| Brand | RW Energy |
| Model NO. | 60KW DC fast charging station |
| Rated Output Rating | 60kW |
| Output Voltage | DC 200-1000V |
| Max Output Current | 200A |
| Power Conversion Efficiency | ≥95% |
| Connector Options | GBT+CCS2+CHAdeMO |
| Cable Length | 5m |
| Input Voltage | 380V |
| Series | DC EV Chargers |
Description：
This DC fast charging station supports mainstream charging standards including CCS1, CCS2, CHAdeMO, GBT, and Tesla, allowing flexible customization and combination to achieve full compatibility with all electric vehicle brands. Whether it's CCS fast-charging models in the European and American markets, Japanese CHAdeMO protocol vehicles, Chinese GBT standard vehicles, or Tesla's entire lineup, all can be charged instantly upon plugging in.
Key Features:
Multi-Standard Compatibility: Resolves charging interface differences across brands and regions in one go, eliminating the need for additional adapters.
Flexible Customization: Supports free combination of single or multiple standard modules to suit diverse scenarios such as commercial operations, highway rest areas, and community charging stations.
High-Efficiency Fast Charging: With a maximum output power of 350kW, it can charge a vehicle from 10% to 80% in just 30 minutes.
Intelligent Management: Integrated smart monitoring system for real-time tracking of charging status, power distribution, and device health, supporting remote operation and maintenance.
Safe & Reliable: Equipped with overvoltage/overcurrent protection, leakage monitoring, and temperature control systems to ensure safe and stable charging throughout the process.
Technical Parameters：
Is the DC fast charging station a specific implementation of leakage protection?
Specific implementation of leakage protection：
Hardware level：Residual current device: Install a residual current device inside the charging station. When the leakage current detected exceeds the set threshold, the power supply is automatically cut off.
Current transformer: Install a current transformer inside the charging cable or charger to monitor current changes in real time. Once abnormal current is detected, the protection action is triggered.
Ground fault protection: Integrate a GFCI inside the charging station to detect ground faults and cut off the power supply.
Software level：
Fault detection algorithm: Monitor the change of current through software algorithms. When abnormal current is detected, the system will issue an alarm and cut off the power supply.
Real-time monitoring: Monitor parameters such as current and voltage during the charging process in real time. Once an abnormality is found, protection measures are taken.
-
Strange Devices on Transmission Lines: 5 Little-Known Practical Functions（1）1 Aviation Warning SpheresAviation warning spheres, also known as reflective safety spheres, are used on overhead transmission lines near airports, especially on extra-high-voltage (above 220kV) lines and river-crossing transmission lines. Highly visible aviation marker spheres (aviation warning spheres) must be installed along the lines to provide warning signals.The aviation marker sphere (aviation warning sphere) has a diameter of ф=600mm. The sphere can be manufactured in various bright coloLeon09/04/2025 -
Transmission LineIn transmission lines, a "π" connection involves breaking the original line from Substation A to Substation B and inserting Substation C, forming a "π" configuration. After the "π" connection, the original single line is divided into two independent transmission lines. Following the "π" connection, Substations B and C may both be powered by Substation A (in this case, Substation C receives power via a feeder from Substation B's busbar, or possibly from another voltage point within Substation B);Encyclopedia09/04/2025 -
What are the principles of forced re-energization of transmission lines?Principles of Forced Re-energization of Transmission LinesRegulations for Forced Re-energization of Transmission Lines Correctly select the forced re-energization end of the line. If necessary, change the connection configuration before forced re-energization, taking into account the reduction of short-circuit capacity and its impact on grid stability. There must be a transformer with its neutral point directly grounded on the busbar at the forced re-energization end. Pay attention to the impactEdwiin09/04/2025 -
Analysis of Accident Handling in Transmission LinesAnalysis of Transmission Line Fault HandlingAs a fundamental component of the power grid, transmission lines are widely distributed and numerous, often exposed to diverse geographical and climatic conditions, making them highly susceptible to faults. Common causes include overvoltage, pollution flashover, insulation damage, tree encroachment, and external damage. Line tripping is one of the most frequent faults in power plant and substation operations, with fault types including single-phase-to-Leon09/04/2025 -
The difference between transmission and distribution linesTransmission lines and distribution lines are both used to carry electrical power from one location to another. However, they differ significantly in key aspects such as primary function, voltage levels, phase configuration, and conductor placement. These differences are essential for understanding their distinct roles in the power system.The Difference Between Transmission and Distribution Line is given below in the tabulated form.Electricity generation is a critical component of the power systEdwiin09/04/2025 -
Ensuring Reliability: A Deep Dive into Transformer MaintenanceIntroductionElectric transformers are the backbone of modern power distribution systems, silently enabling the reliable delivery of electricity to homes, businesses, and industries. As these critical assets age and the demand for uninterrupted power grows, the importance of diligent transformer maintenance has never been greater. This essay explores the essential role of transformer maintenance, highlighting the value of proactive care, the impact of advanced diagnostic technologies, and the traVziman09/03/2025
-
Distribution automation systems solutionsWhat are the difficulties in overhead line operation and maintenance?Difficulty one:Overhead lines of distribution network have wide coverage,complicatedterrain,many radiation branches and distributed power supply,resultingin "many line faults and difficulty in fault troubleshooting".Difficulty Two:Manual troubleshooting is time-consuming and laborious.Meanwhile,therunning current,voltage and switching state of the line cannot be graspedin real time,because of the lack of intelligent technical mRW Energy04/22/2025 -
Interference Generated by Frequency Converters and SolutionsA frequency converter is a device used to adjust the speed and voltage of an electric motor by changing the motor's supply frequency to achieve speed control. However, during operation, frequency converters generate some interference that can negatively impact other electronic equipment and the power grid. Therefore, it's necessary to adopt solutions to mitigate this interference.Electromagnetic Interference (EMI): When adjusting the motor's supply frequency, frequency converters generate higRW Energy08/21/2025
