਰ ਕੋਲਡ ਟਵਿਸਟਡ ਡੀਫਾਰਮਡ ਬਾਰਸ ਜਾਂ TMT ਬਾਰਸ ਨੂੰ ਰੀਨਫੋਰਸਮੈਂਟ ਲਈ ਉਪਯੋਗ ਕੀਤਾ ਜਾਵੇਗਾ।
ਫਾਊਂਡੇਸ਼ਨ ਸਟੀਲ ਸਟਰਕਚਰ ਅਤੇ ਯਾ ਸਾਧਾਨ ਜਾਂ ਸੁਪਰਸਟਰਕਚਰ ਦੀ ਕ੍ਰਿਟੀਕਲ ਲੋਡਿੰਗ ਕੰਬੀਨੇਸ਼ਨ ਲਈ ਡਿਜ਼ਾਇਨ ਕੀਤੀ ਜਾਵੇਗੀ।
ਜੇ ਲੋੜ ਪੈਂਦੀ ਹੈ ਤਾਂ ਫਾਊਂਡੇਸ਼ਨ ਲਈ ਪ੍ਰੋਟੈਕਸ਼ਨ ਪ੍ਰਦਾਨ ਕੀਤੀ ਜਾਵੇਗੀ, ਜਿਸ ਨਾਲ ਕਿਸੇ ਵਿਸ਼ੇਸ਼ ਲੋੜ ਲਈ ਆਗਰੈਸਿਵ ਐਲਕੈਲਾਇਨ ਸੋਇਲ, ਬਲਾਕ ਕੱਟਨ ਸੋਇਲ ਜਾਂ ਕਿਸੇ ਵੀ ਸੋਇਲ ਦੀ ਕਿਸੇ ਭੀ ਨੁਕਸਾਨਦਹ ਹੋਣ ਵਾਲੀ ਸਥਿਤੀ ਨੂੰ ਸੰਭਾਲਿਆ ਜਾਵੇਗਾ ਜੋ ਕੰਕ੍ਰੀਟ ਫਾਊਂਡੇਸ਼ਨ ਲਈ ਹਾਨਿਕਾਰਕ ਹੋ ਸਕਦੀ ਹੈ।
ਸਾਰੇ ਸਟਰਕਚਰ ਨੂੰ ਵਿਹਿਣ ਅਤੇ ਓਵਰਟਰਨਿੰਗ ਸਥਿਰਤਾ ਲਈ ਨਿਰਮਾਣ ਅਤੇ ਚਲਾਨ ਦੀਆਂ ਦੋਵਾਂ ਸਥਿਤੀਆਂ ਵਿਚ ਵੱਖ ਵੱਖ ਲੋਡਾਂ ਦੀ ਕੰਬੀਨੇਸ਼ਨ ਲਈ ਜਾਂਚ ਕੀਤੀ ਜਾਵੇਗੀ।
ਓਵਰਟਰਨਿੰਗ ਦੀ ਜਾਂਚ ਲਈ, ਫੁੱਟਿੰਗ ਦੇ ਊਪਰ ਸ਼ਿਕਾਰੀ ਸੋਇਲ ਦਾ ਵਜਨ ਲਿਆ ਜਾਵੇਗਾ ਅਤੇ ਫਾਊਂਡੇਸ਼ਨ 'ਤੇ ਪ੍ਰਿਥਵੀ ਦਾ ਇਨਵਰਟਡ ਫਰਸਟਮ ਦੀ ਗਿਣਤੀ ਨਹੀਂ ਕੀਤੀ ਜਾਵੇਗੀ।
ਕਿਸੇ ਭੀ ਅੰਡਰਗਰਾਂਡ ਏਨਕਲੋਜ਼ਚਰ ਦੀ ਬੇਸ ਸਲੈਬ ਨੂੰ ਮਹਾਨ ਪਾਣੀ ਦੇ ਸਤਹ ਲਈ ਡਿਜ਼ਾਇਨ ਕੀਤਾ ਜਾਵੇਗਾ। ਬਾਉਂਸੀ ਦੇ ਲਈ ਕਮਾਲਤਾ ਫੈਕਟਰ 1.5 ਨੂੰ ਯੱਕੀਨੀ ਬਣਾਇਆ ਜਾਵੇਗਾ।
ਟਾਵਰ ਅਤੇ ਸਾਧਾਨ ਫਾਊਂਡੇਸ਼ਨ ਨੂੰ ਸਲਾਇਡਿੰਗ, ਓਵਰਟਰਨਿੰਗ ਅਤੇ ਪੁੱਲਾਉਟ ਦੀ ਲੋਡਿੰਗ ਦੀ ਜਾਂਚ ਲਈ ਨੋਰਮਲ ਸਥਿਤੀ ਲਈ 2.2 ਅਤੇ ਸ਼ਾਰਟ ਸਰਕਿਟ ਸਥਿਤੀ ਲਈ 1.65 ਦੀ ਕੰਡੀਸ਼ਨ ਲਈ ਜਾਂਚ ਕੀਤੀ ਜਾਵੇਗੀ।
ਟ੍ਰਾਂਸਮਿਸ਼ਨ ਟਾਵਰ ਵਿਚਲੇ ਵਿਭਿਨਨ ਸਥਾਨਾਂ ਵਿਚ ਹੋ ਸਕਦਾ ਹੈ। ਪਾਵਰ ਸਿਸਟਮ ਟ੍ਰਾਂਸਮਿਸ਼ਨ ਨੈਟਵਰਕ ਦੁਨੀਆ ਭਰ ਵਿਚ ਫੈਲ ਰਹੇ ਹਨ। ਵਿਭਿਨਨ ਸਥਾਨਾਂ ਦੀ ਸੋਇਲ ਦੀ ਸਥਿਤੀ ਵੀ ਵਿੱਖੀ ਹੁੰਦੀ ਹੈ। ਸੋਇਲ ਦੀ ਪ੍ਰਕ੍ਰਿਤੀ ਉੱਤੇ ਨਿਰਭਰ ਕਰਦੇ ਹੋਏ, ਟ੍ਰਾਂਸਮਿਸ਼ਨ ਟਾਵਰਾਂ ਦੀ ਫਾਊਂਡੇਸ਼ਨ ਦੀਆਂ ਪ੍ਰਕਾਰਾਂ ਦਾ ਚੁਣਾਅ ਅਤੇ ਨਿਰਮਾਣ ਕੀਤਾ ਜਾਵੇਗਾ। ਅਸੀਂ ਤੁਹਾਨੂੰ ਅਲਗ ਅਲਗ ਸੋਇਲ ਦੀਆਂ ਸਥਿਤੀਆਂ ਵਿਚ ਟ੍ਰਾਂਸਮਿਸ਼ਨ ਟਾਵਰਾਂ ਦੀ ਫਾਊਂਡੇਸ਼ਨ ਦੀ ਵਰਗੀਕਰਣ ਲਈ ਸਫ਼ਾਲਾਨ ਅਤੇ ਸਹਿਜ ਗਾਇਡਲਾਈਨਾਂ ਦੇਣ ਦੀ ਕੋਸ਼ਿਸ਼ ਕੀਤੀ ਹੈ।
SL |
Name of soil encountered |
Type of foundation to be adopted |
1 |
In good soil (silty sand mixed with clay) |
Normal Dry |
2 |
Where top layer of Black Cotton soil extends upto 50% of the depth with good soil there after. |
Partial Black Cotton |
3 |
Where top layer of black cotton soil exceeds 50% and extends upto full depth or is followed by good soil. |
Black Cotton |
4 |
Where top layer is good soil upto 50% of the depth but the lower layer is a black cotton soil |
Black Cotton |
5 |
Where subsoil water is met at 1.5 ml or more below the ground level in good soil |
Wet |
6 |
Good soil locations which are in surface water for long period with water penetration not exceeding 1.0 m below ground level (e.g. paddy fields). |
Wet |
7 |
In good soil where subsoil water is encountered between 0.75m and 1.5m depth from ground level. |
Partially submerged |
8 |
In good soil where subsoil water is encountered within 0.75m depth from ground level |
Fully Submerged |
9 |
