Free Expert Guides on Power Systems, Circuit Design & Electrical Troubleshooting

Protection measures for use of three-phase transformersThree-phase transformer may encounter various faults and abnormal working conditions during use, in order to ensure its safe and stable operation, a series of protective measures are usually taken. The following are several common protection measures for three-phase transformers according to the search results:Gas protectionGas protection is a protective measure used to reflect the internal failure of the transformer tank and the reduction o

The number and diameter of strands in a cable depend on the specific purpose of the cable, rated current, operating voltage, environmental conditions, and safety requirements.Method for determining the size of stranded wireCalculate current carrying capacity Current density: First determine the maximum current that the cable needs to carry. The required cross-sectional area is then calculated based on the material of the cable (such as copper or aluminum) and the allowable current density. Formu

Using a normal voltage regulator (such as a linear regulator) instead of a PWM (pulse width modulation) type charge controller for a solar panel to charge the battery at night is not feasible for the following reasons:Solar panels can't generate electricity at nightSolar panels rely on light to produce electricity. At night, without sunlight, solar panels cannot generate electricity. Therefore, no matter what type of charge controller is used, there is no way to obtain electricity from the solar

Application and characteristics of transformer oilTransformer oil is a mineral oil designed for transformers, and its main uses and characteristics are as follows:Use Insulation: transformer oil has a higher insulation strength than air, impregnated in the insulation material can improve its insulation performance, while preventing moisture erosion. Heat dissipation: transformer oil has a large specific heat capacity and is often used as a coolant. It ensures the normal operation of the transfor

If no current is flowing through the wire, then by definition there is no current in the wire. Current refers to the directional movement of electric charge, usually measured in amperes (A). When there is no current, it means that no charge is moving in a directional direction in the wire, so the strength of the current in the wire is zero.Why do you sometimes feel electricity?However, in practical applications, sometimes even if there is no current flowing through the wire, people may feel the

Related concepts Battery capacity and charging current: When the 12V battery is normally charged (non-fast charging), the current is 10%-20% of the battery capacity, and the best charging current is 10% of the battery capacity. For example, a common 12V60Ah battery has a charging current of 6A (60Ah×10%) 6. Power calculation: According to the formula P=UI (P is power,U is the voltage,I is current), power when a 12-volt battery is charged at 6A current twelve ,P=12V x 6A=72W.Second, the situation

Distribution network scale Line length and coverage: The longer the lines of the medium voltage distribution network and the larger the geographical area covered, the greater the workload of inspection, maintenance and troubleshooting required, and correspondingly more manpower is required. For example, if the total length of a city's medium-voltage distribution network reaches thousands of kilometers, covering multiple administrative districts, it may require dozens or even hundreds of workers

Dc voltage source short circuit definitionA DC voltage source short circuit means that the positive and negative electrodes of the voltage source are directly connected through a very low resistance path, resulting in the current flowing directly back to the power supply without passing through the load. A short circuit is a very serious condition that can lead to a variety of adverse consequences. The following are the possible consequences of a short circuit of a DC voltage source:Extreme curr

Advantages of using high voltage and low currentReduce transmission losses Resistance loss: According to Joule's law (P=I2R), the greater the current, the greater the resistance loss. Therefore, in the case of transmitting the same power, the use of high voltage and small current can significantly reduce the resistance loss. Wire size: The use of high voltage can reduce the current density in the wire, allowing the use of thinner wires and reducing material costs.Improve transmission efficiency

Thunderstorm generator definitionA thunderstorm generator is a device used to simulate lightning phenomena under thunderstorm weather conditions.Working principleA thunderstorm generator usually simulates the lightning discharge process by producing a high-voltage pulse. It can use the capacitor to discharge instantaneously after charging, or through other high-voltage discharge technology, to generate a strong electric field and current, so as to simulate the arc discharge and electromagnetic p