| Brand | ROCKWILL |
| Model NO. | 10kV 24kV 35kV 69kV Compact Power Distribution Unit Pad Mounted Capacitor Bank Prefabricated Outdoor Substation |
| Rated voltage | 11kV |
| Rated frequency | 50/60Hz |
| Series | ZGS |
Descripton
ZGS installed substation is made of American box changed. The product as the cable of distribution network power supply unit, high voltage control, protection, substation, as well as the power distribution equipment in one of the sets of pre products, widely used in urban and rural distribution network.The product will be high voltage load switch, high voltage fuse in the transformer oil, with a total of two kinds of structural forms of the transformer box body or box.
Tank using full sealed structure, with the oil temperature gauge, oil level gauge, pressure gauge, pressure release valve, drain valve etc. element to monitoring transformer operation status. The product is divided into ring network, terminal type and power supply mode. In order to make this product is more suitable for the actual requirements of the power grid in China, company and push the plug type fuse, fuse fuse does not affect the performance of transformer oil. According to the low voltage feed to the complexity of the, ZBW-12/0.4 products points to strengthen the standard type, type and comprehensive type three shell form, users and design units in the selection. Do more flexible and more economic.
Product Features and Structure
- Application and Structure: The ZBW prefabricated substation, also known as an "American box-type substation," uses a fully sealed structure to ensure environmental resilience. The transformer section integrates a high-voltage load switch and high-voltage fuse in transformer oil, providing reliable protection without compromising transformer oil quality.
- High-Voltage Components: Equipped with a high-voltage load switch, high-voltage fuses, and connection options for both ring network and terminal configurations, the substation meets diverse distribution network requirements with flexibility and safety.
- Monitoring and Maintenance: The substation tank includes indicators for oil temperature, oil level, pressure, and pressure relief, ensuring effective monitoring of transformer status.
- Shell Construction: The robust shell is manufactured from high-strength materials with anti-corrosion treatment, providing protection against harsh weather. This makes the substation ideal for outdoor installation with long service life.
Technical Parameters
Technical Specifications
- Rated Voltage: 10/0.4 kV (high and low voltage sides)
- High-Voltage Side Rated Voltage: 10kV or 12kV
- Low-Voltage Side Rated Voltage: 0.4kV
- Frequency: 50 Hz
- Protection Grade: IP3X
- Noise Level: ≤50 dB
The substation supports various high-voltage rated withstand voltages and impulse withstand levels for increased safety and reliability in the field.
Environmental Suitability
The ZBW prefabricated substation is designed to operate effectively in environments with temperatures ranging from -30°C to +40°C, altitudes up to 1000m, and humidity up to 95%. Its construction is highly resistant to corrosion, seismic activity, and other environmental stresses.
Construction Requirements
The foundation of the substation is designed to meet a minimum load-bearing capacity of 100 kPa and includes a drainage system and protective grounding with grounding resistance ≤ 4 ohms.
(Updated2025.March.5th)
-
Strange Devices on Transmission Lines: 5 Little-Known Practical Functions（1）1 Aviation Warning SpheresAviation warning spheres, also known as reflective safety spheres, are used on overhead transmission lines near airports, especially on extra-high-voltage (above 220kV) lines and river-crossing transmission lines. Highly visible aviation marker spheres (aviation warning spheres) must be installed along the lines to provide warning signals.The aviation marker sphere (aviation warning sphere) has a diameter of ф=600mm. The sphere can be manufactured in various bright coloLeon09/04/2025 -
Transmission LineIn transmission lines, a "π" connection involves breaking the original line from Substation A to Substation B and inserting Substation C, forming a "π" configuration. After the "π" connection, the original single line is divided into two independent transmission lines. Following the "π" connection, Substations B and C may both be powered by Substation A (in this case, Substation C receives power via a feeder from Substation B's busbar, or possibly from another voltage point within Substation B);Encyclopedia09/04/2025 -
What are the principles of forced re-energization of transmission lines?Principles of Forced Re-energization of Transmission LinesRegulations for Forced Re-energization of Transmission Lines Correctly select the forced re-energization end of the line. If necessary, change the connection configuration before forced re-energization, taking into account the reduction of short-circuit capacity and its impact on grid stability. There must be a transformer with its neutral point directly grounded on the busbar at the forced re-energization end. Pay attention to the impactEdwiin09/04/2025 -
Analysis of Accident Handling in Transmission LinesAnalysis of Transmission Line Fault HandlingAs a fundamental component of the power grid, transmission lines are widely distributed and numerous, often exposed to diverse geographical and climatic conditions, making them highly susceptible to faults. Common causes include overvoltage, pollution flashover, insulation damage, tree encroachment, and external damage. Line tripping is one of the most frequent faults in power plant and substation operations, with fault types including single-phase-to-Leon09/04/2025 -
The difference between transmission and distribution linesTransmission lines and distribution lines are both used to carry electrical power from one location to another. However, they differ significantly in key aspects such as primary function, voltage levels, phase configuration, and conductor placement. These differences are essential for understanding their distinct roles in the power system.The Difference Between Transmission and Distribution Line is given below in the tabulated form.Electricity generation is a critical component of the power systEdwiin09/04/2025 -
Ensuring Reliability: A Deep Dive into Transformer MaintenanceIntroductionElectric transformers are the backbone of modern power distribution systems, silently enabling the reliable delivery of electricity to homes, businesses, and industries. As these critical assets age and the demand for uninterrupted power grows, the importance of diligent transformer maintenance has never been greater. This essay explores the essential role of transformer maintenance, highlighting the value of proactive care, the impact of advanced diagnostic technologies, and the traVziman09/03/2025
-
Intelligent Operation Solution for 12kV Vacuum Circuit Breakers: Integrating Real-time Monitoring & Lifetime OptimizationⅠ. Equipment Operation & MaintenanceIntelligent Monitoring System IntegrationMulti-parameter Real-time Monitoring: Embedded sensors (temperature, displacement, Hall effect current sensors) track contact temperature rise, mechanical characteristics (opening/closing speed, overtravel), coil current, and partial discharge signals. Data undergoes preprocessing via edge computing prior to cloud upload.Lifetime Prediction Model: Dynamically evaluates remaining lifespan using electrical wear dataRockwill06/10/2025 -
SF6 Circuit Breaker Solutions for Outdoor Installation (Anti-Pollution & Seismic Resistance)I.Core Challenges in Outdoor InstallationIn high-voltage transmission and distribution systems, SF6 circuit breakers are exposed to complex outdoor environments for extended periods, facing the following critical issues:Pollution & Insulation DegradationDust, salt fog, and industrial pollutants in outdoor environments easily adhere to equipment surfaces. In coastal or industrial areas, pollution levels may reach Class IV, resulting in insufficient creepage distance and triggering flashoRockwill05/12/2025
