Ang overvoltage sa diesel generators mao ang mahimo gikan sa daghang mga factor, kasagaran sa pagkabag-o sa electrical system, problema sa control system, ug pagkabag-o sa load. Ania ang ilang mga common nga mga dahon ug ang ilang detalyadong pagtumong:
Mga Dahon:
Faulty Voltage Regulator: Ang voltage regulator mao ang key component nga nag-control sa output voltage sa generator. Kon ang voltage regulator magfail o magdamage, mahimo na it mogulid sa abnormally high nga output voltage.
Improper Voltage Regulator Settings: Kon ang settings sa voltage regulator wala maayo, mahimo na it molihok sa inaccurate nga voltage regulation, resulta sa overvoltage.
Solutions:
Surihon ang kondisyon sa voltage regulator ug palitan o recalibrate kini kon kinahanglan.
Mga Dahon:
Short Circuit o Open Circuit sa Excitation Windings: Ang short circuit o open circuit sa excitation windings mao ang mahimo mogulid sa abnormal nga excitation current, affecting the output voltage.
Faulty Excitation Regulator: Ang excitation regulator mao ang critical component nga nag-control sa excitation current. Kon ito magfail, mahimo na it mogulid sa loss of control sa excitation current, resulta sa overvoltage.
Solutions:
Surihon ang insulation sa excitation windings ug address any short circuits o open circuits.
Surihon ang kondisyon sa excitation regulator ug palitan o repair kini kon kinahanglan.
Mga Dahon:
Sudden Load Shedding: Kon ang generator maglose sa part o tanan sa iyang load, ang output voltage mao ang mahimong spike instantly. Kon ang voltage regulator wala makapabilis na respond, mahimo na it resulta sa overvoltage.
Unbalanced Load: Kon ang three-phase load wala balanced, mahimo na it mogulid sa voltage sa usa ka phase nga mogulid.
Solutions:
Iwasan ang sudden load shedding kon posible. Kon wala, siguraduhon nga ang voltage regulator makapabilis na respond.
Surihon ang balance sa three-phase load ug adjust ang load distribution kon kinahanglan.
Mga Dahon:
Control System Software Fault: Ang software fault sa control system mao ang mahimo mogulid sa voltage regulator ug uban pang control components nga dili maayo ang pagfunction, resulta sa overvoltage.
Sensor Failure: Ang faulty nga voltage o current sensors mao ang mahimo mogulid sa inaccurate readings sa control system, affecting voltage regulation.
Solutions:
Surihon ang control system software ug update o reinstall kini kon kinahanglan.
Surihon ang kondisyon sa sensors ug palitan o calibrate kini kon kinahanglan.
Mga Dahon:
Grid Interference: Kon ang generator connected sa grid, ang voltage fluctuations o interference sa grid mao ang mahimo mogulid sa generator's output voltage.
Lightning Strikes o Static Discharge: Ang lightning strikes o static discharges mao ang mahimo mogulid sa instantaneous surges nga mogulid sa generator's electrical system, resulta sa overvoltage.
Solutions:
Gamiton ang voltage stabilizers o regulators aron mapugos ang impact sa grid interference.
Install lightning arresters ug surge protectors aron protektahan ang generator gikan sa lightning strikes ug static discharges.
Mga Dahon:
Excessive Generator Speed: Kon ang speed sa diesel engine labi ka taas, ang generator's output voltage mao ang mahimong correspondingly increase.
Transmission System Failure: Ang faults sa transmission system mao ang mahimo mogulid sa unstable nga speed sa generator, affecting the output voltage.
Solutions:
Surihon ang speed control mechanism sa diesel engine aron masiguro nga ito nagoperate sa normal range.
Surihon ang kondisyon sa transmission system ug address any faults.
Mga Dahon:
Loose Connections: Ang loose connections mao ang mahimo mogulid sa poor contact, affecting voltage stability.
Oxidized Joints: Ang oxidized joints mao ang mahimo mogulid sa increased resistance, affecting voltage transmission.
Solutions:
Surihon ang tanang electrical connections aron masiguro nga sila secure.
Linisin ang joints aron matangtang ang oxidation ug masiguro ang good electrical connections.
Ang overvoltage sa diesel generators mao ang mahimo gikan sa variety of factors, kasagaran sa voltage regulator failure, excitation system failure, load changes, control system failure, external interference, mechanical failure, ug electrical connection issues. Ang addressing sa tanang different causes sa appropriate solutions mao ang mahimo mogulid sa effective prevention ug resolution sa overvoltage problems, ensuring the normal operation of the generator. We hope the above information is helpful to you.