Download the app
  • Three-phase Keypad Smart Energy Meter
Three-phase Keypad Smart Energy Meter
$70.00
Model
TPEM-100
Basic info Product Detail Supplier
Basic info
Brand Wone Store
Model NO. Three-phase Keypad Smart Energy Meter
Rated normal current 100A
Analogue input type Direct input
Communication port support RS485/RF
Number of outputs 1 pulse
Number of inputs 1
Multi-tarff 4 tariffs
Current transformer No
Series GST7666-G
Product Detail

Description

GST7666-G  is  a three-phase multi-function energy meter with embedded communication modules, used to accurately measure energy for commercial, industrial & residential customers. The meter supports optional communication modules of PLC/RF/GPRS/3G/4G, with communication protocol complying with DLMS/COSEM protocol. It could be optionally used in STS-compliant prepayment mode or postpaymentmode .

Feature

  • STS-compliant prepayment.

  • DLMS/COSEM compliant.

  • Built-in load control.

  • Infrared port/RS 485.

  • Tamper detection & recording.

  • Active/reactive energy measurement.

  • LCD display capable of reading without power.

  • Prepayment/postpayment mode switchable.

  • Plug & play PLC/RF/GPRS/3G/4G module.

  • Display scroll button or STS keypad (optional).

  • Programmable warning of power limit & low credit.

  • Dual power source switchable between power grid & solar system.

  • Disconnecting on overload & no-credit condition.

  • Max demand measurement & load profiling(customizable).

Specifications

Main
Range GST
Model NO. GST7666
Product or Componet Type Energy meters
Country of origin China
Complementary
Phase Three-phase
Type of measurement

Active power;current

voltage;Active power
Metering type

Active,

reactive, 

apparent energy (signed, four quadrant)
Device Application Keypad ,Multi-tariff
Accuracy class

Class1.0  active energy IEC62053-21

Class2.0  Reactive energy as IEC62053-23
Input type ---
Rated voltage 230V
Network Frequency 50~60Hz
Technology Type Electronic
Display Type LCD display
Sampling rate ---
Maximum value measured -----
Tariff input Tariff 4
Communication port protocol ---
Communication port support RS485/RF
Local signalling Green indicator light power ON
Yellow flashing LED accuracy checking
alarm overload
Number of inputs ---
Number of Outputs ---
Output voltage ---
Mounting Mode ---
Mounting Support ---
Connections - terminals Maximum cable size 10mm
Standards

IEC62053-21

IEC62053-23
Environment
IP degree of protection P54
Ambient air temperature for operation -25℃~+70℃- IEC
Ambient Air Temperature for Storage -40℃~+85℃
Dimensions 120*68*29/244*165*79
Packing Units
Unit Type of Package 1 PCE
Package 1 Height
Package 1 Width
Package 1 Length
Package 1 Weight


Dimensions

image.png

image.png

image.png

image.png

image.png




Know your supplier
Wone Store
Main Categories
High Voltage Electrical Apparatus/Low Voltage Electrical Apparatus/Wire cable/Instrument meters/New energy/Tester/Production equipment/Generator/Electrical fittings/Integrated Electrical Equipment/Instrument Transformer/Equipment Parts
Business Type
Sales
Highest Annual Export (USD)
$300000000
Professional Experience
1 years
Workplace
1000m²
占位
占位
Related Products
More
Related Knowledges
More
What factors need to be considered when designing a transformer?
What factors need to be considered when designing a transformer?
Transformer design is a complex process that requires consideration of multiple factors to ensure safe and efficient operation. In addition, compliance with international and local regulations is essential to guarantee that transformers meet safety and performance standards. Below are key factors to consider in transformer design and the relevant regulations to follow:Transformer Design Factors: Voltage and Frequency: Determine the input and output voltage levels and the operating frequency. The
Vziman
09/02/2025
What failure modes are possible in a transformer? How to identify and fix these failures?
What failure modes are possible in a transformer? How to identify and fix these failures?
Transformers are critical components in power systems, and various failure modes can affect their operation. Timely identification and resolution of these failure modes are essential to prevent costly downtime and ensure system reliability. Below are some common transformer failure modes, along with methods to identify and address them: Insulation FailureIdentification: Insulation failure leads to decreased insulation resistance, which can be detected through insulation resistance testing (megge
Edwiin
09/02/2025
A hybrid DC circuit breaker
A hybrid DC circuit breaker
Most DC molded-case circuit breakers use natural air arc extinction, and there are typically two arc extinguishing methods: one is conventional opening and closing, where the contacts axially stretch the arc, while the conductive circuit generates a magnetic field that bends and elongates the arc, pulling it lengthwise perpendicular to the arc axis. This not only increases the arc length but also induces lateral motion, enabling air cooling to achieve arc extinction.The other method involves the
Echo
09/02/2025
Working Principle and Arc Extinction Mechanism of Magnetic Blowout Device in DC Circuit Breakers
Working Principle and Arc Extinction Mechanism of Magnetic Blowout Device in DC Circuit Breakers
The arc extinguishing system of a DC circuit breaker is crucial for the safe operation of equipment, as the arc generated during current interruption can damage contacts and compromise insulation.In AC systems, the current naturally passes through zero twice per cycle, and AC circuit breakers take full advantage of these zero-crossing points to extinguish the arc.However, DC systems lack natural current zero crossings, making arc extinction significantly more difficult for DC circuit breakers. T
Felix Spark
09/02/2025
Key Technologies of Low-Voltage DC Solid-State Circuit Breakers
Key Technologies of Low-Voltage DC Solid-State Circuit Breakers
1 Technical Challenges1.1Stability of Device ParallelingIn practical applications, the current-carrying capacity of a single power electronic device is relatively limited. To meet high-current requirements, multiple devices are often connected in parallel. However, parameter variations between devices—such as slight differences in on-resistance and threshold voltage—can cause uneven current distribution during parallel operation. During switching transients, parasitic inductance and capacitance
Dyson
09/02/2025
Can AC and DC circuit breakers be used interchangeably?
Can AC and DC circuit breakers be used interchangeably?
First of all, it must be clarified: AC circuit breakers must not be used to replace DC circuit breakers in DC circuits!Due to differences in arc generation and extinction processes between AC and DC, AC and DC circuit breakers with the same rated values do not have identical capabilities when interrupting DC power. Using AC circuit breakers in place of DC ones, or mixing AC and DC breakers, is one of the main causes of protection miscoordination and unintended upstream tripping.Circuit breakers
Echo
09/02/2025
×
Inquiry
Download
IEE-Business is dedicated to serving the personnel in the global power industry.
Join IEE-Business, not only can you discover power equipment and power knowledge, but also canhnd like - minded friends!
App Store App Store App Store App Store App Store App Store App Store App Store
App Store