Where top layer of normal dry soil extends upto 85% of the depth followed by fissured rock without presence of water. |
Dry Fissured Rock |
10 |
Where top layer is lissured rock followed by good soil/sandy soil with/without presence of water |
Special foundation |
11 |
Where normal soil/tissured rock extends upto 85% of the depth followed by hard rock |
Dry fissured Rock with under cut in Fisured Rock combined with anchor bar for hard rock design |
12 |
Where fissure rock os encountered with subsoil water within 0.75m or below 0.75m from G.L. (Top layer may be either a good soil or black cotton soil) |
Submerged Fissured Rock |
13 |
Where Hard Rock is encountered at 1.5 m or less below ground level. |
Hard Rock |
14 |
Where Hard Rock is encountered from 1.5 m to 2.5m below G.L. (Top layer being good soil) |
with chimney for Normal Soil Hard Rock Foundation |
15 |
Where hard rock is encountered from 1.5m to 2.5 m below G./L. (Top layer either in Black cotton) soil or fissured Rock |
Hard Rock Foundation design with chimneys designed for wet black cotton soil. |
16 |
Where fissured rock is encountered at the bottom of pit (with black cotton soil at top) |
Composite Foundation |
17 |
Where hard rock is encountered at bottom with water and black cotton soil at top and hard rock layer depth is less than 1.5 m. |
Hard Rock |
18 |
Sandy soil with clay content not exceeding 10% |
Dry Sandy soil foudation |
19 |
Sandy soil with water table in the pits |
Wet sandy soil design to be developed considering the depth of water |
20 |
Where top layer upto 1.5 m below G.L. is normal dry soil and thereafter hard soil/murrum |
Normal dry with undercut |
21 |
Where bottom layer is marshy soil with top layer of good soil/fissured rock/black cotton |
Soil investigation is to be carried out and special foundation design to be developed. |
22 |
Where the top layers are a combination of clinker mixed with firm soil, gravel and stone chips upto 60% of foundation deapth from ground level followed by hard murrum |
Normal dry with undercut |
23 |
Where top layers are combination of hard murrum, soft rock etc. followed by yellow/black clayee soil |
Special foundation design is to be developed after carrying out soil investigation. |
ਉੱਪਰ ਦਿੱਤੀਆਂ ਵਿਸ਼ੇਸ਼ਤਾਵਾਂ ਨਾਲ ਸੋਈਲ ਦੀ ਕੋਈ ਹੋਰ ਕੰਬੀਨੇਸ਼ਨ ਵਿਸ਼ੇਸ਼ ਫਾਊਂਡੇਸ਼ਨ ਡਿਜ਼ਾਇਨ ਦੀ ਵਿਕਾਸ ਲਈ ਲੋੜ ਪੈਗੀ।
ਟਿਕਾਣਾ: ਮੂਲ ਦੀ ਇੱਜ਼ਤ ਰੱਖੋ, ਅਚ੍ਛੀ ਲੇਖਾਂ ਨੂੰ ਸ਼ੇਅਰ ਕਰਨਾ ਚਾਹੀਦਾ ਹੈ, ਜੇ ਕੋਈ ਉਲਾਂਘਣ ਹੈ ਤਾਂ ਕਿਨਾਰੇ ਨੂੰ ਦੁਆਰਾ ਹਟਾਓ।