• Product
  • Suppliers
  • Manufacturers
  • Solutions
  • Free tools
  • Knowledges
  • Experts
  • Communities
Search


How is the application of dimethyl silicone oil in transformers?

Encyclopedia
Encyclopedia
Field: Encyclopedia
0
China

The application of dimethyl silicone oil in transformers is mainly reflected in the following aspects:

Electrical Insulation Medium

Dimethyl silicone oil is widely used as an electrical insulating medium in transformers. Although its electrical properties are not superior to those of general insulating oils, it has the advantages of a wide range of viscosities, good thermal stability, oxidation resistance, low dielectric loss, low freezing point and vapor pressure, high flash and fire points. These characteristics enable dimethyl silicone oil to maintain good dielectric performance over a wide range of temperatures and frequencies.

Cooling Insulating Medium

Dimethyl silicone oil can be used as a transformer cooling and insulating medium. Compared with traditional mineral oil, dimethyl silicone oil has higher safety, is not easy to burn, and is non-toxic. Although the price of dimethyl silicone oil is higher, due to its excellent performance and safety, it has been more and more commonly used in transformers in recent years. In particular, dimethyl silicone oil transformers are widely used in high-rise buildings, residential areas, schools, factories, and key departments with special requirements.

Silicone oil for transformers

China has already developed silicone oil for transformers in the 1980s. The transformers made from this silicone oil have been running safely in departments such as Beijing Subway for many years to date. With the miniaturization of transformer design, the use of silicone oil can be greatly reduced, thereby reducing production costs. Therefore, dimethyl silicone oil is increasingly used to replace mineral oil as electrical insulating oil.

Summary

In summary, the application of dimethyl silicone oil in transformers is mainly reflected in its advantages as an electrical insulating medium and cooling insulating medium. Its excellent performance and safety make it an important material in the field of transformers. Although the price is relatively high, due to the safety and performance improvement it brings, the application prospect of dimethyl silicone oil in transformers is still broad.


Give a tip and encourage the author!
Recommended
Toroidal vs Square Transformers: Key Differences
Toroidal vs Square Transformers: Key Differences
What Is a Toroidal Transformer?A toroidal transformer is a major type of electronic transformer that has been widely used in household appliances and other electronic equipment with higher technical requirements. Its primary applications are as a power transformer and an isolation transformer. Abroad, toroidal transformers are already available in complete series and are extensively used in computers, medical equipment, telecommunications, instruments, and lighting applications.In China, toroida
Dyson
11/06/2025
What causes a transformer to be noisier under no-load conditions?
What causes a transformer to be noisier under no-load conditions?
When a transformer is operating under no-load conditions, it often produces louder noise than under full load. The primary reason is that, with no load on the secondary winding, the primary voltage tends to be slightly higher than nominal. For example, while the rated voltage is typically 10 kV, the actual no-load voltage may reach around 10.5 kV.This elevated voltage increases the magnetic flux density (B) in the core. According to the formula:B = 45 × Et / S(where Et is the designed volts-per-
Noah
11/05/2025
Under what circumstances should an arc suppression coil be taken out of service when it is installed?
Under what circumstances should an arc suppression coil be taken out of service when it is installed?
When installing an arc suppression coil, it is important to identify the conditions under which the coil should be taken out of service. The arc suppression coil should be disconnected under the following circumstances: When a transformer is being de-energized, the neutral-point disconnector must be opened first before performing any switching operations on the transformer. The energizing sequence is the reverse: the neutral-point disconnector should be closed only after the transformer is energ
Echo
11/05/2025
What fire prevention measures are available for power transformer failures?
What fire prevention measures are available for power transformer failures?
Failures in power transformers are commonly caused by severe overload operation, short circuits due to winding insulation degradation, aging of transformer oil, excessive contact resistance at connections or tap changers, failure of high- or low-voltage fuses to operate during external short circuits, core damage, internal arcing in oil, and lightning strikes.Since transformers are filled with insulating oil, fires can have severe consequences—ranging from oil spraying and ignition to, in extrem
Noah
11/05/2025
Related Products
Send inquiry
Download
Get the IEE Business Application
Use the IEE-Business app to find equipment, obtain solutions, connect with experts, and participate in industry collaboration anytime, anywhere—fully supporting the development of your power projects and business.