Arc-proof Air-insulated Switchgear for Primary Distribution 12kV 630...2000A 25kA
Key attributes
| Brand | ABB |
| Model NO. | Arc-proof Air-insulated Switchgear for Primary Distribution 12kV 630...2000A 25kA |
| Rated voltage | 12kV |
| Rated frequency | 50/60Hz |
| Series | LeanGear ZS9 |
Product descriptions from the supplier
Description：
LeanGear ZS9 is an arc-proof air-insulated switchgear designed to meet space requirements and ratings of low electrical distribution grids.
It offers optimal safety and reliability standards, consistent with the ABB’s UniGear range of switchgear. With a proven robustness and flexibility, the LeanGear ZS9 is tested for tropical conditions.
Main benefits：
- Safety: Increased safety level assured by integrated ducting system against effects of internal arc.
- Security: Comprehensive interlocks provide optimum protection for both personnel and equipment.
- Space: Maximum functionality in a compact design with reduced footprint and height.
- Service: Ease of service and operation by personnel as switchgear and cable termination height are ergonomically designed.
- Speed: Minimal service downtime attributable to modular circuit breaker design and built-in features that eliminate use of special handling tools.
- Strength: Robust panel structure that is proven against external mechanical impacts.
Main features：
- Type-tested to IEC standard by STL lab.
- Internal arc classification IAC AFLR 25kA 1s.
- Classified as LSC2B, PM.
- Up to 1250A, proven for severe climatic conditions compliant to IEC 62271-304 Class 2.
- CB racking with closed door.
- Cable termination height of 700 mm.
- IP4X degree of protection.
- Extensible on both sides.
- Integrate with ABB Relion® series relay for protection and control.
- For Higher Altitude contact ABB.
VInd/L circuit breaker:
- Floor-rolling circuit breaker.
- Suitable for E2, M2, and C2 endurance class application.
- Integral spring charging handle.
- Built-in mechanical anti-pumping device.
Single line diagram of typical units：
Typical feeder unit：
A: Circuit breaker compartment
B: Busbar compartment
C: Cable compartment
D: Low voltage compartment
E: Integral panel gas duct
Public.
LeanGear ZS9 Arc-proof Air-insulated Switchgear for Primary Distribution
Catalogue
English
Q: What support and services does ABB provide for installation, commissioning, and after-sales maintenance?
A:
ABB provides comprehensive support services including installation, commissioning, and after-sales maintenance. Our team of experts ensures smooth deployment and ongoing support to maximize the performance and longevity of our switchgear products.
Q: What smart solutions are available for ABB’s AIS portfolio?
A:
ABB’s switchgear smart solutions are designed to help our customers make data-driven decisions. Our customers can benefit from a wide range monitoring, diagnostic, automation and control features for their ABB’s air-insulated medium voltage switchgear. Contact our sales team to learn more about ABB’s smart solutions for each of our switchgear.
Online store
On-time delivery rate
Response time
100.0%
≤4h
Company overview
Workplace: 20000m²
Total staff:
Highest Annual Export(usD): 580000000
Services
Business Type: Sales
Main Categories: High Voltage Electrical Apparatus/Low Voltage Electrical Apparatus
Whole life care manager
Whole-life care management services for equipment procurement, use, maintenance, and after-sales, ensuring safe operation of electrical equipment, continuous control, and worry-free electricity consumption.
The equipment supplier has passed platform qualification certification and technical evaluation, ensuring compliance, professionalism, and reliability from the source.
