Tiny Resistance Tester

Power input

Rated voltage

AC 220V±10% 50Hz

Power Input

2-phase 3-wire

Display of Test Value

Five - digit display (maximum 19999 digits), LED

Measurement Range

10kΩ ~ 2.00kΩ (divided into eight test ranges)

Over - range Display

HIGH lamp, PASS lamp, LOW lamp. The sorting results are "Over - upper limit", "Qualified", "Under - lower limit"

Test Speed

10 ~ 15 times/second

Number of Sorting Gears

3 - gear sorting

Zero Calibration

The instrument has been calibrated for the zero base value of each range. When the zero base value changes due to various reasons,

 this function can be used to calibrate the instrument.

Range Selection (Range)

Auto 

Range

In the setting mode, it is a function key for selecting and setting parameters. It changes the measurement range during sorting test.

 During sorting measurement, the instrument will not automatically select the range. At this time, the "Range" key can be used to change the range.

 Press the "Range" keyboard once, the range increases by one gear. When in the 7th gear, the range changes to the first gear.

Hold

Selection range 1 - 5, corresponding to the range 200mΩ ~ 2kΩ (2511)

Selection range 1 - 7, corresponding to the range 200mΩ ~ 200kΩ (2512)

Selection range 1 - 8, corresponding to the range 20mΩ ~ 200kΩ (2512A)

Selection range 1 - 9, corresponding to the range 20mΩ ~ 2MΩ (2512B) (with signal output interface)

Operating temperature

-10℃-50℃