RWD series Distribution Cable Fault Early Warning and Location Device
Key attributes
| Brand | RW Energy |
| Model NO. | RWD series Distribution Cable Fault Early Warning and Location Device |
| Rated voltage | ≤35kV |
| Rated frequency | 50（Hz） |
| Power Consumption | ≤40W |
| Series | RWD |
Product descriptions from the supplier
Description ：
This device has the functions of real - time monitoring and accurate early - warning. Through advanced sensor technology, it conducts all - round monitoring of the cable's operating status, including important parameters such as current, voltage, temperature, and partial discharge. Once an abnormal fluctuation in the parameters is detected, the system can quickly identify potential fault hazards and issue early - warning signals in a timely manner. This enables maintenance personnel to take corresponding measures before a fault occurs, avoiding power - outage accidents and effectively improving the reliability of power supply.In terms of fault positioning, the device uses a variety of advanced technical means, such as traveling wave ranging and impedance method. When a cable fault occurs, these technologies can quickly and accurately determine the location of the fault point with a very small margin of error. This greatly shortens the time for fault troubleshooting and repair, reducing the power - outage time and its impact on users.This device is widely used in urban distribution networks, industrial parks, commercial centers and other places, providing strong support for ensuring the safety and stability of power supply.
Main function introduction:
Fault location
Fault early - warning
Data collection and analysis
Technology parameters:
Withstand voltage test
Device structure:
Restricted
Distribution Cable Fault Early Warning and Location Device
Catalogue
English
Consulting
Online store
On-time delivery rate
Response time
100.0%
≤4h
Company overview
Workplace: 30000m²
Total staff:
Highest Annual Export(usD): 100000000
Services
Business Type: Design/Manufacture/Sales
Main Categories: High Voltage Electrical Apparatus/New energy/Tester
Whole life care manager
Whole-life care management services for equipment procurement, use, maintenance, and after-sales, ensuring safe operation of electrical equipment, continuous control, and worry-free electricity consumption.
The equipment supplier has passed platform qualification certification and technical evaluation, ensuring compliance, professionalism, and reliability from the source.
Related Products
Related Knowledges
-
Causes and Preventive Measures of Fire and Explosion in Oil Circuit BreakersCauses of Fire and Explosion in Oil Circuit Breakers When the oil level in an oil circuit breaker is too low, the oil layer covering the contacts becomes too thin. Under the effect of the electric arc, the oil decomposes and releases flammable gases. These gases accumulate in the space beneath the top cover, mixing with air to form an explosive mixture, which can ignite or explode under high temperature. If the oil level inside the tank is too high, the released gases have limited space to expanFelix Spark11/06/2025 -
LTB vs DTB vs GIS: HV Circuit Breaker ComparisonThe basic meaning of a high-voltage circuit breaker is, simply put, that under normal conditions, it is used to open (interrupt, trip) and close (make, reclose) circuits, feeders, or specific loads—such as those connected to transformers or capacitor banks. When a fault occurs in the power system, protective relays activate the circuit breaker to interrupt either load current or short-circuit current, thereby ensuring the safe operation of the power system.A high-voltage circuit breaker is a typJames11/06/2025 -
What are the technical measures for loss reduction and energy saving in distribution systems?1.Reasonable Use of TransformersTransformers should be selected with flexible winding configurations according to the power consumption characteristics of industrial enterprises, and load adjustments should be made promptly based on each transformer’s load rate to ensure operation at optimal loading conditions. Three-phase loads on transformers should be kept as balanced as possible; unbalanced operation not only reduces output capacity but also increases losses. Energy-efficient transformers shEcho11/06/2025 -
What are the hazards of high-order harmonics to electrical equipment?Voltage distortion in AC power systems causes unequal intervals between the firing pulses of the control angle in conventional converters, and through positive feedback, it amplifies the system voltage distortion, resulting in unstable rectifier operation. In inverters, continuous commutation failures may occur, preventing normal operation and even damaging commutation equipment.For star-connected transformers, third-order and triplen harmonics can cause third-harmonic oscillation when the windiFelix Spark11/06/2025 -
Causes of Failure in Off-Circuit (De-energized) Tap ChangersI. Faults in Off-Circuit (De-energized) Tap Changers1. Causes of Failure Insufficient spring pressure on tap changer contacts, uneven roller pressure reducing effective contact area, or inadequate mechanical strength of the silver-plated layer leading to severe wear—ultimately burning out the tap changer during operation. Poor contact at tap positions, or poor connections/welding of leads, unable to withstand short-circuit current surges. Incorrect tap position selection during switching, causinFelix Spark11/05/2025 -
What causes a transformer to be noisier under no-load conditions?When a transformer is operating under no-load conditions, it often produces louder noise than under full load. The primary reason is that, with no load on the secondary winding, the primary voltage tends to be slightly higher than nominal. For example, while the rated voltage is typically 10 kV, the actual no-load voltage may reach around 10.5 kV.This elevated voltage increases the magnetic flux density (B) in the core. According to the formula:B = 45 × Et / S(where Et is the designed volts-per-Noah11/05/2025
Related Solutions
-
Distribution automation systems solutionsWhat are the difficulties in overhead line operation and maintenance?Difficulty one:Overhead lines of distribution network have wide coverage,complicatedterrain,many radiation branches and distributed power supply,resultingin "many line faults and difficulty in fault troubleshooting".Difficulty Two:Manual troubleshooting is time-consuming and laborious.Meanwhile,therunning current,voltage and switching state of the line cannot be graspedin real time,because of the lack of intelligent technical mRW Energy04/22/2025 -
RW8000 DMS Distribution Management System SolutionsOverviewNowadays, the development trend of power grid is intellectualization. As an important part of power grid, the power distribution system is very close to the customers and it has to run properly. The distribution management system (DMS）played an important role in it.Introduction:RW8000 power distribution management system (DMS) is designed for the smart grids. It is based on real-time application, centered on distribution network operation and management, focusing on the business processRW Energy09/07/2023 -
High-Precision Electrical Parameter Monitoring System Solution1.IntroductionWith the increasingly stringent requirements for power supply quality in high-end facilities such as precision manufacturing, medical diagnosis, and data centers, traditional power monitoring systems, due to their low sampling accuracy and weak data analysis capabilities, can no longer meet the demand for deep insight and precise management of power quality. In response, we are introducing a new generation High-Precision Electrical Parameter Monitoring System. With millisecond-lRW Energy09/28/2025
Haven't found the right supplier yet? Let matching verified suppliers find you.
Get Quotation Now
Send inquiry
Download
Get the IEE Business Application
Use the IEE-Business app to find equipment, obtain solutions, connect with experts, and participate in industry collaboration anytime, anywhere—fully supporting the development of your power projects and business.
