Aiki na ƙarin Transformer: Kyakkyawan Yawan Aiki da Takaice a Cikin Ƙarfin Transformer Da Dadi
1. Integrated Design & Protection Features of American-Style Pad-Mounted Transformers
1.1 Integrated Design Architecture
Amerika-styled pad-mounted transformers na yi kaɗauƙi a cikin kasa daban-daban da suka samu muhimmanci - core, windings, high-voltage load switch, fuses, arresters - a cikin kasa daya, tare da transformer oil ya zama insulation da coolant. Bashar ta shi sun hada da biyu:
- Babban Section:High & Low Voltage Operation Compartment (da elbow plug-in connectors mai yin live-front operation).
- Burum Section:Oil filling compartment and cooling fins (oil-immersed cooling system).
1.2 Dual Protection Mechanism
- Plug-in Fuses:Yadda ake gina tsaro a bangaren secondary-side.
- Backup Current-Limiting Fuses:Yadda ake gina tsaro a bangaren primary-side.
- Overload Capacity:Karkashin asali na iya a yi 2-hour sustained overload a 200% rated load; typically modified domestically to 130% rated load for 2 hours.
1.3 Principle Differences vs. Conventional Transformers
Karkashin transformers masu asali sun amfani da layouts "switchgear - transformer - distribution equipment" da dama. Amerika-styled pad-mounted transformers sun amfani da oil-immersed integration don haɓaka cable connections, wanda ya ba su 40%-60% greater structural compactness.
2. Core Differences: Pad-Mounted Transformers vs. Conventional Transformers
|
Comparison Dimension |
Pad-Mounted Transformer |
Conventional Transformer (European-Style) |
Conventional Transformer (Dry-Type) |
|
Volume & Footprint |
~6 m², compact design |
8-30 m², H-shaped layout |
Moderate volume, requires special installation environment |
|
Overload Capacity |
130%-200% rated load |
110%-130% rated load |
110%-120% rated load |
|
Noise Level |
40.5-60 dB (significant low-frequency noise) |
30-40 dB (lower noise) |
Comparable to oil-immersed; more environmentally friendly |
|
Initial Investment |
RMB 400,000-410,000 / unit |
RMB 450,000-560,000 / unit |
Higher than oil-immersed (~RMB 550,000 / unit) |
|
Maintenance Cost |
Medium (requires periodic anti-corrosion work, oil changes) |
Low (lower failure rate) |
Higher (requires specialized, environmentally sensitive maintenance) |
|
Applicable Scenarios |
Space-constrained areas; renewable energy projects; temporary power supply |
High-reliability demand areas; urban core zones |
Fire/sensitive noise zones (e.g., commercial buildings) |
3. Application Benefits of Pad-Mounted Transformers in Typical Scenarios
3.1 Urban Grid Renovation
- Case Study:A Shanghai power utility deployed 1,103 American-style pad-mounts (49% share) in residential communities. A primary school renovation project budgeted RMB 640,000 completed in 15 days.
- Noise Reduction Solution:Implemented "shell - acoustic cotton lining - shell" sound absorption structure, reducing noise from 60dB to below 40dB, compliant with GB 3096 night-time standard.
3.2 Renewable Energy Projects (Wind Farms / Solar PV)
- Cost Efficiency:35/0.69kV wind farm step-up transformer cost RMB 410,000/unit, RMB 100,000-150,000 lower than European-style units. Line losses reduced by 10%-15%.
- Anti-Corrosion Process:Coastal areas utilized "shot blasting derusting + epoxy zinc-rich primer + polyurethane topcoat". Equipment at a Guangdong wind farm showed no corrosion after 8 months.
3.3 Temporary Power & Peripheral Scenarios
- Advantages:Small size (easy transport); elbow connectors enable live-front operation; suitable for construction sites & remote areas.
- Limitations:Requires integration with ring main units (RMUs) to enhance power supply reliability.
4. Optimal Application Scenarios & Selection Guidelines
4.1 Priority Application Scenarios
- Space-constrained areas:Old urban districts, narrow streets.
- Renewable Energy Projects:Wind farms, distributed PV grid connection points.
- Temporary Power Supply:Construction sites, temporary event venues.
- Cost-sensitive projects:Distribution network construction with limited initial investment budget.
4.2 Selection Considerations
- Environmental Adaptation:Use triple-protection coating (epoxy zinc-rich primer + polyurethane topcoat) in high salt-spray regions. Enhanced cooling design required in high-altitude areas.
- Reliability Trade-off:Prioritize European-style units for high-rise buildings and critical public facilities. Avoid American-style units in areas with rapid load growth (capacity increase requires pad reconstruction).
- Noise Control:Utilize noise-reduction enclosures or flexible connections in urban residential zones to mitigate low-frequency noise impact.