Related Products
-
12kV 24kV 36kV Pure air/Nitrogen Insulated Ring Main Unit(RMU) Ensuring Stable Power
-
35kV Maintenance-Free N2 insulated switchgear ensuring Stable Power
-
24kV Maintenance-Free zero gas switchgear
-
Maintenance-Free Environmental Protection no gas Ring Network Cabinet
-
Intelligent environmentally friendly gas insulated ring network cabinet
-
Maintenance-Free solid insulated switchgear Ensuring Stable Power
-
40.5kV Solid Insulated Switchgear/ Ring Main Unit
Related Knowledges
-
How to Identify Internal Faults in a Transformer?Measure DC resistance: Use a bridge to measure the DC resistance of each high- and low-voltage winding. Check whether the resistance values among phases are balanced and consistent with the manufacturer’s original data. If phase resistance cannot be measured directly, line resistance may be measured instead. The DC resistance values can indicate whether the windings are intact, whether there are short circuits or open circuits, and whether the contact resistance of the tap changer is normal. IfFelix Spark11/04/2025 -
Front-Panel Visible Wiring Standards for Electrical Control PanelsFront-panel visible wiring: During manual wiring (not using templates or molds), wiring must be straight, neat, closely attached to the mounting surface, rationally routed, and with secure connections that facilitate maintenance. Wiring channels should be minimized as much as possible. Within the same channel, bottom-layer conductors shall be grouped by main and control circuits, arranged in a single-layer parallel dense layout or bundled, and kept closely attached to the mounting surface. ConduJames11/04/2025 -
What are the requirements for inspecting and maintaining a transformer's no-load tap changer?The tap changer operating handle shall be equipped with a protective cover. The flange at the handle shall be well sealed with no oil leakage. Locking screws shall securely fasten both the handle and the drive mechanism, and the handle rotation shall be smooth without binding. The position indicator on the handle shall be clear, accurate, and consistent with the tap voltage regulation range of the winding. Limit stops shall be provided at both extreme positions. The insulating cylinder of the tLeon11/04/2025 -
What Are the Common Inverter Fault Symptoms and Inspection Methods? A Complete GuideCommon inverter faults mainly include overcurrent, short circuit, ground fault, overvoltage, undervoltage, phase loss, overheating, overload, CPU malfunction, and communication errors. Modern inverters are equipped with comprehensive self-diagnostic, protection, and alarm functions. When any of these faults occurs, the inverter will immediately trigger an alarm or shut down automatically for protection, displaying a fault code or fault type. In most cases, the fault cause can be quickly identifiFelix Spark11/04/2025 -
What are the causes of dielectric withstand failure in vacuum circuit breakers?Causes of Dielectric Withstand Failure in Vacuum Circuit Breakers: Surface contamination: The product must be thoroughly cleaned before dielectric withstand testing to remove any dirt or contaminants.Dielectric withstand tests for circuit breakers include both power-frequency withstand voltage and lightning impulse withstand voltage. These tests must be performed separately for phase-to-phase and pole-to-pole (across the vacuum interrupter) configurations.Circuit breakers are recommended to be tFelix Spark11/04/2025 -
What Are the Top 10 Taboos and Precautions in the Installation of Distribution Boards and Cabinets?There are many taboos and problematic practices in the installation of distribution boards and cabinets that must be noted. Especially in certain areas, improper operations during installation may lead to serious consequences. For cases where the precautions were not followed, some corrective measures are also provided here to remedy previous mistakes. Let’s follow along and take a look at common installation taboos from manufacturers regarding distribution boxes and cabinets!1. Taboo: LightingJames11/04/2025
Related Solutions
-
Electrical House (eHouse) SolutionsReduce site complexity, improve lead timeABB eHouses are prefabricated transportable substations, designed to house medium voltage and low voltage switchgear, critical power equipment and automation cabinets.An eHouse solution is a cost effective, risk reduced alternative to conventional concrete block and brick construction. Each eHouse module is custom engineered to meet application requirements with respect to equipment layout, site footprint limitations and logistics considerations.InstallatABB04/16/2025 -
Improve speed to deployment Modular prefabricated and pre-engineered solutionsReduce site works and risk of schedule delays and cost overrunsOverview：With a complicated data center project that has short delivery timelines, prefabricated modular solutions and pre-engineered modular solutions may be the answer.Modular solutions are ideal for enterprise, colocation, edge and cloud data centers, where project replicability and expandability are critical, alongside fast deployment time.Reduce risk by leveraging prefabricated and integrated solutions:Fast track projects with pABB04/16/2025
Haven't found the right supplier yet? Let matching verified suppliers find you.
Get Quotation Now
Send inquiry
Download
Get the IEE Business Application
Use the IEE-Business app to find equipment, obtain solutions, connect with experts, and participate in industry collaboration anytime, anywhere—fully supporting the development of your power projects and business.
