GYAR9 Wifi Smart Auto Recloser Self-recovery PV Special Reclosing Actuator
Atributti Mportanti
| Marke | Switchgear parts |
| Numru tal-Model | GYAR9 Wifi Smart Auto Recloser Self-recovery PV Special Reclosing Actuator |
| Tal-Maxx ta' Voltiġi | AC220V |
| Rated frequency | 50/60Hz |
| Siri | GYAR9 |
Descrizjonijiet tal-prodott mill-fornitur
GYAR9 Smart Auto Recloser kompatibbli ma’ Schneider Electric A9 series air opening IC65N miniature circuit breaker. Intelligently upgrade the circuit breaker (without affecting the circuit breaker itself). It can be remotely controlled by MODBUS 485 for automatic closing and opening, have overload protection and short circuit protection functions, and have parameterized and configurable functions which can be automatically judged by MCU, realizing the function of opening the circuit breaker when power outage and automatically closing when power on. Currently widely used in photovoltaic grid-connected AC distribution boxes, as well as the following occasions, including places that are difficult for personnel to access, places where maintenance personnel cannot be in place in time, unattended occasions, and places with high requirements for power supply continuity.
Standard：EN 50155,GB/T 24338.4-2018,EN 45545-2,IEC 61373
Control Signal：MODBUS-RS485 Wet node 230V high level/pulse signal (optional)
Over&Under Voltage Function：160-270V±5V (Optional)
Effective Control Signal Duration：>400ms
Closing Action Time：<1s
Opening Action Time：<0.5s
Control Circuit Cable Length：≤1500m
Note:At present, there are only reclosing, switch control, and RS485 functions. The Wi-Fi function will be developed later.
Key Features of the GYAR9 Smart Auto Recloser：
Visual voltage display:Visual voltage display makes it easier for maintenance personnel to judge the circuit during maintenance.
LOCK Padlock Device:Equipped with a LOCK padlock device to achieve a double protection mechanism and provide additional protection for circuit maintenance.
MODBUS 485:Supports MODBUS 485 remote communication function to remotely understand the working status of the device.
Local Operation Fault Storage:Supports local operation fault storage, and when the remote communication function is restored, the device data can be read.
Remote Automatic Mode:Remote automatic mode can operate safely and efficiently based on MCU self- test.
Product model :
| Model | Taljen Volt | Funkzjonijiet | Aġġornamenti Opzjonali |
| GYAR9-AC-G | CA 220V | Auto Reclosing+Dry Contact Control | Display Digitali |
| GYAR9-AC-S | CA 220V | Auto Reclosing+Wet Contact Control | Display Digitali |
| GYAR9-AC-RS | CA 220V | Auto Reclosing+RS485 Control | Display Digitali bil-Timing |
| GYAR9-AC-UV | CA 220V | Protezzjoni ta' volt tal-baħar u tal-fuq tas-silġ f'auto-rigenerazzjoni | Display Digitali |
| GYAR9-AC-PV | CA 220V | Fotovoltaika/spalancament b'potenza spezza/chiusura b'potenza su | Display Digitali |
| GYAR9-DC-RS | CC 48V | Auto Reclosing+RS485 Control | Display Digitali bil-Timing |
Osservazzjonijiet: Il-GYAR9 Smart Auto Recloser tista' tiġi adattata għal l-Acti9 iC65 miniature circuit breaker, u jistgħu wkoll jiġu kostumizzati u adattati circuit breakers ta' produttori oħra bl-isstruttura C65. Il-lunghezz tal-operatur manwel tista' tiktebba skond it-talbiet tal-utent, u tista' tkun konfigurata ma' 1P-4P circuit breakers.
Noti dwar l-Użu:
Jista' jkun hemm riskju ta' šok elektriku, esplożjoni jew xarab tan-nar mill-ark
Assicurajtkom li qassamu kollox is-sorsijiet tal-enerġija qabel li tivvjaġġaw l-ekkipament.
