
Ang relay usa ka awtomatikong device nga nagsilbing pag-detect sa abnormal nga kondisyon sa electrical circuit ug nag-sulay sa iyang mga contacts. Ang mga contacts niini makompleto sa circuit breaker trip coil circuit kung sa diin ang circuit breaker mag-trip aron mahimong ma-disconnect ang defective nga bahin sa electrical circuit gikan sa uban pang healthy nga circuit.
Karon, paminawon nato ang ilang mga termino nga may kalabutan sa protective relay.
Pickup Level of Actuating Signal:
Ang halaga sa actuating quantity (voltage o current) nga naka-threshold sa taas kung asa ang relay magsugyot nga mag-operate.
Kon ang halaga sa actuating quantity mag-increase, ang electromagnetic effect sa relay coil mag-increase, ug sa taas pa sa certain level sa actuating quantity, ang moving mechanism sa relay magsugyot nga mogalaw.
Reset Level:
Ang halaga sa current o voltage sa diin ang relay mag-open sa iyang mga contacts ug mobalik sa original nga posisyon.
Operating Time of Relay:
Kun ang actuating quantity magsugyot nga mag-exceed sa pickup value, ang moving mechanism (tumama og rotating disc) sa relay magsugyot nga mogalaw ug sa dili pa matapos ang iyang journey, ang relay contacts mag-close. Ang panahon nga mao ang elapse gikan sa oras nga ang actuating quantity exceed sa pickup value hangtod sa oras nga ang relay contacts mag-close.
Reset Time of Relay:
Ang panahon nga mao ang elapse gikan sa oras nga ang actuating quantity maging less than sa reset value hangtod sa oras nga ang relay contacts mobalik sa normal nga posisyon.
Reach of Relay:
Ang distance relay mag-operate kon ang distance nga nakita sa relay mas gamay sa pre-specified impedance. Ang actuating impedance sa relay mao ang function sa distance sa distance protection relay. Kini nga impedance o corresponding distance gitawag og reach sa relay.
Ang power system protection relays mahimong icategory sa iba't ibang klase sa relays.
Ang mga klase sa protection relays mahimong icategory basehan sa ilang characteristic, logic, actuating parameter, ug operation mechanism.
Basehan sa operation mechanism, ang protection relay mahimong icategory isip electromagnetic relay, static relay, ug mechanical relay. Taliwala, ang relay wala'y lain kundi usa ka kombinasyon sa usa o daghan pa ka open o closed contacts. Ang tanan o ang pipila ka specific contacts sa relay mag-usab sa ilang estado kon ang actuating parameters naaaplikar sa relay. Kini nga nangangahulugan nga ang open contacts mag-become closed ug ang closed contacts mag-become open. Sa electromagnetic relay, ang closing ug opening sa relay contacts gihimo sa electromagnetic action sa solenoid.
Sa mechanical relay, ang closing ug opening sa relay contacts gihimo sa mechanical displacement sa iba't ibang gear level system.
Sa static relay, kini gihimo pinaagi sa semiconductor switches sama sa thyristor. Sa digital relay, ang on ug off state mahimong irefer isip 1 ug 0 state.
Basehan sa Characteristic, ang protection relay mahimong icategory isip:
Definite time relays
Inverse time relays with definite minimum time(IDMT)
Instantaneous relays.
IDMT with inst.
Stepped characteristic.
Programmed switches.
Voltage restraint over current relay.
Basehan sa logic, ang protection relay mahimong icategory isip-
Differential.
Unbalance.
Neutral displacement.
Directional.
Restricted earth fault.
Over fluxing.
Distance schemes.
Bus bar protection.
Reverse power relays.
Loss of excitation.
Negative phase sequence relays etc.
Basehan sa actuating parameter, ang protection relay mahimong icategory isip-
Current relays.
Voltage relays.
Frequency relays.
Power relays etc.
Basehan sa application, ang protection relay mahimong icategory isip-
Primary relay.
Backup relay.
Ang primary relay o primary protection relay mao ang unang linya sa power system protection samtang ang backup relay mogamit kon ang primary relay mibag-o sa operasyon sa panahon sa fault. Busa, ang backup relay mas molambigit sa action kay ang primary relay. Ang bisan unsang relay mahimong mibag-o sa operasyon tungod sa bisan unsa sa sumala nga mga rason,
Ang protective relay mismo defective.
Walay DC Trip voltage supply sa relay.
Ang trip lead gikan sa relay panel hangtod sa circuit breaker nadisconnect.
Ang trip coil sa circuit breaker nadisconnect o defective.
Walay current o voltage signals gikan sa Current Transformers (CTs) o Potential Transformers (PTs).
Tungod kay ang backup relay mogamit kon ang primary relay mibag-o, ang backup protection relay dili dapat adunay bisan unsang common sa primary protection relay.
Mga ehempiyo sa Mechanical Relay:
Thermal
OT trip (Oil Temperature Trip)
WT trip (Winding Temperature Trip)
Bearing temp trip etc.
Float type
Buchholz
OSR
PRV
Water level Controls etc.
Pressure switches.
Mechanical interlocks.
Pole discrepancy relay.
Karon, paminawon nato ang mga protective relays nga gisagol sa mga power system equipment protection schemes.
| SL | Lines nga Protektahan | Relays nga Gamiton |
| 1 | 400 KV Transmission Line |
Main-I: Non switched o Numerical Distance Scheme Main-II: Non switched o Numerical Distance Scheme |
| 2 | 220 KV Transmission Line |
Main-I : Non switched distance scheme (Fed from Bus PTs) Main-II: Switched distance scheme (Fed from line CVTs) With a changeover facility from bus PT to line CVT and vice-versa. |
| 3 | 132 KV Transmission Line |
Main Protection : Switched distance scheme (fed from bus PT). Backup Protection: 3 Nos. directional IDMT O/L Relays and 1 No. Directional IDMT E/L relay. |
| 4 | 33 KV lines | Non-directional IDMT 3 O/L and 1 E/L relays. |
| 5 | 11 KV lines | Non-directional IDMT 2 O/L and 1 E/L relays. |