XTL-B3 Wind Turbine Generator
Key attributes
| Brand | Wone Store |
| Model NO. | XTL-B3 Wind Turbine Generator |
| Rated power | 1000W |
| Series | XTL |
Product descriptions from the supplier
Description
The XTL-B3 Wind Turbine Generator is an ISO, EU CE-certified renewable power solution. It operates safely in harsh climates (strong winds, extreme temps) with no special maintenance, ideal for villas, communication base stations, and wind-solar street lights. Sold to 60+ global markets, it delivers stable independent power while leveraging wind resources.
Unit characteristics
security：The main stress points of the blades are concentrated in the hub, so the problems of blade falling, fracture and blade flying out are well solved
Wind resistance：The horizontal rotation makes it less wind pressure and can resist super typhoons of 45 meters per second; The tail rudder adopts an automatic yaw design, with a folding tail type, which has stronger typhoon resistance
Turning radius：Due to its different design structure and operating principle, it has a smaller turning radius than other forms of wind power generation, saving space and improving efficiency
Power generation curve characteristics：The starting wind speed is lower than that of other forms of wind turbines, and the increase in power generation is relatively gentle, so in the range of 5~8 meters, its power generation is 10%~30% higher than that of other types of wind turbines
Brake device：The blades themselves have speed protection, and can be equipped with mechanical manual and electronic automatic brakes, and in areas without typhoons and super gusts, only manual brakes need to be set
Optimize design：The chassis is made of A3 steel, which is small in size, light in weight, beautiful in appearance, and low in operation. Flange installation, good strength, easy to install and maintain
High utilization coefficient：The reinforced FRP wind turbine blades, with optimized aerodynamic shape design and structural design, have low starting wind speed and high wind energy utilization coefficient, increasing the annual power generation
Good match：The use of permanent magnet rotor alternator for power generation effectively reduces the resistance torque of the generator, and at the same time, the use of wind turbines and generators has better matching characteristics, and the reliability of unit operation
Regulating current：It can be equipped with a high-power tracking intelligent controller to effectively adjust the current
Technical specifications:
Model |
XTL-B3-900 |
XTL-B3-1000 |
Rated power |
900W |
1000W |
Max power |
1000W |
1200W |
Nominal voltage |
24V/48V |
48V |
Start-up wind speed |
2.5m/s |
2.5m/s |
Rated wind speed |
12m/s |
12.5m/s |
Survival wind speed |
40m/s |
40m/s |
Top net weight |
26kg |
31kg |
Wind wheel diameter |
2.2m |
2.4m |
Number of blades |
3 tablets |
|
Blades material |
Reinforced FRP FRP strengthened |
|
Fuselage material |
Die-cast aluminum alloy |
|
Generator |
Three phase ac permanent magnet generator |
|
Controller system |
Electromagnet/wind wheel yaw |
|
Speed regulation |
The wind Angle automatically |
|
Working temperature |
-40℃～80℃ |
|
Related Products
Related Knowledges
-
How to Identify Internal Faults in a Transformer?Measure DC resistance: Use a bridge to measure the DC resistance of each high- and low-voltage winding. Check whether the resistance values among phases are balanced and consistent with the manufacturer’s original data. If phase resistance cannot be measured directly, line resistance may be measured instead. The DC resistance values can indicate whether the windings are intact, whether there are short circuits or open circuits, and whether the contact resistance of the tap changer is normal. IfFelix Spark11/04/2025 -
Front-Panel Visible Wiring Standards for Electrical Control PanelsFront-panel visible wiring: During manual wiring (not using templates or molds), wiring must be straight, neat, closely attached to the mounting surface, rationally routed, and with secure connections that facilitate maintenance. Wiring channels should be minimized as much as possible. Within the same channel, bottom-layer conductors shall be grouped by main and control circuits, arranged in a single-layer parallel dense layout or bundled, and kept closely attached to the mounting surface. ConduJames11/04/2025 -
What are the requirements for inspecting and maintaining a transformer's no-load tap changer?The tap changer operating handle shall be equipped with a protective cover. The flange at the handle shall be well sealed with no oil leakage. Locking screws shall securely fasten both the handle and the drive mechanism, and the handle rotation shall be smooth without binding. The position indicator on the handle shall be clear, accurate, and consistent with the tap voltage regulation range of the winding. Limit stops shall be provided at both extreme positions. The insulating cylinder of the tLeon11/04/2025 -
What Are the Common Inverter Fault Symptoms and Inspection Methods? A Complete GuideCommon inverter faults mainly include overcurrent, short circuit, ground fault, overvoltage, undervoltage, phase loss, overheating, overload, CPU malfunction, and communication errors. Modern inverters are equipped with comprehensive self-diagnostic, protection, and alarm functions. When any of these faults occurs, the inverter will immediately trigger an alarm or shut down automatically for protection, displaying a fault code or fault type. In most cases, the fault cause can be quickly identifiFelix Spark11/04/2025 -
What are the causes of dielectric withstand failure in vacuum circuit breakers?Causes of Dielectric Withstand Failure in Vacuum Circuit Breakers: Surface contamination: The product must be thoroughly cleaned before dielectric withstand testing to remove any dirt or contaminants.Dielectric withstand tests for circuit breakers include both power-frequency withstand voltage and lightning impulse withstand voltage. These tests must be performed separately for phase-to-phase and pole-to-pole (across the vacuum interrupter) configurations.Circuit breakers are recommended to be tFelix Spark11/04/2025 -
What Are the Top 10 Taboos and Precautions in the Installation of Distribution Boards and Cabinets?There are many taboos and problematic practices in the installation of distribution boards and cabinets that must be noted. Especially in certain areas, improper operations during installation may lead to serious consequences. For cases where the precautions were not followed, some corrective measures are also provided here to remedy previous mistakes. Let’s follow along and take a look at common installation taboos from manufacturers regarding distribution boxes and cabinets!1. Taboo: LightingJames11/04/2025
Related Solutions
-
Dedicated Vacuum Contactor Solution for Port Shore Power SystemsI. Background and ChallengesShore power systems have become core technical equipment for ports to reduce carbon emissions and noise pollution. However, these systems face two major challenges in the harsh operational environment of ports:Severe Environmental Corrosion: High humidity and salt spray in port areas cause serious corrosion to metal components and enclosures of electrical equipment, significantly impacting electrical lifespan and operational reliability.High Switching Requirements:Wone Store09/13/2025 -
ABB Vacuum Contactor KC2 Power Supply System Technical Transformation PlanIssue OverviewThe 10kV air compressor starting system of a company utilizes the ABB vacuum contactor KC2 as the control component for the operating circuit. The dedicated wide-voltage power supply module paired with this contactor presents the following issues:Frequent failures: The power supply module fails to properly transition the voltage from 300V to 12V, resulting in fuse blowouts.Poor heat dissipation: Enclosed installation of the module leads to insufficient heat dissipation, accelerWone Store09/13/2025 -
Solution for Medium-Voltage Motor Control and Protection Using Vacuum Contactor-Fuse (VCF) in a Coal Conveying System1.Project BackgroundA coal conveying system comprises 15 belt conveyors driven by medium-voltage motors. The system operates under complex conditions, with motors often subjected to heavy loads and frequent starts. To address these challenges and achieve effective control and reliable protection during motor startup, the project comprehensively adopts Vacuum Contactor-Fuse (VCF) combination devices for the 6kV medium-voltage motor power distribution. This solution details the technical features,Wone Store09/13/2025