Użu elektroskop b'rating tal-volttagġ apropriat biex tikkonferma li kollox il-konduċturi mhux miftuhin.
Il-falz tat-talbiet hawn fuq se jiġi rreżultat fil-ix-xewqa personali jew fil-mewt.
| Standard | EN 50155,GB/T 24338.4-2018,EN 45545-2,IEC 61373 |
| Adaption | Acti9 Series 1P-4 |
| Electrical Characteristics | |
| Operating Voltage | 230V AC (70%~125%) 24-48V DC (optional) |
| Control signal | MODBUS-RS485 Wet node 230V high level/pulse signal (optional) |
| Over&under voltage function | 160-270V±5V (Optional) |
| Timing function | Available (optional) |
| Digital display | 3-digit voltage,switching times,fault status |
| Effective control signal duration | ＞400ms |
| Closing action time | ＜1s |
| Opening action time | ＜0.5s |
| Control circuit cable length | ≤1500m |
| Current-carrying capacity of auxiliary contacts(terminals 8-9-10) | 1CO,minimum operating current 3mA(24VDC)(resistive)(optional) |
| Current-carrying capacity of signaling contacts(terminals 5-6-7) | Maximum operating current 2A(30V DC),0.5A(125V AC)(optional) |
| Power consumption | ≤1.5VA（Static）；≤25VA（dynamic） |
| Rated insulation voltage | 400V |
| Rated impulse withstand voltage uimp | |
| (between S2C-RM DC and MCB） | 4kV（4.9kV at sea level） |
| Self-locking protection | Within 10s of 3CO/20s of 4CO/30s of 6CO，the product will self-lock and recover automatically after 40s. |
| Electrical life | 10000 times,3 times/minute |
| Mechanical Characteristics | |
| Indicator Light | Green,Normal status |
| Red,MCB overcurrent fault | |
| Auto/Manual switching | Auto Remote control of opening&closing available |
| Manual Remote control of opening&closing disabled | |
| Mechanical life | 10000 |
| Protection class | Ip20 |
| Hazard class according to EN 45545-2 | EN 45545-2 R26/HL3 |
| Shock and vibration resistance According to IEC 61373 | category 1-class A/B-body mounted |
| Resistance to heat and humidity IEC/EN 60068-2-30 | 28 cycles（55℃/90-96%，25℃/95-100%） |
| Ambient Temperature | -25..+70℃ |
| Storage Temperature | -40…+70℃ |
| Installation and Wiring | |
| Power and control signal terminal wiring capacity | 28-12AWG 2.5mm² |
| Auxiliary signal terminal wiring capacity | 28-14AWG 1.5mm² |
| DIN rail mounting | DIN rail EN 60715（35mm） |
| Mounting position | Mounting on DIN rail Any position |
Prodotti Relatati
Il-Kunċetti Relatati
-
Trasformaturi tal-Ġrudament Intelligenza għal Support tal-Grid tal-Gżira1. Kontext tal-ProġettIl-proġetti ta' fotovoltaiku distributivi u tixxena ta' energija qed jivvisslu rapidament f'Vietnam u fl-Asia t'Sud, imma huma qisgħu sfidi konsiderabbli:1.1 Instabilità tal-Grid:Il-grid tal-enerġija tal-Vietnam jikseb varjazzjonijiet frekwenzji (speċjalment fil-zones industriali tal-pjedmont). Fl-2023, il-miskinanza ta' potenza tal-anġas tal-kulħan lura blackouts suġġenżi, li wasslu għal perditi ġurnalieri akbar minn 5 miljun USD. Is-sistemi tradizzjonali ta' fotovoltaiku12/18/2025 -
