Side-Break Switches Akwụrị-ọnụ Akwụkwọ

Overview
TU yana da muhimmanci ƙarin hanyoyi, a cikin duk wasu taurari. An samar da kanta na gine-gine, game da karamin shirye-shiryen daga kan gine-gine, ya zama da kyau a taka hanyar lokaci. Ana iya sanya waɗanda suna aiki a tsawon lokaci da kuma da ƙarin abubuwa. TU-1AS2 na iya a bayyana a cikin tsawon biyu, uku, da hudu don aiki a tsawon dubu ko 90 digiri. Idan an samun kayan aiki mai sauƙi, za ku iya samun ƙarin hanyoyi a kan aiki.

Abubuwan TU Beartrap™
● Aiki mai zaman lafiya—za a iya kwallon kanta ta hanyar lokaci ko kai
● Karamin jawabban silver-plated copper jaw contacts—amfani da hanyoyin repulsion mai karatu a kan magnetic fields wanda ke zama a hukuma a ƙarin ƙarin don a yi aiki a cikin edges.
● Components—An samar da aluminum tubular blade design 6063-T6 don in ba da aiki da ma'adadin current carrying capacity da rigidity. Silver-plated copper profiles na iya a canzawa a kan aiki, kamar haka saboda stationary and moving arcing horns.
●  Blade Action—A cikin ido aiki, an ci gaba da jawabba da jaw contacts don in ba da low resistance current transfer. Akan heavy-duty static blade locking device yana aiki don in bude blade musamman har zuwa temporary faults ko surge currents, kuma ana yanayi don in kara blade further into the jaw.
● Anti-Rollover Device—BearTrap Switch daga Turner tana amfani da patented ramp and pin don in bude blade a cikin jaw.
● Blade Position Indicator—High visibility stickers sun ba da alamomin aiki wanda switch ce open ko closed. Suna da high UV protection kuma ana sanin shi a cikin duk switch.
● Current Transfer—Akwai kawai biyu current transfer points a cikin hinge. Terminal pad na iya thread to a stationary contact block wanda ke bude spring loaded, silver to silver connection, kuma housing transfer current to the blade via a canted coil spring.
● Upgrade-Ability—Ratings na iya zama daga 600 amps zuwa 1200 amps idan an samun bolt-on contact fingers to the jaw.
● Main Bearing Assembly And Stationary Insulator Mounting—Main pivot bearing assembly tana da biyu tapered roller bearings, wadannan suka fitowa da kuma factory lubricated.
● Leveling —An samun leveling screws a cikin movable and stationary insulator mounting flange don in gudanar da insulator stacks. Akwai kuma three bolts a jaw end don small final adjustments.
● Mounting—Duka frames suna da cuta da kuma gine-gine don termination of the transmission line a 10,000 pounds working load. Line angles at full tension suna da limits ga +/-5 Degrees of 90 or 180 Degree dead end. Idan akwai aiki wanda ba a cikin wadannan parameters, da fatan a tuntubi masu ilimi.

Parameters