Proċeduri għal Provi ta' Kommissjonament għal Trasformaturi tal-Elettricità Immeżġa fil-LanġasProċeduri u Rekwiżiti għal Prova tal-Transformer1. Provi tat-Tapp tal-Non-Porċellana1.1 Reżistanza tal-InsulazzjoniIkkonfigura t-tapp vertikali permezz ta' gru jew struttura tas-sostegnu. Immisra l-reżistanza tal-insulazzji bejn it-terminal u t-tap/french permezz ta' megohmmeter ta' 2500V. Il-valuri misurati għandhom mhux jidifferenzjaw b'mod sostanzjali mill-valuri ta' fabrika taħt kundizzjonijiet ambientali similari. Għat-tapp kapasitivi ta' 66kV jew akbar meħtieġa prova tal-reżistanza tal- in12/17/2025 -
Standards ta’ Kwalità għal l-Ixkilib tar-Trasformaturi tal-ElettricitàIspezzjoni u Rekwiżiti għall-Addobb tal-Core tal-Transformer Il-core tal-ħadid għandu tkun mitlaq b'manella tal-izolazzjoni sana, lami tal-ħadid magħmula tajjeb, u l-ġilbien tal-lamina tas-silġ ta' l-ħadid għandhom jkunu mhux mwaħħlin jew imwaħħlin. Kull surfata tal-core għandha tkun libba minn Żejt, ftitx, u impurità. Ma għandhom ma jkunu xi short circuits jew bridging bejn il-laminations, u l-gaps tal-ġwiejg għandhom jissodisfaw is-speċifikazzjonijiet. Għandu jiżomm izolazzjoni tajba bejn il-c12/17/2025 -
Trasformaturi tal-Elettricità: Risks ta' Short Circuit, Kausi, u Misuri ta' MigborTransformatori ta' l-Elettricità: Riskji, Kausi u Misuri ta' Migwad għal Short CircuitIl-transformatori ta' l-elettricità huma komponenti fundamentali fis-sistemi tal-elettricità li jipprovdu t-tneħħija tal-enerġija u huma dispożitivi induktivi essenzjali biex isiguraw l-operazzjoni sagra tal-elettricità. Il-structura tagħhom tikkonsisti minn spire primarji, spire sekondarji, u qalb tal-ħadid, fehren użu mill-prinċipju tal-indukzjoni elettromagnetika biex jmodifikaw il-volttalj tas-silġ alternat12/17/2025 -
8 Mira t’Inħallaċ il-Disċarġa Parzjali f’tal-Transformaturi tal-ElettricitàIl-ħtieġa li tinqas u s-sistema tal-ħlief ta’ trasformaturi tal-kurrent elektromagnetiku u l-funzjoni tal-ħliefaFl-aħħar żmien, il-mibnija tal-grigi tal-kurrent elektromagnetiku u l-żid fl-voltatt relat għal trasport inkrementat il-domanda għall-affidabilità tal-mixja mill-grigi tal-kurrent elektromagnetiku u l-utenti tal-kurrent elektromagnetiku. Milli l-prova tal-ħtieġa parzjali ma tgħadix mixja waqt li tkun soċjabbil mhux invaziva, huwa possibbli li jiġi rilevatax difetti inerenti fil-mixja t12/17/2025 -
Requisiti Ġenerali u Funzjonijiet tal-Systems ta' Raffreddament tal-Transformer ElettrikuRequisiti Ġenerali għall-Systems ta' Raffreddament tal-Transformer tal-Elettricità Kulħadd minn dispożitivi ta' raffreddament għandu jiġi installat skont is-speċifikazzjonijiet tal-manifatturier; Is-sistema ta' raffreddament mal-ċirkolazzjoni forzata ta' l-oli għandha tikkun fih sors tas-silġ indipendenti b'modda ta' swittjar awtomatika. Meta s-sors tas-silġ li qed jitgħallem tfaillel, il-sors tas-silġ tal-backup għandu jinċetta awtomatikament waqt li jemittu segnali audibili u vizzivili; Għal t12/17/2025
